Hioki IM9201 Bedienungsanleitung

Instruction Manual

IM9201

SMD TEST FIXTURE

July 2016 Edition 1

IM9201A961-00 16-07H

Introduction

Thank you for purchasing the Hioki IM9021 SMD Test Fixture. To obtain maximum performance

from the device, please read this manual rst, and keep it handy for future reference.

This device is used by connecting to the impedance analyzer. Before using the impedance

analyzer, read the instruction manual of the impedance analyzer carefully.

Contents

Verifying Package Contents p.2

Safety Information p.3

Operating Precautions p.4

Product Overview p.5

Names and Functions of Parts p.6

Measuring Method p.7

■Measurement Procedure p.7

■Inspection Before Use p.8

■Attaching the Test Head and the Adapter p.9

■Calibration p.10

■Attaching the Device p.13

■Electrical Length Correction p.14

■Short Correction p.15

■Open Correction p.18

■Starting the Measurement p.20

Specications p.21

Maintenance and Service p.22

IM9201A961-00

Appx. Index

Verifying Package Contents

When you receive the device, inspect it carefully to ensure that no damage occurred during

shipping. In particular, check the accessories. If damage is evident, or if it fails to operate according

to the specications, contact your authorized Hioki distributor or reseller.

Conrm that the following items are provided.

(1)

(3) (4)

(5) (11)(2)

(9)(8)(10)(7)

(6)

Model IM9201 SMD Test Fixture × 1..............................................................................(1)

Short plate × 5................................................................................................................

GND plate × 1

Device guide × 1

(2)

Hexagon socket head bolts (spare, M1.4 × 4 mm) × 4...................................................

Knob (for xing tip pin) × 1

Tip pin × 2

(3)

Brush for cleaning × 1 ....................................................................................................(4)

Hex driver × 1.................................................................................................................(5)

Carrying case × 1...........................................................................................................(6)

Instruction Manual × 1

GND plate and device guide for the sizes 1005 (0402), 1608 (0603), 2012 (0805), 3216 (1206), 3225 (1210)

are installed in the device. Refer to "Tip pins, device guides, and plates for each DUT size" (p.5).

Options (sold separately)

Model IM9906 Adapter (3.5 mm/7 mm)..........................................................................(7)

Model IM9905 Calibration Kit (LOAD)............................................................................(8)

Model IM9905 Calibration Kit (OPEN)............................................................................(9)

Model IM9905 Calibration Kit (SHORT) .........................................................................(10)

Magnifying glass (Model IM9200 Test Fixture Stand accessory) ...................................(11)

Model IM9200 Test Fixture Stand

Options (sold separately) can be stored inside (7) to (11) of the carrying case. Please store them after

removing the packed sponge at the time of unpacking.

Safety Information

Before using the device, be certain to carefully read the following safety notes.

CAUTION

•Mishandling during use could result in damage to the device. Be certain that you

understand the instructions and precautions in the manual before use.

• Individuals using an electrical measuring device for the rst time should be supervised

by a technician who has experience in electrical measurement.

Notation

In this document, the risk seriousness and the hazard levels are classied as follows.

WARNING Indicates a potentially hazardous situation that may result in death

or serious injury to the operator.

CAUTION Indicates a potentially hazardous situation that may result in minor

or moderate injury to the operator or damage to the device or

malfunction of the device.

IMPORTANT Indicates information related to the operation of the device or

maintenance tasks with which the operators must be fully familiar.

Indicates prohibited action.

Indicates the action which must be performed.

Symbols for standards

Indicates the Waste Electrical and Electronic Equipment Directive (WEEE Directive)

in EU member states.

Indicates that the product conforms to regulations set out by the EC Directive.

Appx. Index

Operating Precautions

Follow these precautions to ensure safe operation and to obtain the full benets of the various

functions.

Installation Environment

WARNING

Installing the device in inappropriate locations may cause malfunctions or may

give rise to accidents. Avoid the following locations:

•Exposed to direct sunlight or high temperature

•Exposed to corrosive or combustible gases

•Exposed to strong electromagnetic elds or electrostatic charges

•Near induction heating systems (such as high-frequency induction heating

systems and IH cooking equipment)

•Susceptible to mechanical vibration

•Exposed to water, oil, chemicals, or solvents

•Exposed to high humidity and condensation

•Exposed to high quantities of dust particles

Handling the Device

CAUTION

• Do not press the tip pin in the electrode when the DUT is not attached.

• While pressing the tip pin into the DUT, the DUT may pop out. To avoid injuries, lower

the pusher slowly and press the tip pin into the DUT.

• To avoid damage to the device, protect it from physical shock when transporting and

handling. Be especially careful to avoid physical shock from dropping.

•To prevent damage to the device, use the bolts included in the factory shipment for

securing the pusher and plate. If you have lost any bolts or nd any damaged bolts,

please contact your authorized Hioki distributor or reseller for a replacement.

Measurements

CAUTION

•Do not input a voltage in excess of the maximum applied voltage listed in the

specications. It may cause damage to the device or connecting equipments.

•To avoid damage, do not connect the charged capacitor to the device.

Precautions during shipment

During shipment of the device, handle it carefully so that it is not damaged due to a vibration or

shock.

Product Overview

This device is the test xture for SMD (Surface Mount Device) to be used by connecting to the

impedance analyzer of Hioki. It measures the 2 terminals of SMD.

Measurable DUT size

Nominal size [mm]

JIS (EIA) Dimensions

L × W [mm] H [mm]

0603 (0201) (0.6±0.03) × (0.3±0.03) H ≥ 0.25

1005 (0402) (1.0±0.1) × (0.5±0.1) H ≥ 0.4

1608 (0603) (1.6±0.15) × (0.8±0.15) H ≥ 0.4

2012 (0805) (2.0±0.15) × (1.2±0.15) H ≥ 0.4

3216 (1206) (3.2±0.15) × (1.6±0.15) H ≥ 0.4

3225 (1210) (3.2±0.15) × (2.5±0.15) H ≥ 0.4

Tip pins, device guides, and plates for each DUT size

DUT size

JIS (EIA)

Accessories

0603 (0201) 1005 (0402) 1608 (0603) 2012 (0805) 3216 (1206)

3225 (1210)

Tip pin

0603

3225

3216

1005 1608

2012

0603

3225

3216

1005 1608

2012

(Common)

Device guide

0603

3225

3216

1005 1608

2012

0603

3225

3216

1005 1608

2012

(Common)

Short plate

(At the time of

short correction)

0603

3225

3216

1005 1608

2012

0603

3225

3216

1005 1608

2012

0603

3225

3216

1005 1608

2012

0603

3225

3216

1005 1608

2012

0603

3225

3216

1005 1608

2012

GND plate

(At the time of open

correction and

measurement)

0603

3225

3216

1005 1608

2012

0603

3225

3216

1005 1608

2012

(Common)

Appx. Index

Names and Functions of Parts

(2)

(1)

(3)

(4)

(5)

(6)

(12)

(9)

(11)

(7)

(8)

(13)

(10)

(1) Pusher Presses and xes the DUT.

(2) Tip pin The tip of the pusher. Replaced according to the DUT to be measured.

(3) Shock absorber Absorbs the shock when the pusher comes down.

(4) Device guide Placed on the top of the GND plate or short plate for use.

(5) Short plate or

GND plate Short plate is used at the time of short correction.

GND plate is used at the time of open correction and measurement.

(6) Electrode section The measurement unit of the device. Measures by placing the GND plate

and DUT on top of the electrode.

(7) Model IM9906 Adapter

(3.5 mm/7 mm) The exclusive adapter for connecting the device to the test head of the

impedance analyzer side.

(8) Test head The test head is provided with the impedance analyzer.

(9) Loupe The magnifying glass provided with the model IM9200 Test Fixture Stand

(option). It is used by installing to the model IM9200.

(10) Knob The knob is loosened to move the tip pin to the DUT location. Then the

knob is tightened to x it.

(11) Stand xing knob The knob xes the device to the model IM9200 Test Fixture Stand.

(12) Stopper Locks the pusher so that it does not come down.

(13) Model IM9200 Test

Fixture Stand The exclusive stand for xing the test head of the impedance analyzer and

the device.

Measuring Method

Measurement Procedure

You will need (besides the device and accessories):

•Model IM7580 series Impedance Analyzer × 1

•Model IM9200 Test Fixture Stand × 1

•Model IM9906 Adapter × 1

• 3.5 mm Connector torque wrench × 1 (This is not provided with the device.)

• Tweezers × 1 (This is not provided with the device. Tweezers which are thinner than the DUT

size, clean, and not magnetized are recommended.)

Connect the test head to the

impedance analyzer. Connect the cable of the test head to the impedance analyzer.

See the instruction manual

of the impedance analyzer. Test head

Attach the test head and adapter

to the stand. Attach the test head and model IM9906 Adapter to the model

IM9200 Test Fixture Stand.

Model IM9200

Model IM9906

(p.9)

Execute the calibration. Execute the open calibration, short calibration, and load

calibration.

(p.10)

Attach the device. Attach the device to the model IM9200 Test Fixture Stand.

Device (model IM9201)

(p.13)

Execute the correction. Execute the electrical length correction, short correction, and

open correction.

(From p.14)

Start the measurement. Connect the DUT to the measurement location of the device

guide and start the measurement by the impedance analyzer.

(p.20)

Appx. Index

Measuring Method

Inspection Before Use

Before using the device, verify that it operates normally to ensure that no damage occurred during

storage or shipping. If you nd any damage, contact your authorized Hioki distributor or reseller.

Inspection item Solution

Is the short plate worn? Compare the resistance value with the new or a non-defective short

plate. Replace with new short plate if the resistance value is high.

Is the tip pin deformed? If the tip pin is deformed, contact your authorized Hioki distributor or

reseller.

Is the device damaged? If the device is damaged, send it for repair.

Is the GND plate damaged or

worn? If there are signicant scratches and deformation, replace it with the

new GND plate.

Inhaltsverzeichnis

Andere Hioki Prüfgeräte Handbücher

Hioki

Hioki 3554 Bedienungsanleitung

Hioki

Hioki 3169-20 Gebrauchsanweisung

Hioki

Hioki 3444 Bedienungsanleitung

Hioki

Hioki SS7012 Bedienungsanleitung

Hioki

Hioki 3285 Bedienungsanleitung

Hioki

Hioki FT6031 Bedienungsanleitung

Hioki

Hioki 3145 Bedienungsanleitung

Hioki

Hioki 3291-50 Bedienungsanleitung

Hioki

Hioki 3245-60 Bedienungsanleitung

Hioki

Hioki RM3542 Bedienungsanleitung

Hioki

Hioki 3803 Bedienungsanleitung

Hioki

Hioki RM3543 Bedienungsanleitung

Hioki

Hioki IR4051 Bedienungsanleitung

Hioki

Hioki CLAMP ON LEAK HiTESTER 3283 Bedienungsanleitung

Hioki

Hioki IR4059 Bedienungsanleitung

Hioki

Hioki 3244-60 Bedienungsanleitung

Hioki

Hioki 3665-20 Bedienungsanleitung

Hioki

Hioki 3174 Bedienungsanleitung

Hioki

Hioki ST5680 Benutzerhandbuch

Hioki

Hioki 3561 Bedienungsanleitung

Hioki

Hioki BT3554-50 Bedienungsanleitung

Hioki

Hioki 3237 Bedienungsanleitung

Hioki

Hioki 3665-20 Bedienungsanleitung

Hioki

Hioki 3441 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung