Hillyard TRIDENT XM13SC Bedienungsanleitung

SERVICE MANUAL

TRIDENT XM13SC

Version: AB

Date: October 4, 2017

Document Number:10055555

Contents

I Product Introduction 4

1 Serial Number and Technical Support 5

1.1 The Serial Tag ................................. 5

1.2 Serial Tag location ............................... 5

2 Main Technical Features 6

II Anomalies Resolution Guide 7

3 Troubleshooting Guide 8

3.1 Basic Guide ................................... 8

3.2 Advanced Guide ................................ 13

4 Disassembling Procedures 19

4.1 Electrical Installation ............................. 20

4.2 Mechanical Friction System ......................... 22

4.3 Drying System ................................. 23

4.4 Frame and Traction System ......................... 24

4.5 Solution Delivery System ........................... 25

III Machine Description 26

5 Electrical System 27

5.1 Structure .................................... 27

5.2 Description ................................... 27

5.3 Location of Electrical components ...................... 28

5.4 Maintenance and Checks ........................... 32

5.5 Programming .................................. 33

5.6 Alarm Table ................................... 36

5.7 Menu tables ................................... 37

6 Mechanical Rubbing System 40

6.1 Structure .................................... 40

6.2 Description: ................................... 40

6.3 Maintenance and checks ........................... 41

7 Drying System 43

7.1 Structure .................................... 43

7.2 Description ................................... 43

7.3 Adjustments .................................. 44

7.4 Maintenance and Checks ........................... 44

8 Machine Frame and Traction System 47

8.1 Structure .................................... 47

8.2 Description ................................... 47

8.3 Maintenance and Checks ........................... 47

9 Cleaning Solution Supply System 48

9.1 Structure .................................... 48

9.2 Description: ................................... 48

9.3 Maintenance and Checks ........................... 49

10 Consumable & Recommended Spare Parts 50

10.1Consumable Spare Parts ........................... 50

10.2Recommended Spare Parts .......................... 51

Part I

Product Introduction

Chapter 1

Serial Number and Technical Support

1.1 The Serial Tag

1.2 Serial Tag location

To have access to the Serial Tag it is sufﬁcient to remove both tanks.

The Serial Number is an extremely important information which has to be provided

each time a Technical Support is required or is necessary to buy spare parts or

accessories. The serial number is the only way to identify the machine by model,

production date type equipments in general.

Chapter 2

Main Technical Features

Technical Data

TECHNICAL DESCRIPTION U/M XM13SC

Working Width in 11

Working Capacity, up to ft2

h9687

Brush Diameter/Revolutions φin-rpm 11-150

Brush Motor Voltage/Power V-W 36-90

Max Weight on brush lb 22

Total Power W 255

Squeegee Width in 12,8

Solution Tank gal 0,8

Recovery Tank gal 1

Vacuum Motor Voltage/Power V-W 36-150

Machine Length (Handlebar Up - Down) in 21,8-35,2

Machine Height (Handlebar Up - Down) in 41,3-13,8

Machine Width in 14,8

Sound pressure level (ISO 11201) LpA dB (A) ≤76

Hand vibration level (ISO 5349) m

s2≤2.5

Weights and Pressures1

TECHNICAL DESCRIPTION U/M XM13SC

Machine Weight (Machine + Brush + Squeegee) lb 40

Gross Weight of the machine in work conditions

(Machine + Battery+ Water + Brush + Squeegee)

lb 50

1Weight and Pressures depends on how much water there is in the tanks.

Part II

Anomalies Resolution Guide

Chapter 3

Troubleshooting Guide

3.1 Basic Guide

3.1.1 Electrical system: what to do if. . .

The machine doesn’t switch on

1. The main switch is not pushed ⇒Push the main switch.

2. The battery doesn’t work properly ⇒Refer to the proper section (see section

3.1.1 at page 8).

3. The problem is not solved ⇒Refer to the Advanced Guide (see section

3.2.2 at page 14).

The battery don’t work properly

1. The battery is not properly con-

nected

⇒Insert the battery until the end posi-

tion clicks.

2. The battery is discharged ⇒Perform a complete charge cycle.

3. The battery is faulty ⇒Refer to the Advanced Guide (see section

3.2.3 at page 15).

4. The battery charger doesn’t work ⇒Check the proper section (see section 3.1.1

at page 8).

The battery charger doesn’t work

1. The battery charger is not con-

nected to the power supply

⇒Connect the charger to a supplied

electric socket.

2. The charger has the power switch

in position 0

⇒Move the power switch in position 1.

3. The battery charger has the Red

LED blinking

⇒The battery charger is in error con-

ditions, verify the alarm tables and

solve the issue by following the re-

lated instructions (see section 5.3.5 at page

32).

4. The battery charger plugged in and

turned on does not activate the

Green LED (electrical continuity)

⇒Replace the battery charger.

5. The battery charger plugged in and

turned on with battery inserted

does not activate the Red LED

(charging)

⇒Make sure the battery is properly

positioned inside the slot and the

terminals have a good contact.

The battery may be already

charged.

The display shows an alarm message

1. The display shows an alarm mes-

sage

⇒Check what alarm message is

shown and solve the related issue

by following the proper instructions

(see section 5.6.1 at page 36).

The machine has a very limited working autonomy

1. The battery is discharged ⇒Perform a complete charge cycle.

2. The battery have been working for

several cycles

⇒Replace the battery.

3.1.2 Mechanical scrubbing system: what to do if. . .

The machine doesn’t clean well

1. The machine is switched off ⇒Switch on the machine.

2. The machine doesn’t switch on ⇒Refer to the proper section (see section

3.1.1 at page 8).

3. The display shows an alarm mes-

sage

⇒Check what alarm message is

shown and solve the related issue

by following the proper instructions

(see section 5.6.1 at page 36).

4. The switch ”Auto” is not pressed ⇒Press the ”Auto” switch.

5. The brush motor is not working ⇒Refer to the Advanced Guide (see section

3.2.5 at page 16).

6. The brush is not properly engaged ⇒Release and engage properly the

brush.

7. The solution ﬂow rate is not correct

or not enough

⇒Refer to the proper section (see section

3.1.4 at page 12).

8. The detergent doesn’t ﬁt the type of

dirt

⇒Replace the detergent with a proper

one.

Andere Handbücher für TRIDENT XM13SC

Inhaltsverzeichnis

Andere Hillyard Bodenreinigungsmaschine Handbücher

Hillyard

Hillyard TRIDENT T26 SC PLUS Bedienungsanleitung

Hillyard

Hillyard TRIDENT T26SC PLUS Bedienungsanleitung

Hillyard

Hillyard Trident EX8 Bedienungsanleitung

Hillyard

Hillyard TRIDENT EX20 Bedienungsanleitung

Hillyard

Hillyard TRIDENT EX7 Bedienungsanleitung

Hillyard

Hillyard TRIDENT EX12 Bedienungsanleitung

Hillyard

Hillyard Trident BU1500 Bedienungsanleitung

Beliebte Bodenreinigungsmaschine Handbücher anderer Marken

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Bedienungsanleitung

Numatic

Numatic ET 4045 Bedienungsanleitung

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Bedienungsanleitung

Mytee

Mytee 8070 Mytee-Lite Bedienungsanleitung

Kärcher

Kärcher B 140 R Bedienungsanleitung

Triple S

Triple S Ace 26T1 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SW 750 Bedienungsanleitung

Tornado

Tornado Marathon 2000 98190 Handbuch

Windsor

Windsor ADMIRAL Admiral 8 Bedienungsanleitung

Numatic

Numatic TTB 1117/100 Bedienungsanleitung

Tennant

Tennant 8210D Bedienungsanleitung

Nobles

Nobles Frontier Produkthandbuch

lavina

lavina 21-X Bedienungsanleitung

KENT

KENT Edge 28B Bedienungsanleitung

Tennant

Tennant 215 Produkthandbuch

Windsor

Windsor BDP 51/2000C Bedienungsanleitung

CleanFreak

CleanFreak DURA-18HD Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Administratorhandbuch