Hirschmann RS20 series Bedienungsanleitung

Redundanz L2B

Release

5.0

04/09

Technische Unterstützung

[email protected]

User Manual

Redundancy Configuration

Industrial ETHERNET Switch

RS20

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the en-

closed CD applies.

The performance features described here are binding only if they have been expressly guaran-

teed in the contract. This publication has been created by Hirschmann Automation and Control

GmbH according to the best of our knowledge. Hirschmann reserves the right to change the con-

tents of this manual without prior notice. Hirschmann can give no guarantee in respect of the

correctness or accuracy of the details in this publication.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

Printed in Germany

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

Rel. 5.0-01-0409 – 23.4.09

Content

Redundanz L3P+

Release

5.0

04/09 3

Content

Content 3

About this Manual 5

Key 6

1 Introduction 9

1.1 Overview of Redundancy Procedure 10

2 Ring Redundancy 11

2.1 Example of HIPER-Ring 13

2.1.1 Setting up and configuring the HIPER-Ring 15

2.2 Example of MRP-Ring 17

A Readers’ comments 21

B Index 23

C Further support 25

Content

4Redundanz L3P+

Release

5.0

04/09

About this Manual

Redundanz L2B

Release

5.0

04/09 5

About this Manual

The “Redundancy Configuration” user manual contains all the information

you need to select a suitable redundancy procedure and configure it.

The “Basic Configuration” user manual contains all the information you need

to start operating the device. It takes you step by step from the first startup

operation through to the basic settings for operation in your environment.

The “Installation” user manual contains a device description, safety instruc-

tions, a description of the display, and all the other information that you need

to install the device before you begin with the configuration of the device.

The "Web-based Interface" reference manual contains detailed information

on using the Web interface to operate the individual functions of the device.

The "Command Line Interface" reference manual contains detailed informa-

tion on using the Command Line Interface to operate the individual functions

of the device.

The Network Management Software HiVision/Industrial HiVision provides

you with additional options for smooth configuration and monitoring:

XConfiguration of multiple devices simultaneously.

XGraphical interface with network layouts.

XAuto-topology discovery.

XEvent log.

XEvent handling.

XClient / Server structure.

XBrowser interface

XActiveX control for SCADA integration

XSNMP/OPC gateway

Key

6Redundanz L2B

Release

5.0

04/09

Key

The designations used in this manual have the following meanings:

Symbols used:

XList

Work step

Subheading

Link Indicates a cross-reference with a stored link

Note: A note emphasizes an important fact or draws your

attention to a dependency.

Courier ASCII representation in user interface

Execution in the Web-based Interface user interface

Execution in the Command Line Interface user interface

Router with firewall

Switch with firewall

Router

Switch

Bridge

Hub

Key

Redundanz L2B

Release

5.0

04/09 7

A random computer

Configuration Computer

Server

PLC -

Programmable logic

controller

I/O -

Robot

Key

8Redundanz L2B

Release

5.0

04/09

Introduction

Redundanz L2B

Release

5.0

04/09 9

1 Introduction

The device contains a range of redundancy functions:

XHIPER-Ring

XMRP-Ring

Introduction

1.1

Overview of Redundancy Procedure

Redundanz L2B

Release

5.0

04/09

1.1 Overview of

Redundancy Procedure

Redundancy

procedure

Network topology Switching time

HIPER-Ring Ring typically 80 ms, up to < 500 ms - practically indepen-

dently of the number of devices

MRP-Ring Ring typically 80 ms, up to < 500 ms - practically indepen-

dently of the number of devices

Table 1: Comparison of the redundancy procedures

Andere Handbücher für RS20 series

Inhaltsverzeichnis

Andere Hirschmann Schalten Handbücher

Hirschmann

Hirschmann OCTOPUS OS20 Bedienungsanleitung

Hirschmann

Hirschmann Power MICE Bedienungsanleitung

Hirschmann

Hirschmann PowerMICE MS4128 Bedienungsanleitung

Hirschmann

Hirschmann BRS20-0400 Series Bedienungsanleitung

Hirschmann

Hirschmann MACH1040 Bedienungsanleitung

Hirschmann

Hirschmann RSPE 30 Bedienungsanleitung

Hirschmann

Hirschmann MACH102 Series Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann LION-GIGA-1SX Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann RS1 Series Handbuch

Hirschmann

Hirschmann RSP 20 Bedienungsanleitung

Hirschmann

Hirschmann GREYHOUND GMM42 Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann GREYHOUND GRS1020 Bedienungsanleitung

Hirschmann

Hirschmann SPIDER 5TX Handbuch

Hirschmann

Hirschmann RS2-5TX/FX Handbuch

Hirschmann

Hirschmann MACH4000 Series Bedienungsanleitung

Hirschmann

Hirschmann GECKO 4TX Bedienungsanleitung

Hirschmann

Hirschmann BATOne Bedienungsanleitung

Hirschmann

Hirschmann MSP30 Bedienungsanleitung

Hirschmann

Hirschmann BXS Bedienungsanleitung

Hirschmann

Hirschmann SPIDER 5TX Handbuch

Hirschmann

Hirschmann RS2-4R Handbuch

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung