HIK VISION DS-K1T804A Series Bedienungsanleitung

DS-K1T804A Series Fingerprint Access

Control Terminal

User Manual

UD18256B-A

Legal Informaon

reserved.

About this Manual

The Manual includes instrucons for using and managing the

Product. Pictures, charts, images and all other informaon

hereinaer are for descripon and explanaon only. The

informaon contained in the Manual is subject to change,

without noce, due to rmware updates or other reasons. Please

nd the latest version of this Manual at the Hikvision website

( hps://www.hikvision.com/ ).

Please use this Manual with the guidance and assistance of

professionals trained in supporng the Product.

Trademarks

and other Hikvision's trademarks

and logos are the properes of Hikvision in various jurisdicons.

Other trademarks and logos menoned are the properes of

their respecve owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS

MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,

SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH

ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A

PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT

YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU

FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF

BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,

CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING

NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN

CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF

HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES

FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE

ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY

LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,

HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET

SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL

APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR

ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN

A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD

PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA

PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE

THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS

DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF

CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE

CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE

NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS

ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND

THE APPLICABLE LAW, THE LATER PREVAILS.

Data Protecon

During the use of device, personal data will be collected, stored

and processed. To protect data, the development of Hikvision

devices incorporates privacy by design principles. For example,

for device with facial recognion features, biometrics data is

stored in your device with encrypon method; for ngerprint

device, only ngerprint template will be saved, which is

impossible to reconstruct a ngerprint image.

As data controller, you are advised to collect, store, process and

transfer data in accordance with the applicable data protecon

laws and regulaons, including without limitaon, conducng

security controls to safeguard personal data, such as,

implemenng reasonable administrave and physical security

controls, conduct periodic reviews and assessments of the

eecveness of your security controls.

Symbol Convenons

The symbols that may be found in this document are dened as

follows.

Symbol Descripon

Danger Indicates a hazardous situaon which, if not avoided,

will or could result in death or serious injury.

Cauon

Indicates a potenally hazardous situaon which, if

not avoided, could result in equipment damage, data

loss, performance degradaon, or unexpected

results.

Note Provides addional informaon to emphasize or

supplement important points of the main text.

iii

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modicaon not expressly

approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide

reasonable protecon against harmful interference in a

residenal installaon. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in

accordance with the instrucons, may cause harmful interference

to radio communicaons. However, there is no guarantee that

interference will not occur in a parcular installaon. If this

equipment does cause harmful interference to radio or television

recepon, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separaon between the equipment and receiver.

—Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for

help

This equipment should be installed and operated with a minimum

distance 20cm between the radiator and your body.

FCC Condions

This device complies with part 15 of the FCC Rules. Operaon is

subject to the following two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operaon.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and

comply therefore with the applicable

harmonized European standards listed under

the EMC Direcve 2014/30/EU, the RoHS

Direcve 2011/65/EU

2012/19/EU (WEEE direcve): Products marked

with this symbol cannot be disposed of as

unsorted municipal waste in the European

Union. For proper recycling, return this product

to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at

designated collecon points. For more

informaon see: www.recyclethis.info

2006/66/EC (baery direcve): This product

contains a baery that cannot be disposed of as

unsorted municipal waste in the European

Union. See the product documentaon for

specic baery informaon. The baery is

marked with this symbol, which may include

leering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the

baery to your supplier or to a designated

collecon point. For more informaon

see:www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards

requirements.

This device complies with Industry Canada licence-exempt RSS

standard(s). Operaon is subject to the following two condions:

1. this device may not cause interference, and

2. this device must accept any interference, including

interference that may cause undesired operaon of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada

applicables aux appareils radioexempts de licence. L'exploitaon

est autorisée aux deux condions suivantes :

1. l'appareil ne doit pas produire de brouillage, et

2. l'ulisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est suscepble d'en

compromere le fonconnement.

Under Industry Canada regulaons, this radio transmier may

only operate using an antenna of a type and maximum (or lesser)

gain approved for the transmier by Industry Canada. To reduce

potenal radio interference to other users, the antenna type and

its gain should be so chosen that the equivalent isotropically

radiated power (e.i.r.p.) is not more than that necessary for

successful communicaon.

Conformément à la réglementaon d'Industrie Canada, le présent

émeeur radio peut fonconner avec une antenne d'un type et

d'un gain maximal (ou inférieur) approuvé pour l'émeeur par

Industrie Canada. Dans le but de réduire les risques de brouillage

radioélectrique à l'intenon des autres ulisateurs, il faut choisir

le type d'antenne et son gain de sorte que la puissance isotrope

rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité

nécessaire à l'établissement d'une communicaon sasfaisante.

This equipment should be installed and operated with a minimum

distance 20cm between the radiator and your body.

Cet équipement doit être installé et ulisé à une distance

minimale de 20 cm entre le radiateur et votre corps.

Safety Instrucon

These instrucons are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precauon measure is divided into Dangers and Cauons:

Dangers: Neglecng any of the warnings may cause serious injury

or death.

Cauons: Neglecng any of the cauons may cause injury or

equipment damage.

Dangers: Follow these safeguards

to prevent serious injury or death.

Cauons: Follow these precauons

to prevent potenal injury or

material damage.

Dangers

•All the electronic operaon should be strictly compliance with

the electrical safety regulaons, re prevenon regulaons and

other related regulaons in your local region.

•Please use the power adapter, which is provided by normal

company. The power consumpon cannot be less than the

required value.

•Do not connect several devices to one power adapter as

adapter overload may cause over-heat or re hazard.

•Please make sure that the power has been disconnected

before you wire, install or dismantle the device.

•When the product is installed on wall or ceiling, the device

shall be rmly xed.

•If smoke, odors or noise rise from the device, turn o the

power at once and unplug the power cable, and then please

contact the service center.

•Do not ingest baery, Chemical Burn Hazard.

This product contains a coin/buon cell baery. If the coin/

buon cell baery is swallowed, it can cause severe internal

burns in just 2 hours and can lead to death.

Keep new and used baeries away from children. If the baery

compartment does not close securely, stop using the product

and keep it away from children. If you think baeries might

have been swallowed or placed inside any part of the body,

seek immediate medical aenon.

•If the product does not work properly, please contact your

dealer or the nearest service center. Never aempt to

disassemble the device yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.)

Cauons

•This equipment is not suitable for use in locaons where

children are likely to be present.

•Do not drop the device or subject it to physical shock, and do

not expose it to high electromagnesm radiaon. Avoid the

vii

equipment installaon on vibraons surface or places subject

to shock (ignorance can cause equipment damage).

•Do not place the device in extremely hot (refer to the

specicaon of the device for the detailed operang

temperature), cold, dusty or damp locaons, and do not

expose it to high electromagnec radiaon.

•The device cover for indoor use shall be kept from rain and

moisture.

•Exposing the equipment to direct sun light, low venlaon or

heat source such as heater or radiator is forbidden (ignorance

can cause re danger).

•Do not aim the device at the sun or extra bright places. A

blooming or smear may occur otherwise (which is not a

malfuncon however), and aecng the endurance of sensor

at the same me.

•Please use the provided glove when open up the device cover,

avoid direct contact with the device cover, because the acidic

sweat of the ngers may erode the surface coang of the

device cover.

•Please use a so and dry cloth when clean inside and outside

surfaces of the device cover, do not use alkaline detergents.

•Please keep all wrappers aer unpack them for future use. In

case of any failure occurred, you need to return the device to

the factory with the original wrapper. Transportaon without

the original wrapper may result in damage on the device and

lead to addional costs.

•Improper use or replacement of the baery may result in

hazard of explosion. Replace with the same or equivalent type

only. Dispose of used baeries according to the instrucons

provided by the baery manufacturer.

•You can view the device License via the website: hp://

opensource.hikvision.com/Home/List?id=46.

viii

Available Models

The ngerprint access control terminal contains the following

models:

Product Name Model Descripon

Fingerprint Access

Control Terminal

DS-K1T804AF Supports ngerprint

only.

DS-K1T804AMF Supports presenng

Mifare card.

DS-K1T804AEF Supports presenng

EM card.

Use only power supplies listed in the user instrucons:

Model Manufacturer Standard

DSA-12PFT-12FUK

120100

Dee Van Enterprise

Co., Ltd. BS

DSA-12PFT-12FAU

120100

Dee Van Enterprise

Co., Ltd. AS

DSA-12PFT-12FIN

120100

Dee Van Enterprise

Co., Ltd. IS

DSA-12PFT-12FUS

120100

Dee Van Enterprise

Co., Ltd. IEC

DSA-12PFT-12 FBZ

120100

Dee Van Enterprise

Co., Ltd. NBR

ADS-12B-12 12012E Shenzhen Honor

Electronics Co., Ltd. IEC

ADS-12B-12 12012E Shenzhen Honor

Electronics Co., Ltd. NEMA

ADS-12B-12 12012E Shenzhen Honor

Electronics Co., Ltd. NBR

ADS-12B-12 12012E Shenzhen Honor

Electronics Co., Ltd. BS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HIK VISION IP-Zugriffskontrollsysteme Handbücher

HIK VISION

HIK VISION DS-K2600 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-K1A802 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-K281 Series Bedienungsanleitung

HIK VISION

HIK VISION UD12126B-B Bedienungsanleitung

HIK VISION

HIK VISION DS-K2600 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-K3M200 Bedienungsanleitung

HIK VISION

HIK VISION DS-K5603-Z Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T6QT-F43 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-K1TA70MI-T Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T804EF Bedienungsanleitung

HIK VISION

HIK VISION DS-K2802 Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T105M Sicherheitsleitfaden

HIK VISION

HIK VISION UD06519B-A Bedienungsanleitung

HIK VISION

HIK VISION DS-TMT201-D Bedienungsanleitung

HIK VISION

HIK VISION DS-K2801 Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T804AMF Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T501SF Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T804B Series Bedienungsanleitung

HIK VISION

HIK VISION 26 series Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T105 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T501 Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T502 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T501SF Bedienungsanleitung

HIK VISION

HIK VISION DS-PTA-WL-868 Bedienungsanleitung

Beliebte IP-Zugriffskontrollsysteme Handbücher anderer Marken

ZKTeco

ZKTeco SpeedFace-V5L Bedienungsanleitung

Jantar

Jantar REX A-1-9 Bedienungsanleitung

2N Access Unit Merkblatt

Kedacom

Kedacom KSCA120 Series Bedienungsanleitung

H3C

H3C WX2880X Bedienungsanleitung

G4S

G4S S870-EX Leitfaden

PRASTEL

PRASTEL M2000PE Bedienungsanleitung

Allegion

Allegion interflex IF-281 Cylinder Bedienungsanleitung

TECOM

TECOM TS1067E Bedienungsanleitung

Fermax

Fermax Memokey 100C Benutzerhandbuch

Fermax

Fermax CITYLINE MEMOKEY Bedienungsanleitung

Software House

Software House iSTAR Pro 2U RM Bedienungsanleitung

AKCP

AKCP SP+ Bedienungsanleitung

Bpt

Bpt HNA/102 Bedienungsanleitung

Civintec

Civintec CV9601T-T-1F Bedienungsanleitung

BioMax

BioMax N-X90W Bedienungsanleitung

ZKTeco

ZKTeco OP-200 Bedienungsanleitung

FingerTec

FingerTec s-Kadex Bedienungsanleitung