Hirschmann RS20 series Bedienungsanleitung
RM Web L2E
Release
5.0
04/09
Technical Support
Reference Manual
Web-based Interface
Industrial ETHERNET (Gigabit) Switch
RS20/RS30/RS40, MS20/MS30, OCTOPUS
The naming of copyrighted trademarks in this manual, even when not specially indicated, should
not be taken to mean that these names may be considered as free in the sense of the trademark
and tradename protection law and hence that they may be freely used by anyone.
© 2009 Hirschmann Automation and Control GmbH
Manuals and software are protected by copyright. All rights reserved. The copying, reproduction,
translation, conversion into any electronic medium or machine scannable form is not permitted,
either in whole or in part. An exception is the preparation of a backup copy of the software for
your own use. For devices with embedded software, the end-user license agreement on the en-
closed CD applies.
The performance features described here are binding only if they have been expressly guaran-
teed in the contract. This publication has been created by Hirschmann Automation and Control
GmbH according to the best of our knowledge. Hirschmann reserves the right to change the con-
tents of this manual without prior notice. Hirschmann gives no guarantee in respect of the cor-
rectness or accuracy of the details in this publication.
Hirschmann accepts no responsibility for any damages, resulting from the use of the network
components or the associated operating software. In addition, we refer to the conditions of use
specified in the license contract.
You can find the current version of this manual on the Internet, on the Hirschmann product pages
(www.hirschmann-ac.de).
Printed in Germany
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Tel.: +49 1805 141538
Rel. 5.0-01-0708 – 29.4.09
Content
RM Web L2E
Release
5.0
04/09 3
Content
Content 3
About this Manual 7
Key 9
Opening the Web-based Interface 11
1 Basic Settings 15
1.1 System 16
1.2 Network 21
1.3 Software 23
1.3.1 View the software versions present on the device 23
1.3.2 Update via file selection 24
1.3.3 tftp update 24
1.4 Port configuration 25
1.5 Power over ETHERNET 27
1.6 Load/Save 29
1.6.1 Loading the configuration 30
1.6.2 Saving the configuration 30
1.6.3 URL 31
1.6.4 Deleting a configuration 31
1.6.5 Using the AutoConfiguration Adapter (ACA) 32
1.6.6 Canceling a configuration change 33
1.7 Restart 35
2 Security 37
2.1 Password / SNMP Access 38
2.2 SNMPv1/v2 Access Settings 40
2.3 Telnet/Web Access 43
2.3.1 Description of Telnet access 43
2.3.2 Description of Web access 44
2.4 Port Security 45
Content
4RM Web L2E
Release
5.0
04/09
3Time 49
3.1 SNTP configuration 51
3.2 PTP (IEEE 1588) 54
3.2.1 PTP Global (MS20/MS30, PowerMICE) 55
3.2.2 PTP Version 1 (MS20/MS30, Power MICE) 57
3.2.3 PTP Version 2 (BC) (MS20/MS30, PowerMICE) 60
3.2.4 PTP Version 2 (TC) (MS20/MS30, PowerMICE) 65
4 Switching 69
4.1 Switching Global 70
4.2 Filters for MAC addresses 71
4.3 Rate Limiter 73
4.3.1 Rate Limiter settings 73
4.4 Multicasts 75
4.4.1 Global Configuration 75
4.4.2 IGMP Querier and IGMP settings 76
4.4.3 Unknown Multicasts 78
4.4.4 Known Multicasts 79
4.4.5 Settings per port (table) 80
4.5 VLAN 83
4.5.1 VLAN Global 83
4.5.2 Current VLAN 86
4.5.3 VLAN Static 88
4.5.4 VLAN Port 90
5 QoS/Priority 93
5.1 Global 94
5.2 Port configuration 97
5.2.1 Entering the port priority 98
5.3 802.1D/p Mapping 99
5.4 IP DSCP mapping 101
Content
RM Web L2E
Release
5.0
04/09 5
6 Redundancy 103
6.1 Ring Redundancy 104
6.1.1 Configuring the HIPER-Ring 106
6.1.2 Configuring the MRP-Ring 109
6.2 Ring/Network coupling 112
6.2.1 Preparing a Ring/Network coupling 112
6.3 Rapid Spanning Tree 119
6.3.1 Rapid Spanning Tree Global 121
6.3.2 Rapid Spanning Tree Port 125
7 Diagnosis 129
7.1 Event log 130
7.2 Ports 131
7.2.1 Statistics table 131
7.2.2 Utilization 132
7.2.3 SFP modules 133
7.3 Topology Discovery 134
7.4 Port Mirroring 136
7.5 Device Status 138
7.6 Signal contact 140
7.6.1 Manual setting 140
7.6.2 Function monitoring 140
7.6.3 Device status 142
7.6.4 Configuring traps 142
7.7 Alarms (Traps) 143
7.8 Report 145
7.9 IP address conflict detection 146
7.10 Self Test 148
7.11 Service mode 149
7.11.1Activating the service mode 149
7.11.2Deactivating the service mode 151
Content
6RM Web L2E
Release
5.0
04/09
8 Advanced 153
8.1 DHCP Relay Agent 154
8.2 Industrial Protocols 156
8.2.1 PROFINET IO 157
8.2.2 EtherNet/IP 157
8.3 Command Line 158
A Appendix 159
A.1 Technical Data 160
A.2 List of RFCs 161
A.3 Based specifications and standards 163
A.4 Copyright of integrated software 164
A.4.1 Bouncy Castle Crypto APIs (Java) 164
A.4.2 LVL7 Systems, Inc. 165
B Readers’ comments 167
C Index 169
D Further support 171
About this Manual
RM Web L3P+
Release
5.0
04/09 7
About this Manual
The "Web-based Interface" reference manual contains detailed information
on using the Web interface to operate the individual functions of the device.
The "Command Line Interface" reference manual contains detailed informa-
tion on using the Command Line Interface to operate the individual functions
of the device.
The “Installation” user manual contains a device description, safety instruc-
tions, a description of the display, and all the other information that you need
to install the device before you begin with the configuration of the device.
The “Basic Configuration” user manual contains all the information you need
to start operating the device. It takes you step by step from the first startup
operation through to the basic settings for operation in your environment.
The “Redundancy Configuration” user manual contains all the information
you need to select a suitable redundancy procedure and configure it.
The “Industry Protocols” user manual describes how the device is connected
by means of a communication protocol commonly used in the industry, such
as EtherNet/IP and PROFINET.
The Network Management Software HiVision/Industrial HiVision provides
you with additional options for smooth configuration and monitoring:
XConfiguration of multiple devices simultaneously.
XGraphical interface with network layouts.
XAuto-topology discovery.
XEvent log.
XEvent handling.
XClient / Server structure.
XBrowser interface
XActiveX control for SCADA integration
XSNMP/OPC gateway
About this Manual
8RM Web L3P+
Release
5.0
04/09
Key
RM Web L3P+
Release
5.0
04/09 9
Key
The designations used in this manual have the following meanings:
Symbols used:
XList
Work step
Subheading
Link Indicates a cross-reference with a stored link
Note: A note emphasizes an important fact or draws your
attention to a dependency.
Courier ASCII representation in user interface
Router with firewall
Switch with firewall
Router
Switch
Bridge
Hub
Key
10 RM Web L3P+
Release
5.0
04/09
A random computer
Configuration Computer
Server
PLC -
Programmable logic
controller
I/O -
Robot
Andere Handbücher für RS20 series
20
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Hirschmann Schalten Handbücher
Hirschmann
Hirschmann OCTOPUS 8TX-EEC Bedienungsanleitung
Hirschmann
Hirschmann RS20 series Bedienungsanleitung
Hirschmann
Hirschmann OS20-001000T5T5TAFUHB Bedienungsanleitung
Hirschmann
Hirschmann RS2-5TX/FX Handbuch
Hirschmann
Hirschmann BATOne Bedienungsanleitung
Hirschmann
Hirschmann SPIDER 5TX Handbuch
Hirschmann
Hirschmann PowerMICE MS4128 Bedienungsanleitung
Hirschmann
Hirschmann GREYHOUND GRS1020 Bedienungsanleitung
Hirschmann
Hirschmann SPIDER 8TX-PRO Bedienungsanleitung
Hirschmann
Hirschmann GREYHOUND GMM42 Bedienungsanleitung
Hirschmann
Hirschmann Power MICE Bedienungsanleitung
Hirschmann
Hirschmann ETHERNET IP67 Bedienungs- und Montageanleitung
Hirschmann
Hirschmann GREYHOUND GRS1020 Bedienungsanleitung
Hirschmann
Hirschmann RH1-TP Handbuch
Hirschmann
Hirschmann RS20 series Bedienungsanleitung
Hirschmann
Hirschmann CS30 Bedienungsanleitung
Hirschmann
Hirschmann MACH 3001 Handbuch
Hirschmann
Hirschmann RS20 series Bedienungsanleitung
Hirschmann
Hirschmann RS20 series Bedienungsanleitung
Hirschmann
Hirschmann PAT TRS 05 / PATB3 Benutzerhandbuch
