HIK VISION DS-2AE714 Bedienungsanleitung

IR Speed Dome

User Manual

V1.0.0

Hikvision Digital Technology Co., Ltd.

http://www.hikvision.com

Thank you for purchasing our product. If there is any question or request, please do not hesitate to

contact the dealer.

This manual is applicable to the IR Speed Dome.

This manual may contain several technically inaccurate places or printing errors, and the content is

subject to change without notice. The updates will be added into the new version of this manual.

We will readily improve or update the products or procedures described in the manual.

The content in this installation guide is only for your reference! If there is inconsistency between the

image and the actual product, the actual product shall govern.

The components, assemblies and accessories mentioned in this guide is only for illustration, not

standing for the exact equipment of the purchased model, please take the packing list as the

standard.

IR Speed Dome User Manual

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the limits for a digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and

comply therefore with the applicable harmonized European standards listed under the

Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC.

2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as

unsorted municipal waste in the European Union. For proper recycling, return this product

to your local supplier upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of

as unsorted municipal waste in the European Union. See the product documentation for

specific battery information. The battery is marked with this symbol, which may include

lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the

battery to your supplier or to a designated collection point. For more information see:

www.recyclethis.info.

IR Speed Dome User Manual

Safety Warnings and Cautions

Please pay attention to the following warnings and cautions:

Hazardous Voltage may be present: Special measures and precautions must be taken when

using this device. Some potentials (voltages) on the device may present a hazard to the user.

This device should only be used by Employees from our company with knowledge and training in

working with these types of devices that contain live circuits.

Power Supply Hazardous Voltage: AC mains voltages are present within the power supply assembly.

This device must be connected to a UL approved, completely enclosed power supply, of the proper

rated voltage and current. No user serviceable parts inside the power supply.

System Grounding (Earthing): To avoid shock, ensure that all AC wiring is not exposed and that the

earth grounding is maintained. Ensure that any equipment to which this device will be attached is

also connected to properly wired grounded receptacles and are approved medical devices.

Power Connect and Disconnect: The AC power supply cord is the main disconnect device to

mains (AC power).The socket outlet shall be installed near the equipment and shall be

readily accessible.

Installation and Maintenance: Do not connect/disconnect any cables to or perform

installation/maintenance on this device during an electrical storm.

Power Cord Requirements: The connector that plugs into the wall outlet must be a

grounding-type male plug designed for use in your region. It must have certification marks

showing certification by an agency in your region. The connector that plugs into the AC receptacle

on the power supply must be an IEC 320, sheet C13, female connector. See the following website for

more information http://kropla.com/electric2.htm.

Lithium Battery: This device contains a Lithium Battery. There is a risk of explosion if the battery is

replaced by an incorrect type. Dispose of used batteries according to the vendor’s instructions and

in accordance with local environmental regulations.

Perchlorate Material: Special handling may apply. See

www.dtsc.ca.gov/hazardouswaste/perchlorate. This notice is required by California Code of

Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate Materials.

This device includes a battery which contains perchlorate material.

Taiwan battery recycling:

Please recycle batteries.

IR Speed Dome User Manual

Thermal and Mechanical Injury: Some components such as heat sinks, power

regulators, and processors may be hot; care should be taken to avoid contact with

these components.

Electro Magnetic Interference: This equipment has not been tested for compliance with emissions

limits of FCC and similar international regulations. This device is not, and may not be, offered for

sale or lease, or sold, or leased until authorization from the United States FCC or its equivalent in

other countries has been obtained. Use of this equipment in a residential location is prohibited. This

equipment generates, uses and can radiate radio frequency energy which may result in harmful

interference to radio communications. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment on and off, the user is

required to take measures to eliminate the interference or discontinue the use of this equipment.

Lead Content:

Please recycle this device in a responsible manner. Refer to local environmental

regulations for proper recycling; do not dispose of device in unsorted municipal waste.

IR Speed Dome User Manual

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or

property loss. The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings:

Follow these safeguards to prevent

serious injury or death.

Cautions:

Follow these precautions to

prevent potential injury or

material damage.

Warnings

1. In the use of the product, you must be strict compliance with the electrical safety regulations of

the nation and region.

2. Please use the power adapter, which is provided by normal company. The standard of the power

adapter is AC24V/3A.

3. Do not connect several devices to one power adapter as adapter overload may cause over-heat

or fire hazard.

4. Please make sure that the plug is firmly connected on the power socket.

5. When the product is installed on wall or ceiling, the device shall be firmly fixed.

6. If smoke, odors or noise rise from the device, turn off the power at once and unplug the power

cable, and then please contact the service center.

7. If the product does not work properly, please contact your dealer or the nearest service center.

Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

Cautions

1. Do not drop the dome or subject it to physical shock, and do not expose it to high

electromagnetism radiation. Avoid the equipment installation on vibrations surface or places

subject to shock (ignorance can cause equipment damage).

2. Do not place the dome in extremely hot, cold (the operating temperature shall be -30°C ~ +65°C),

dusty or damp locations, or fire or electrical shock will occur otherwise.

3. The dome cover for indoor use shall be kept from rain and moisture.

4. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or

radiator is forbidden (ignorance can cause fire danger).

5. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur

IR Speed Dome User Manual

otherwise (which is not a malfunction however), and affecting the endurance of CCD at the

same time.

6. Please use the provided glove when open up the dome cover, avoid direct contact with the

dome cover, because the acidic sweat of the fingers may erode the surface coating of the dome

cover.

7. Please use a soft and dry cloth when clean inside and outside surfaces of the dome cover, do not

use alkaline detergents.

IR Speed Dome User Manual

Contents

Chapter 1 Introduction ..................................................................................................................................1

1.1 Production Features.....................................................................................................................................................1

Chapter 2 Getting Started ..............................................................................................................................2

2.1 Power on Self-test........................................................................................................................................................2

2.2 System-defined Presets ...............................................................................................................................................3

2.3 On Screen Display ........................................................................................................................................................3

Chapter 3 Menu Operation ............................................................................................................................4

3.1 Main Menu ...................................................................................................................................................................4

3.2 Dome Setup..................................................................................................................................................................4

3.2.1 Configuring the System Parameters .......................................................................................................................5

3.2.2 Configuring the Camera Settings ............................................................................................................................7

3.2.3 Configuring the PTZ Parameters.............................................................................................................................9

3.2.4 Configuring the IR Parameter Setup.....................................................................................................................11

3.2.5 Configuring the Patrol ...........................................................................................................................................12

3.2.6 Configuring the Pattern.........................................................................................................................................14

3.2.7 Configuring the Time Tasks...................................................................................................................................15

3.2.8 Configuring the Privacy Mask ...............................................................................................................................17

3.3 Restoring the Default Settings ..................................................................................................................................18

3.4 Restoring the Camera Settings..................................................................................................................................19

3.5 Rebooting the Dome..................................................................................................................................................19

Appendix 20

Appendix 1 Lightning & Surge Protection .............................................................................................................................20

Appendix 2 RS485 Bus Connection........................................................................................................................................21

Appendix 3 24VAC Wire Gauge & Transmission Distance....................................................................................................24

Appendix 4 Table of Wire Gauge Standards..........................................................................................................................25

Glossary 26

IR Speed Dome User Manual

Chapter 1 Introduction

1.1 Production Features

IR speed dome adopts a high-performance integrated sensor with the auto-focus and auto-white

balance function. With a built-in pan/tilt unit, the IR speed dome features in highly sensitive

response and reliable performance. The outstanding features are shown as below:

Adopt 1/4" high performance CCD, which ensures the image quality.

Support 3D-Positioning function, which can locate the target quickly and correctly.

Built-in temperature sensor, which can display the internal temperature of the camera.

Support the scheduled preset, patrol, pattern, and auto-scan functions.

Support both English and Chinese, and support operation prompts which make it easier to

operate.

Ingress protection level reaches IP66.

With the above features, the IR speed dome can be widely used in various surveillance fields, such

as forest, railway, airport, harbor, oil field, plaza, park, scenic spot, street, train station, stadium, etc.

1.2 Appearance

Figure 1-1 IR speed dome

IR Speed Dome User Manual

Chapter 2 Getting Started

Before you start:

You can operate the speed dome using a control device. The control devices include the control

keyboards, DVRs, DVSs, etc. In this and the following chapters, operation of the speed dome by the

IE browser of a DVR is taken as an example.

Note: Please make sure that the baudrate, data bit and address of the speed dome have been

configured to the same as those of the control device. Please refer to Table 2-1 for details of the

configuration.

2.1 Power on Self-test Actions

After the power is connected, the IR dome performs a series of POST (power on self-test) which

includes the lens actions and the pan and tilt movements. After the power on self-test finished, the

system information displays for 2 minutes on the live view screen shown below.

ADDRESS 0

COM FORMAT 2400,8,1

PROTOCOL SELF ADAPTIVE

SOFT VERSION 1.00

HARD VERSION 1.00

BUILD DATE 12 08 31

PAN CHECKING...

Figure 2-1 System Information

Table 2-1 Description of System Information

System Info

Description

ADDRESS

The address of the speed dome. The default value is 0

COM FORMAT

The communication settings of the speed dome.

Baudrate(default 2400), data bit(8 digit) and stop bit(1 digit).

SOFT VERSION

The version of the software.

HARD VERSION

The version of the hardware.

BUILD DATE

The date when the program of the software is compiled.

Andere Handbücher für DS-2AE714

Inhaltsverzeichnis

Andere HIK VISION Sicherheitskamera Handbücher

HIK VISION

HIK VISION DS-2CE72DF3T-LSE Bedienungsanleitung

HIK VISION

HIK VISION DS-T1 SERIES Gebrauchsanweisung

HIK VISION

HIK VISION TURBO HD H0T Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD852MF-E Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2T46G2-ISU-SL Bedienungsanleitung

HIK VISION

HIK VISION IDS-2CD70C5G0-AP Bedienungsanleitung

HIK VISION

HIK VISION HWP-N2404IH-DE3 Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2555FWD-I Bedienungs- und Wartungsanleitung

HIK VISION

HIK VISION DS-2TD2628-7/QA/GLT Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD DS-2CE57H0T-VPITE Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE16H0T-ITPF Bedienungsanleitung

HIK VISION

HIK VISION DS-2XE6252F-IS Bedienungsanleitung

HIK VISION

HIK VISION DS-2XE Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD3786G2-IZS Bedienungsanleitung

HIK VISION

HIK VISION DE4 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD6362F-I Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD6362F-I Benutzerhandbuch

HIK VISION

HIK VISION TURBO HD DS-2CE16H1T-IT1E Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2D21G0/M-D/NF Bedienungsanleitung

HIK VISION

HIK VISION DS-2ZMN3607 Bedienungsanleitung

HIK VISION

HIK VISION U7T Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE56D1T-IR3Z Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD20x2-I Bedienungsanleitung

HIK VISION

HIK VISION DS-2DF1-574D Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung