Hisense PureFlat RB22A2FSE Montageanleitung
English
For questions about features, operation/performance, parts or service,
call: 1-877-465-3566
USER’S OPERATION MANUAL
Before operating this unit, please read this manual
thoroughly, and retain for future reference
RB22A2FSE
.................................................................................................... 24
..................................................................................................................... 22
............................................................................................................. 20
............................................................................................................... 19
.......................................................................................................................13
...............................................................................................12
................................................................................................ 5
...... 3
..................................................................................................................... 2
Table of Contents
Brief introduction
Important safety instructions
Installing your new appliance
Description of the appliance
Display controls
Using Your New Appliance
Cleaning and care
Helpful hints and tips
Troubleshooting
Disposal of the appliance
............................................................................................
2
Brief Introduction
Please ensure that everyone using this
appliance is familiar with its operation
and safety features. It is important that
you install the appliance correctly and
pay careful attention to the safety
instructions.
We recommend that you keep this user’s
manual with the appliance for future
reference.
This appliance is intended to be used
in households and similar applications
such as:
Thank you for your choosing Hisense. We
are sure you will find your new refrigerator
a pleasure to use. Before you use the
appliance, we recommend that you
carefully read through these instructions,
which provide details about installing and
using the product.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have supervision or been given
instruction concerning use of the appliance.
Children should be supervised to ensure
that they do not play with the appliance.
Do not store explosive substances such as
aerosol cans with a flammable propellant
in this appliance.
Kitchen areas in shops, offices and other
working environments.
Hotels, motels and other residential
environments.
Bed and breakfast environments.
Catering and similar non-commericial
applications.
WARNING
Do not use mechanical devices or other
means to accelerate the defrosting
process, other than those
recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside
the food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.
When disposing of the appliance do so
only at an authorized waste disposal
center. Do not expose to flame.
If the power cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard.
Keep Ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obsturction.
...................................................................................................17
General safety and daily use
It is important to use your appliance safely.
We recommend that you follow the
guidelines below.
Store any food in accordance with the
storage instructions from the manufacturer.
Important Safety Instructions
Safety for children and other
persons
Don’ t try to repair the appliance yourself.
It is dangerous to alter the
specifications or modify this product in
any way. Any damage to the power
cord may cause a short circuit, fire or
electric shock.
Don’ t place too much food directly
against the air outlet on the rear wall
of both the refrigerator and freezer
compartment, as it may affect
important air circulation.
Don’ t place hot items near the plastic
components of this appliance.
Frozen food must not be refrozen once it
has been thawed out.
Don’ t store bottled or canned drinks
(especially carbonated drinks) in the
freezer compartment. Bottles and cans
may explode.
Use caution consuming popsicles or ice
cubes straight from the freezer as this can
cause freezer burn to the mouth and lips.
Keep all packaging away from children
to avoid risk of suffocation.
Protect children from being scalded by
touching the compressor at the rear
bottom of appliance
Don’ t place items on top of the
appliance as this could cause injury
should they fall off.
Never allow children to play with the
appliance by hanging or standing over
or on the doors, racks, shelves and
drawers etc.
Electrical Safety
To avoid the risks that are always present
when using an electric appliance, we
recommend that you pay attention to
the instructions about electricity belo
w.
Unpack and check through the
appliance. Should any damage be
evident, don’ t plug in the appliance but
contact the shop immediately from
which you purchased it. Keep all
packing materials in this case.
We recommend that you wait for 4 hours
before connecting the appliance to
allow the refrigerant to flow back into
the compressor.
The appliance must be applied with
single phase alternating current of
110~115V/60Hz. If the voltage fluctuates
exceeding the upper limit, A.C.
automatic voltage regulator of more
than 350W should be applied to the
refrigerator for safety use.
The power plug must be accessible
when the appliance is installed.
This appliance must be grounded.
This appliance is fitted with a plug,
in accordance with local standard.
The plug should be suitable for use in all
houses fitted with sockets in accordance
with current specifications.
Electrical Safety
To avoid the risks that are always present
when using an electric appliance, we
recommend that you pay attention to
the instructions about electricity below.
3
DANGER:
If the fitted plug is not suitable for your
socket outlets, it should be cut off and
carefully disposed of. To avoid a
possible shock hazard, do not insert the
discarded plug into a socket. If in doubt
contact a qualified, registered
electrician.
Do not use extension cords or multiple
sockets which could cause overloading
of wiring circuits and could cause a fire.
Always plug your appliance into its own
individual electrical socket which has
a voltage rating that matched the
rating plate.
Make sure that the plug is not squashed
or damaged. Otherwise, it may cause
short circuit, electric shock or overheat
and even cause a fire.
Do not insert the power plug if the
socket is loose, there is a risk of electric
shock or fire.
Switch off the appliance and
disconnect it from the main power
before you clean or move it.
Never unplug the appliance by pulling
on the electrical cord. Always grip the
plug firmly and pull straight out from the
socket to prevent damaging the power
cord.
Do not operate the appliance without
the cover of interior lighting.
Any electrical component must be
replaced or repaired by a qualified
electrician or authorized service
engineer. Only genuine replacement
parts should be used.
Do not use electrical appliances such
as ice cream makers inside the food
storage compartments of the
appliance unless they are approved
by the manufacturer.
To avoid eye injury, do not look directly
into the LED light located in the refrigerator
compartment. If it is not functioning
correctly, consult a qualified, registered
electrician or replace it in accordance
with the “Cleaning and Care” chapter.
The refrigerant isobutane (R600a) is
contained within the refrigerant circuit of
the appliance. During transportation and
installation of the appliance, ensure that
none of the components of the refrigerant
circuit become damaged.
The refrigerant (R600a) is flammable.
Don't store products which contain
flammable propellants (e.g. spray cans)
or explosive substances in the appliances.
Avoid open flames (candles, lamps etc.)
and other sources of ignition.
Thoroughly ventilate the room in which
the appliance is situated.
Refrigerant
Caution: Risk of Fire
Should the refrigerant circuit be damaged:
4
Risk of child entrapment. Before you throw
away your old refrigerator or freezer:
Take off the doors
Leave the shelves in place so that
children may not easily climb inside.
5
Installing Your New Appliance
WARNING
Before using the appliance for the first time,
you should be informed of the following tips.
For proper installation, this refrigerator
must be placed on a level surface of
hard material that is the same height
as the rest of the flooring. This surface
should be strong enough to support a
fully loaded refrigerator.
The rollers, which are not casters,
should be only used for forward or
backward movement. Moving the
refrigerator sideways may damage
your floor and the rollers.
Suggestion:
The following figure shows the
minimum installation size of the
appliance, which is different from the
electricity consumption test conditions.
Too small of a distance from adjacent
items may result in lowered freezing
capability and increased electricity
consumption charges. It is advisable
for there to be at least 2" (50mm) of
clearance from the back of the fridge
to the wall, at least 1/2" (12.5mm) of
clearance from its top, at least
1/2" (12.5mm) from its side to the wall
and a clear space in front to allow the
doors to open 130°.
In order to improve efficiency of the
cooling system and save energy, it is
necessary to maintain good ventilation
around the appliance for the dissipation
of heat. For this reason, sufficient clear
space should be available around the
refrigerator.
Ventilation of appliance
This appliance performs well with
ambient temperature between 55°F
(12.8°C) to 110°F (43.3°C). The appliance
may not work properly if left at a
temperature above or below the
indicated range.
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
Note:
Relevant information (inch)
31.3
WW1 DD1D2D3
20.828.734.253.161.4
1/2"
2"
67.9"
W
D
130°
D1
D2
W1
D3
1/2"
Leveling of appliance
0.4" - 0.6"(10 -15mm)
A
A
C
B
C
Adjustable bottom
feet
Front roller
Rear roller
B
For sufficient leveling and air circulating
in the lower rear section of the
appliance, the bottom feet may need to
be adjusted.You can adjust them
manually by hand or by using a suitable
spanner.
To allow the doors to self-close, tilt the
top backwards by 0.4" - 0.6"(10 -15mm).
6
Note:
If required you may lay the refrigerator
on its back in order to gain access to
the base, you should rest it on soft foam
packaging or similar material to avoid
damaging the backboard of the
refrigerator.
Installing the handles
adjustable bottom feet
Before you use the appliance, you
have to install the handles provided in
the fridge chamber.
Not provided
Wrench (5/16")
Monkey wrench
Upper Hinge-Left
Thin-blade
screwdriver
Cross screwdriver
Allen Wrench (5/32")
Upper Hinge
Cover-left
Screw Hole Cover
right Middle Hinge-left
Left stop Block Left Door Stopper
Tools you will need:
Thin blade(utility knife e.g. )
Additional parts (in
the plastic bag)
The longer one is fridge door handle, the
shorter one is freezer door handle. Please
follow procedures below to install and
reverse the handle.
Take out the screw hole covers on the
doors, install the handle supports 1. Place
the handle 3 and 4 on the doors by fitting
the handle over the handle supports 1,
then fasten the screws 2 with 5/32" Allen
wrench (provided in plastic bag).
WARNING!
When reversing the door, the
appliance must not be
connected to the Power, Ensure
that the plug is removed from
the power socket.
NOTE
If required, you may lay the
refrigerator on its back in order
to gain access to the base,
you should rest it on soft foam
packaging or similar material
to avoid damaging the
backboard of the refrigerator.
To reverse the door, the following steps
generally recommended.
1. Take out the screw hole covers on the doors,
install the handle supports 1. Place the handle 3
and 4 on the doors by fitting the handle over
the handle supports 1, then fasten the screws 2
with 5/32" Allen wrench (provided in plastic
bag).
1. Stand the refrigerator upright. Open the door
to take out all door racks (to avoid damage)
and then close the door.
CAUTION!
Please slightly squeeze the
door rack from two sides
toward center and inside of
door rack, and then move it
upward when taking out the
upper rack and lower rack.
7
When you reverse the door, please move the
handle 3, the screws 2 and the handle supports
1 to the right side. Move the screw hole covers
5 to the left side.
Reversing the door
The side at which the door opens can
be changed, from the right side (as
supplied) to the left side if required.
1
2
3
1
2
1
24
2
1
2
1
5
1
2
3
5
2. With the door closed, unscrew 1 and remove
upper hinge cover-right 2 from the right-top
corner of cabinet. Remove the reed switch 4
and the humidity sensor unit 5 from the cabinet
and upper hinge cover-right 2, Install them on
the upper hinge cover-left (provided in the
plastic accessory bag). Unscrew the three
screws 3 which are used for fixing the upper
hinge-right (see the picture below).
1
2
3
4
5
3. Remove the upper hinge-right (please hold
upper door by hand when installing.
4. Remove the upper door from the middle
hinge by carefully lifting the door straight up.
Then place the upper door on a smooth surface
with its panel upwards.
5. Unscrew the two screws 6, then take out the
right door stopper for fridge door 7 and the
right stopper block for fridge door 8, Install the
replacement left door stopper 9 and left
stopper block 10 (provided in the plastic
accessory bag) to the left side with screws 6.
Keep 7 and 8 with the appliance for future
reference.
9
10
6
7
8
6
6. Open the freezer door, use the Allen wrench
(provided in the plastic accessory bag) to
unscrew the screws (11) and the 2 screws (13)
used to fix the middle hinge-right (12) and
remove middle hinge -right (12). Keep the
middle hinge -right (12) for future reference.
8
7. Change screw hole covers and screw on
middle cover plate from left to right (as
shown in figure below).
8. Put out the Middle Hinge-left (14,
provided in the plastic accessory bag),
then screw it with the screws (11) and the 2
screws (13) from right side.
9. Install the screw hole cover-right 11
(provided in the plastic accessory bag) to
the right-top corner of cabinet. Remove
screw hole cover-left 12 from the left-top
corner of cabinet with the thin-blade
screwdriver and Keep the screw hole
cover-left and upper hinge-right for future
reference.
11
12
10. Carefully slot the upper door onto the
middle hinge pin and hold in position. Move
the upper door to an appropriate position,
adjust the upper hinge-left (provided in the
plastic accessory bag) and upper door, then
fit the hinge pin into the hinge hole at the top
of the upper door to secure it in place. Then fix
the upper hinge part with screws (Please
carefully hold the upper door by hand when
installing).
11. Assemble the upper hinge cover-left to
match the hinge. Install the door racks to
original position. Keep the upper hinge cover-
right with the appliance for future reference.
Disassembling the freezer Door
There are two doors in freezer compartment,
and it provide with an upper drawer with a
tray and also a lower drawer with a tray.
You can follow below same steps to
disassemble the drawers, trays and doors.
1. Pull out the freezer door and the upper
drawer(1) to the final position.
9
13
12
11
13
14
11
2. Take out the ice storage box(2)
(if equipped).
3. Remove the 2 screws(3) fixed on the
upper drawer with Phillips(+)
screwdriver.
4. Take out the upper drawer by lifting it
up from the rail system.
1
2
3
1
5. Take out the lower drawer(5) by lifting it
up.
6. Remove the 2 screws(6) holding the
support with Phillips(+) screwdriver.
5
6
6
10
Inhaltsverzeichnis
Sprachen:
Andere Hisense Kühlschrank Handbücher
Hisense
Hisense FV14D6AWD Montageanleitung
Hisense
Hisense H720FSB-WD Montageanleitung
Hisense
Hisense FMN560BSE Montageanleitung
Hisense
Hisense RS694N4TB1 Montageanleitung
Hisense
Hisense FV21D6AWE Montageanleitung
Hisense
Hisense RF540N4AI1 Montageanleitung
Hisense
Hisense RS-11DC4SAB/CPA Bedienungsanleitung
Hisense
Hisense RB329N4AWE Montageanleitung
Hisense
Hisense FMN544I20S Montageanleitung
Hisense
Hisense FV105D4BC2 Montageanleitung
Hisense
Hisense RQ758N4SAI1 Montageanleitung
Hisense
Hisense RB440N4AD1 Bedienungsanleitung
Hisense
Hisense HR6VFF255 Bedienungsanleitung
Hisense
Hisense 250 Series Montageanleitung
Hisense
Hisense HRCD610TS Montageanleitung
Hisense
Hisense FSN570W20B Montageanleitung
Hisense
Hisense HRF254N6DSE Bedienungsanleitung
Hisense
Hisense BCD-560 Montageanleitung
Hisense
Hisense H780SB-IDL Montageanleitung
Hisense
Hisense RF208N6ASE Montageanleitung
Beliebte Kühlschrank Handbücher anderer Marken
Bonnet Neve
Bonnet Neve SKYVIEW PLUS Bedienungsanleitung
Zanussi Electrolux
Zanussi Electrolux ZERB 8441 Bedienungsanleitung
Sharp
Sharp SJ-BA31IEXW2-EU Bedienungsanleitung
CORBERO
CORBERO CC2300MCW Bedienungsanleitung
KitchenAid
KitchenAid 2205264 Bedienungsanleitung
Stengel
Stengel KU 1101 A++ Bedienungsanleitung
