Hioki 3541 Bedienungsanleitung

RESISTANCE HiTESTER

INSTRUCTION MANUAL

3541

Contents

Introduction.................................................................................1

Inspection ...................................................................................1

Safety Information ......................................................................2

Operating Precautions................................................................4

Chapter 1

Overview ___________________________________ 9

1.1 Product Overview..........................................................9

1.2 Features ........................................................................9

1.3 Names and Functions of Parts....................................11

Chapter 2

Measurement Preparations___________________ 17

2.1 Procedure....................................................................17

2.2 Connecting the Power Cord ........................................18

2.3 Connecting the Test Leads .........................................19

2.4 Connecting the Temperature Probe............................21

2.5 Connecting an Analog Output Thermometer ..............22

2.6 Connecting the Temperature HiTester via RS-232C ..23

2.7 Turning the Power On and Off ....................................24

2.8 Selecting the Line Frequency......................................25

2.9 Selecting the Measurement Terminals........................26

Chapter 3

Measurement ______________________________ 29

3.1 Resistance Measurement ...........................................29

3.2 Temperature Measurement

(Temperature Correction & Conversion) .....................31

Chapter 4

Basic Function Settings _____________________ 37

4.1 Selecting Measurement Functions ..............................37

4.2 Measurement Range Setting ......................................38

4.3 Zero-Adjust Function...................................................40

4.4 Sampling Rate Setting ................................................42

4.5 Measurement Fault Detection Function ......................43

4.6 Overflow Display .........................................................44

Contents

Chapter 5

Applied Function Settings____________________ 45

5.1 Comparator Measurement Function........................... 45

5.2 BIN Measurement Function........................................ 51

5.3 Averaging Function..................................................... 57

5.4 Temperature Correction Function (TC) ...................... 58

5.5 Temperature Conversion Function (∆t) ...................... 60

5.6 Statistical Calculation Functions................................. 62

5.7 Offset Voltage Compensation (OVC) ......................... 65

5.8 Self-Calibration ........................................................... 66

5.9 Key Beeper Setting..................................................... 67

5.10 Key-Lock Function...................................................... 67

5.11 Trigger Function ......................................................... 68

5.11.1 Trigger Source .............................................................. 68

5.11.2 Trigger Delay ................................................................ 69

5.12 Panel Save Function .................................................. 71

5.13 Panel Load Function................................................... 72

5.14 Reset Function ........................................................... 73

5.15 Valid Functions for Each State ................................... 75

Chapter 6

External Control ____________________________77

6.1 External Control and the External Input/Output (EXT I/O)

Connector ................................................................... 77

6.2 Signal Descriptions..................................................... 78

6.3 Timing Chart ............................................................... 83

6.4 Internal Circuitry ......................................................... 85

Chapter 7

Printer (Optional) ___________________________87

7.1 About Printing ............................................................. 87

7.2 Printer Connection...................................................... 88

7.3 Interface Selection...................................................... 92

7.4 Setting of the 9670 PRINTER..................................... 92

7.5 Printing ....................................................................... 93

Contents

iii

Chapter 8

RS-232C/GP-IB Interfaces ____________________ 95

8.1 Overview and Features ...............................................95

8.2 Specifications ..............................................................96

8.2.1 RS-232C Specifications ................................................96

8.2.2 GP-IB Specifications .....................................................96

8.3 Connections and Protocol Selection ...........................97

8.3.1 Attaching the Connector ................................................97

8.3.2 Communications Protocol Selection ..............................99

8.4 Communication Methods ..........................................100

8.4.1 Message Format .........................................................100

8.4.2 Output Queue and Input Buffer ...................................105

8.4.3 Status Byte Register ...................................................106

8.4.4 Event Registers ...........................................................108

8.4.5 Initialization Items ........................................................111

8.4.6 Local Function .............................................................111

8.5 Message List .............................................................112

8.5.1 Standard Commands ..................................................112

8.5.2 Device-Specific Commands ........................................113

8.6 Message Reference ..................................................118

8.6.1 Standard Commands ..................................................119

8.6.2 Device-Specific Commands ........................................123

8.7 Basic Data Importing Methods ..................................147

8.8 Sample Programs .....................................................148

Chapter 9

Specifications_____________________________ 159

9.1 General Specifications ..............................................159

9.2 Accuracy ...................................................................164

Chapter 10

Maintenance and Service ___________________ 167

10.1 Inspection, Repair and Cleaning ...............................167

10.2 Error Display .............................................................168

Appendix_________________________________ 169

Appendix 1 Four-Terminal (Voltage-Drop) Method............169

Appendix 2 Temperature Correction Function (TC)...........170

Appendix 3 Temperature Conversion Function (∆t)...........172

Appendix 4 Effect of Thermoelectromotive Force..............173

Contents

Appendix 5 JEC 2137-Compliant Resistance Measurement

of Inductive Machines..................................... 175

Appendix 6 Test Lead Options.......................................... 176

Appendix 7 Rack Mounting ............................................... 178

Appendix 8 Dimensional Diagram..................................... 180

Index ______________________________________ i

Introduction

Thank you for purchasing the HIOKI “Model 3541 RESISTANCE

HiTESTER". To obtain maximum performance from the instrument,

please read this manual carefully, and keep it handy for future

reference.

Inspection

Confirming

package contents

When you receive the instrument, inspect it carefully to ensure that no

damage occurred during shipping. In particular, check the

accessories, panel switches, and connectors. If damage is evident, or

if it fails to operate according to the specifications, contact your dealer

or Hioki representative.

Instrument 3541 RESISTANCE HiTESTER

Accessories • 9287 CLIP TYPE LEAD .........................................1

• 9451 TEMPERATURE PROBE..............................1

• Instruction Manual..................................................1

• Power Cord (2-line + ground).................................1

• EXT I/O Male Connector ........................................1

Shipping

precautions

Use the original packing materials when transporting the instrument, if

possible.

Options

Test-Lead-Related

(Page 176)

• 9452 CLIP TYPE LEAD

• 9453 FOUR TERMINAL LEAD

• 9455 PIN TYPE LEAD (for ultra precision)

• 9461 PIN TYPE LEAD

• 9465 PIN TYPE LEAD

• 9467 LARGE CLIP TYPE LEAD

• 9454 ZERO ADJUSTMENT BOARD

• 9300 CONNECTION CABLE (Available Soon)

Interface

Cable

• 9637 RS-232C CABLE (9-pin to 9-pin/cross cable)

• 9638 RS-232C CABLE (9-pin to 25-pin/cross cable)

• 9151-02 GP-IB CONNECTOR CABLE (2 m)

• 9151-04 GP-IB CONNECTOR CABLE (4 m)

Printer-Related • 9670 PRINTER (BL-80RS II, made by SANEI ELECTRIC INC.)

• 9671 AC ADAPTER (for the 9670, BL-100W, made by SANEI

ELECTRIC INC.)

• 9672 BATTERY PACK (for the 9670)

• 9673 BATTERY CHARGER (for the 9672)

• 9237 RECORDING PAPER (80 mm x 25 m, 4 rolls, for the 9670)

• 9638 RS-232C CABLE (for 3541-9670)

Safety Information

This manual contains information and warnings essential for safe

operation of the instrument and for maintaining it in safe operating

condition. Before using it, be sure to carefully read the following safety

precautions.

Safety Symbols

The following symbols in this manual indicate the relative importance

of cautions and warnings.

Other Symbols

This instrument is designed to comply with IEC 61010 Safety

Standards, and has been thoroughly tested for safety prior to

shipment. However, mishandling during use could result in injury

or death, as well as damage to the instrument. Be certain that you

understand the instructions and precautions in the manual

before use. We disclaim any responsibility for accidents or

injuries not resulting directly from product defects.

In the manual, the symbol indicates particularly important

information that the user should read before using the

instrument.

The symbol printed on the instrument indicates that the user

should refer to a corresponding topic in the manual (marked with

the symbol) before using the relevant function.

Indicates AC (Alternating Current).

Indicates the ON side of the power switch.

Indicates the OFF side of the power switch.

Indicates that incorrect operation presents a significant

hazard that could result in serious injury or death to the

user.

Indicates that incorrect operation presents a possibility of

injury to the user or damage to the instrument.

Indicates advisory items related to performance or correct

operation of the instrument.

Indicates a prohibited action.

Indicates the location of reference information.

Indicates quick references for operation and remedies for

troubleshooting.

*Indicates that descriptive information is provided below.

Safety Information

Overvoltage Categories (CAT)

This instrument complies with CAT II (power supply section) safety

requirements.

To ensure safe operation of measurement instruments, IEC 60664

establishes safety standards for various electrical environments,

categorized as CAT I to CAT IV, and called overvoltage categories.

These are defined as follows.

Higher-numbered categories correspond to electrical environments

with greater momentary energy. So a measurement device designed

for CAT III environments can endure greater momentary energy than a

device designed for CAT II.

Using a measurement instrument in an environment designated with a

higher-numbered category than that for which the instrument is rated

could result in a severe accident, and must be carefully avoided.

Accuracy We define measurement tolerances in terms of f.s. (full scale), rdg.

(reading) and dgt. (digit) values, with the following meanings:

CAT I Secondary electrical circuits connected to an AC electrical

outlet through a transformer or similar device.

CAT II Primary electrical circuits in equipment connected to an AC

electrical outlet by a power cord (portable tools, household

appliances, etc.)

CAT III Primary electrical circuits of heavy equipment (fixed

installations) connected directly to the distribution panel, and

feeders from the distribution panel to outlets.

CAT IV The circuit from the service drop to the service entrance, and

to the power meter and primary overcurrent protection device

(distribution panel).

f.s. (maximum display value or scale length)

The maximum displayable value or scale length. This is usually the

name of the currently selected range.

rdg. (reading, displayed or indicated value)

The value currently being measured and indicated on the measuring

instrument.

dgt. (resolution)

The smallest displayable unit on a digital measuring instrument, i.e.,

the input value that causes the digital display to show a "1" as the

least-significant digit.

Operating Precautions

Follow these precautions to ensure safe operation and to obtain the

full benefits of the various functions.

• Before using the instrument the first time, verify that it operates

normally to ensure that the no damage occurred during storage or

shipping. If you find any damage, contact your dealer or Hioki

representative.

• Before using the instrument, make sure that the insulation on the

probes and cables is undamaged and that no bare conductors are

improperly exposed. Using the instrument in such conditions could

cause an electric shock, so contact your dealer or Hioki

representative for replacements.

Before Use

Handling the Instrument

• Do not allow the instrument to get wet, and do not take

measurements with wet hands. This may cause an electric

shock.

• Never modify the instrument. Only Hioki service engineers

should disassemble or repair the instrument. Failure to observe

these precautions may result in fire, electric shock, or injury.

• Do not use the instrument where it may be exposed to

corrosive or combustible gases. The instrument may be

damaged or cause an explosion.

To avoid damage to the instrument, protect it from physical shock

when transporting and handling. Be especially careful to avoid

physical shock from dropping.

Inhaltsverzeichnis

Andere Hioki Prüfgeräte Handbücher

Hioki

Hioki IR4053 Bedienungsanleitung

Hioki

Hioki FT3470-51 Bedienungsanleitung

Hioki

Hioki FT6031 Bedienungsanleitung

Hioki

Hioki 3441 Bedienungsanleitung

Hioki

Hioki BT3554 Bedienungsanleitung

Hioki

Hioki 9261 Bedienungsanleitung

Hioki

Hioki 3504-40 C HiTester Bedienungsanleitung

Hioki

Hioki 3660 Bedienungsanleitung

Hioki

Hioki 3444 Bedienungsanleitung

Hioki

Hioki 3665-20 Bedienungsanleitung

Hioki

Hioki IM9202 Bedienungsanleitung

Hioki

Hioki RM3543 Bedienungsanleitung

Hioki

Hioki 3802-50 Bedienungsanleitung

Hioki

Hioki 3550 Bedienungsanleitung

Hioki

Hioki ST5520-01 Bedienungsanleitung

Hioki

Hioki 3153 Bedienungsanleitung

Hioki

Hioki 3288-20 Bedienungsanleitung

Hioki

Hioki MR8827 Bedienungsanleitung

Hioki

Hioki SM7810 Bedienungsanleitung

Hioki

Hioki MEMORY HiCORDER 8855 Bedienungsanleitung

Hioki

Hioki CLAMP ON LEAK HiTESTER 3283 Bedienungsanleitung

Hioki

Hioki L2020 Bedienungsanleitung

Hioki

Hioki 3403 Bedienungsanleitung

Hioki

Hioki 3030-10 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung