HighPoint SSD7540 Bedienungsanleitung

SSD7540

8x M.2 Port to PCIe 4.0x16 NVMe RAID Controller

Quick Installation Guide

V1.08

System Requirements

PC Requirements

•System with a free PCIe4.0 (or 3.0) x16 slot

•Windows 11, 10 / Server 2022, 2019, 2016, 2012R2 / Microsoft

Hyper-V

•RHEL/Debian/Ubuntu/Fedora/Proxmox/Xenserver/ Rocky Linux

(Linux kernel 3.10 and later)

•Arch Linux (Kernel 5.17.5 and above)

•macOS 10.13.6 ~ macOS 13.x

SSD7540 Kit Content

•SSD7540 Controller Card

•Quick Installation Guide

SSD7540 Hardware

Front View

Full-Length anodized aluminum heat sink

PCIe 4.0 x16 Host Interface

Full Height form factor

0000

Low-Noise Cooling Fan

External power port

Hardware Installation

Step 1. On the rear of the SSD7540, remove the six screws that secure

the unit’s heat sink to the PCB.

Step 2. Carefully remove the fan’s power cable from the right-side of

the heatsink as shown below, then carefully flip the heatsink to the

left (like turning a page from a book).

Note: Take care when moving the heatsink to prevent damaging

the left fan’s power cable.

Step 3. After removing the casing, carefully turn it over to view the

thermal pad. The blue films must be removed from the pad before

reinstalling the panel. These films protect the pad from damage and

foreign objects prior to installation, however, they will also prevent the

thermal pad from conducting the heat away from the NVMe SSD's if

we don't remove it.

Step 4. These 8 screws are used to install the NVMe SSD’s.

Step 5. Please remove these screws from each of the M.2 slots.

Step 6. Gently insert the SSD into the slot.

Note: Please make sure all disks are clean before you insert them

into the slot to avoid unexpected situations.

Step 7. Refasten the screw to secure the SSD.

Repeat Steps 5 to 7 to install the remaining SSDs.

The following example shows eight Gen4 SSDs installed into Ports 1-8:

Step 8. After installing all SSDs, carefully flip the heatsink to the right.

Port

Note: Make sure the SSDs are carefully, but securely installed into

each M.2 port. Loose connections can cause a variety of stability

and performance issues, and may ultimately result in data loss.

Step 9. Carefully reinsert in the power supply cable of the cooling fan

that was removed in step 2.

Step 10. On the rear of the SSD7540, refasten the 6 screws that were

removed in step 1.

Note

：

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the

thermal pad, before refastening it to the SSD7540. If the cover is

improperly installed, the fan and thermal pad will be unable to

sufficiently cool the NVMe SSD’s and controller componentry,

which may result in damage to the SSD’s or controller hardware,

performance loss, unstable I/O, and the loss of data.

Step 11. Power up the SSD external power supply

Note: If the external power supply is not powered on, the SSDs

may drop offline or remain undetected, which could lead to data

loss.

SSD7540 relies on two power sources to support eight SSDs;

power supplied through the PCIe bus, and power from the

system’s PSU via an external 6 pin PCIe power cable. If the

external cable is not connected, there will be insufficient power to

support all 8 SSD’s; this may cause the SSDs to drop offline.

Note

：

The SSD7540 does not require the external power cord

when used with Mac Pro 2019

Note: Please be sure to connect NVMe before using the product to

reduce the occurrence of unnecessary errors!

Note: Install the driver in the system first and then install the board

Connect 6 pin PCIe power cable

Resources

A variety of manuals, guides and FAQ’s are available for the SSD7540

RAID controller.

In addition, we recommend visiting the Software Downloads webpage

for the latest drivers, management interfaces, and installation guides.

For Software Downloads, Documentation and more information

about this product, please visit the following website:

https://www.highpoint-tech.com/gen4-nvme-m2

FAQ & Troubleshooting:

FAQ - HighPoint Technologies, Inc. (helpjuice.com)

Andere Handbücher für SSD7540

Inhaltsverzeichnis

Andere HighPoint Controller Handbücher

HighPoint

HighPoint RocketRAID 644L Bedienungsanleitung

HighPoint

HighPoint ATA-133 RAID Bedienungsanleitung

HighPoint

HighPoint SSD7110 Merkblatt

HighPoint

HighPoint SSD7000 Series Bedienungsanleitung

HighPoint

HighPoint SSD7120 Bedienungsanleitung

HighPoint

HighPoint RocketRAID mini SAS 3G HBA Series Bedienungsanleitung

HighPoint

HighPoint RocketU 1142A Bedienungsanleitung

HighPoint

HighPoint RocketRAID 2711 Bedienungsanleitung

HighPoint

HighPoint SSD7103 Bedienungsanleitung

HighPoint

HighPoint RocketRAID 2840A Bedienungsanleitung

HighPoint

HighPoint SSD7103 Bedienungsanleitung

HighPoint

HighPoint Rocket Dual eSATA 6Gb/s For Mac Bedienungsanleitung

HighPoint

HighPoint SSD7110 Bedienungsanleitung

HighPoint

HighPoint RocketRAID 3G mini SAS HBA Series Bedienungsanleitung

HighPoint

HighPoint R1000 Series Bedienungsanleitung

HighPoint

HighPoint RocketRAID 2722A Bedienungsanleitung

HighPoint

HighPoint RocketRAID eSATA 6G series Bedienungsanleitung

HighPoint

HighPoint Rocket 760A Bedienungsanleitung

HighPoint

HighPoint SSD7749E Bedienungsanleitung

HighPoint

HighPoint RocketRAID 174x Bedienungsanleitung

HighPoint

HighPoint SSD7105 Bedienungsanleitung

HighPoint

HighPoint RocketRAID 37 Series Bedienungsanleitung

HighPoint

HighPoint SSD7580B Bedienungsanleitung

HighPoint

HighPoint SSD7000 Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch