Hirschmann RS20 series Bedienungsanleitung

RM Web L2B

Release

4.2

07/08

Technical Support

[email protected]

Reference Manual

Web-based Interface

Industrial ETHERNET Switch

RS20

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the en-

closed CD applies.

The performance features described here are binding only if they have been expressly guaran-

teed in the contract. This publication has been created by Hirschmann Automation and Control

GmbH according to the best of our knowledge. Hirschmann reserves the right to change the con-

tents of this manual without prior notice. Hirschmann can give no guarantee in respect of the

correctness or accuracy of the details in this publication.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

Printed in Germany

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

Rel. 4.2-01-0708 – 29.7.08

Content

RM Web L2B

Release

4.2

07/08 3

Content

Content 3

About this Manual 7

Key 9

1 Opening the Web-based Interface 11

2 Basic Settings 15

2.1 System 16

2.2 Network 20

2.3 Software 22

2.3.1 Update via file selection 22

2.3.2 tftp update 23

2.4 Port Configuration 24

2.5 Load/Save 26

2.5.1 Loading the configuration 27

2.5.2 Saving the configuration 27

2.5.3 URL 28

2.5.4 Deleting a configuration 28

2.5.5 Using the AutoConfiguration Adapter (ACA) 29

2.6 Restart 31

3 Security 33

3.1 Password / SNMP 34

3.2 SNMPv1/v2 Access Setting 36

3.3 Web Access 39

3.3.1 Description of Web access 39

4Time 41

4.1 SNTP configuration 43

4.2 PTP configuration 46

4.2.1 PTP Global (MS20/MS30, Power MICE) 46

Content

4RM Web L2B

Release

4.2

07/08

5 Switching 49

5.1 Switching Global 50

5.2 Filters for MAC addresses 51

5.3 Multicasts 53

5.3.1 Global settings 54

5.3.2 Unknown Multicasts 55

5.3.3 Known Multicasts 55

5.3.4 Settings per port (table) 56

6 QoS/Priority 59

6.1 Global 60

6.2 Port configuration 62

6.2.1 Entering the port priority 63

6.3 802.1D/p Mapping 64

6.4 IP DSCP mapping 66

7 Redundancy 69

7.1 HIPER-Ring 70

7.1.1 Configuring HIPER-Ring Version 1 71

7.1.2 Configuring HIPER-Ring Version 2 (MRP Draft) 74

8 Diagnostics 77

8.1 Event log 78

8.2 Ports 79

8.2.1 Statistics table 79

8.2.2 Utilization 80

8.2.3 SFP modules 81

8.3 Topology Discovery 83

8.4 Port Mirroring 85

8.5 Device Status 87

8.6 Signal contact 89

8.6.1 Manual setting 89

8.6.2 Function monitoring 89

8.6.3 Device status 91

Content

RM Web L2B

Release

4.2

07/08 5

8.6.4 Configuring traps 91

8.7 Alarms (Traps) 92

8.8 Report 94

8.9 Self-test 95

9 Advanced 97

9.1 DHCP Relay Agent 98

A Technical Data 101

B Reader´s comments 103

C Index 105

D Further support 107

Content

6RM Web L2B

Release

4.2

07/08

About this Manual

RM Web L2B

Release

4.2

07/08 7

About this Manual

The "Web-based Interface" reference manual contains detailed information

on using the Web interface to operate the individual functions of the device.

The "Command Line Interface" reference manual contains detailed informa-

tion on using the Command Line Interface to operate the individual functions

of the device.

The “Installation” user manual contains a device description, safety instruc-

tions, a description of the display, and all the other information that you need

to install the device before you begin with the configuration of the device.

The “Basic Configuration” user manual contains all the information you need

to start operating the device. It takes you step by step from the first startup

operation through to the basic settings for operation in your environment.

The “Redundancy Configuration” user manual contains all the information

you need to select a suitable redundancy procedure and configure it.

The Network Management Software HiVision provides you with additional

options for smooth configuration and monitoring:

XEvent logbook.

XConfiguration of „System Location“ and „System Name“.

XConfiguration of the network address range and SNMP parameters.

XSaving the configuration on the device.

XSimultaneous configuration of multiple devices.

XConfiguration of the port display color red for a connection error.

About this Manual

8RM Web L2B

Release

4.2

07/08

Key

RM Web L2B

Release

4.2

07/08 9

Key

The designations used in this manual have the following meanings:

Symbols used:

XList

Work step

Subheading

Link Indicates a cross-reference with a stored link

Note: A note emphasizes an important fact or draws your

attention to a dependency.

Courier ASCII representation in user interface

Router with firewall

Switch with firewall

Router

Switch

Bridge

Hub

Key

10 RM Web L2B

Release

4.2

07/08

A random computer

Configuration Computer

Server

PLC -

Programmable logic

controller

I/O -

Robot

Andere Handbücher für RS20 series

Inhaltsverzeichnis

Andere Hirschmann Schalten Handbücher

Hirschmann

Hirschmann RSPL 20 Bedienungsanleitung

Hirschmann

Hirschmann Dragon PTN Bedienungsanleitung

Hirschmann

Hirschmann PowerMICE Bedienungsanleitung

Hirschmann

Hirschmann BATOne Bedienungsanleitung

Hirschmann

Hirschmann MSP30 Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann SPIDER PL Bedienungsanleitung

Hirschmann

Hirschmann BXS Bedienungsanleitung

Hirschmann

Hirschmann MACH4000 Series Bedienungsanleitung

Hirschmann

Hirschmann PowerMICE MS4128 Bedienungsanleitung

Hirschmann

Hirschmann BRS20-0400 Series Bedienungsanleitung

Hirschmann

Hirschmann PowerLION-24TP Bedienungsanleitung

Hirschmann

Hirschmann OCTOPUS 8M-8PoE Bedienungsanleitung

Hirschmann

Hirschmann RS2-4R Handbuch

Hirschmann

Hirschmann GigaLION-24TP Bedienungsanleitung

Hirschmann

Hirschmann CS30 Bedienungsanleitung

Hirschmann

Hirschmann RS2-5TX/FX Handbuch

Hirschmann

Hirschmann PAT TRS 05 / PATB3 Benutzerhandbuch

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann GREYHOUND GRS1020 Bedienungsanleitung

Hirschmann

Hirschmann OCTOPUS 8M Series Bedienungsanleitung

Hirschmann

Hirschmann OS20-001000T5T5TAFUHB Bedienungsanleitung

Hirschmann

Hirschmann GECKO 4TX Bedienungsanleitung

Hirschmann

Hirschmann RSPM20-4Z64Z6 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung