HighPoint R1000 Series Bedienungsanleitung

Andere Handbücher für R1000 Series

2

Dieses Handbuch passt für folgende Modelle

2

Inhaltsverzeichnis

Andere HighPoint Controller Handbücher

HighPoint

HighPoint RocketU Quad USB3.0 Bedienungsanleitung

HighPoint

HighPoint SSD7103 Bedienungsanleitung

HighPoint

HighPoint HPT366 Installations- und Benutzerhandbuch

HighPoint

HighPoint Rocket Dual eSATA 6Gb/s For Mac Bedienungsanleitung

HighPoint

HighPoint SSD7580A Bedienungsanleitung

HighPoint

HighPoint SSD7180 Bedienungsanleitung

HighPoint

HighPoint RR2720A Bedienungsanleitung

HighPoint

HighPoint RocketRAID 644L Bedienungsanleitung

HighPoint

HighPoint ATA-133 RAID Bedienungsanleitung

HighPoint

HighPoint SSD7103 Bedienungsanleitung

HighPoint

HighPoint SSD7101A-1 Bedienungsanleitung

HighPoint

HighPoint RR64 L Series Bedienungsanleitung

HighPoint

HighPoint RocketRAID 3G mini SAS HBA Series Bedienungsanleitung

HighPoint

HighPoint Rocket 760A Bedienungsanleitung

HighPoint

HighPoint Rocket 620 Bedienungsanleitung

HighPoint

HighPoint SSD7540 Bedienungsanleitung

HighPoint

HighPoint RocketRAID 37 Series Bedienungsanleitung

HighPoint

HighPoint SSD7505 Bedienungsanleitung

HighPoint

HighPoint Rocket 700L Series Bedienungsanleitung

HighPoint

HighPoint RR640L Bedienungsanleitung

HighPoint

HighPoint RocketRAID 3G mini-SAS HBA Series Bedienungsanleitung

HighPoint

HighPoint SSD7105 Bedienungsanleitung

HighPoint

HighPoint RocketRAID 2840A Bedienungsanleitung

HighPoint

HighPoint RocketRAID 37 Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

1

R1108

8x M.2 Port to PCIe 3.0x16 NVMe HBA

Quick Installation Guide

V1.00

2

System Requirements

PC Requirements

•System with a free PCIe3.0 (or 4.0) x16 slot

•Windows 10 or later, Windows Server 2019

•Linux Kernel 3.10 or later

•macOS 10.13 or later

•FreeBSD 12.1 and later

R1108 Kit Content

•R1108 Controller Card

•Quick Installation Guide

3

R1108 Hardware

Front View

Low-Noise fans

Full-length anodized aluminum heat sink

PCIe 3.0 x16 Host Interface

4

R1108 Hardware Installation:

Step 1. On the rear of the R1108, remove the six screws that secure the

unit’s heat sink to the PCB.

Step 2. Carefully remove fan’s power cable from the right-side of the

heatsink as shown below, then carefully flip the heatsink to the

left (like turning a page from a book).

Note: Take care when moving the heatsink to prevent damaging

the left fan’s power cable.

5

Step 3. This will expose the two thermal pads. The blue film must be

removed from each pad before reinstalling this panel. This film

protects the pads from damage and foreign objects prior to

installation, but will also prevent the pad from transferring heat

away from the NVMe SSD’s and controller componentry.

Step 4. These 8 screws are used to install the NVMe SSD’s.

6

Step 5. Please remove these screws from each of the M.2 slots.

Step 6. Gently insert the SSD into the slot.

Step 7. Refasten the screw to secure the SSD.

Repeat Steps 5 to 7 to install the remaining SSDs.

The following example shows eight M.2 SSDs installed into Ports 1-8:

7

Step 8. After installing all SSDs, carefully flip the heatsink to the right.

Note: Make sure the SSD’s are carefully, but securely installed

into each M.2 port. Loose connections can cause a variety of

stability and performance issues, and may ultimately result in

data loss.

Note: Make sure the heatsink/fan panel is properly aligned with

the controller board (PCB), and that it makes full contact with the

thermal pads before refastening it to the NVMe HBA. If the

heatsink is improperly installed, it will be unable to sufficiently

cool the NVMe SSD’s and controller componentry, which may

result in damage to the SSD’s or controller hardware,

performance loss, unstable I/O, and the loss of data.

Step 9. Carefully reinsert in the power supply cable of the cooling fan

that was removed in step 2.

8

Step 10. On the rear of the R1108, refasten the 6 screws that were

removed in step 1.

Step 11. Power up the SSD external power supply

Note: If the external power supply is not powered on, the SSDs

may drop offline or remain undetected, which could lead to data

loss.

R1108 relies on two power sources to support eight SSDs; power

supplied through the PCIe bus, and power from the system’s PSU

via an external power cable. If the external cable is not connected,

there will be insufficient power to support all 8 SSD’s; this may

cause the SSDs to drop offline.

9

Note

：

The R1108 does not require the external power cord when

used with 2019 Mac Pro systems.

10

Resources

We recommend visiting the R1108 Series Product Page for the latest

documentation.

Document Downloads:

https://www.highpoint-tech.com/USA_new/series-r1000-fan-overview.html

Customer Support

If you encounter any problems while utilizing the R1108, or have any

questions about this or any other HighPoint Technologies, Inc. product,

feel free to contact our Customer Support Department.

Web Support:

https://www.highpoint-tech.com/websupport/main.php

HighPoint Technologies, Inc. websites:

https://www.highpoint-tech.com

© Copyright 2021 HighPoint Technologies, Inc. All rights reserved.