Hitachi HILU75203 Bedienungsanleitung

Installation Manual

Model: HILS75204/HILU75203

Interactive Flat Panel Display

75˝

(74.52˝)

QUICK SETUP GUIDE

For further information, see the user manual.

Please contact directly if you have questions on the use of the touch monitor after

reading the Installation Manual and User Manual.

IMPORTANT:

Please read the precautions, safety instructions and this installation manual carefully

before installing the touch monitor.

CAUTION:

Changes or modifications not expressly approved by the party responsible for

compliance with the FCC Rules could void the user’s authority to operate this

equipment.

1. Precautions and safety instructions

Before using the touch monitor, please read this quick setup guide thoroughly to help

protect against damage to your own and other people‘s property and ensure your own

and other people‘s personal safety.

Be sure to observe the following instructions.

For your safety, be sure to observe the warnings contained in this guide.

For installation or adjustment, please follow this quick setup guide and refer all

servicing to qualified service personnel.

Safety Precautions

If smoke or a peculiar smell comes from the monitor, remove the power plug from the

socket immediately.

Failure to do above, it may result in an electric shock.

Contact your dealer for inspection.

If the monitor has been turned on but there isn’t a picture, remove the power plug

from the socket immediately. Failure to do above, it may result in an electric shock.

Contact your dealer for inspection.

If water is spilled or objects are dropped inside the monitor, remove the power plug

from the socket immediately.

Failure to do above, it may result in an electric shock.

Contact your dealer for inspection.

If the monitor is dropped or the cabinet is damaged, remove the power plug from the

socket immediately.

Failure to do above, it may result in an electric shock.

Contact your dealer for inspection.

To turn off the power of the monitor completely, remove the power plug from the

socket

If the power cord or plug is damaged or becomes hot, turn off the main power switch

of the monitor, make sure the plug has cooled down and remove the plug from the

socket. If the monitor is still used in this condition, it may cause an electric shock.

Contact your dealer for replacement.

Moving and Carrying Notice

Moving Notice:

Moving the monitor requires at least four people. If not, it may drop and a serious

injury may result.

Carrying Notice:

This monitor is heavy; please follow the instructions below when you are ready to

carry the monitor. Failure to do, it may cause injury.

Installation

Don‘t install in a high-temperature environment.

If the monitor is used in a high-temperature environment or in direct sunlight, it may

cause the case or other parts to become distorted or damaged resulting in

overheating or electric shock. Don‘t install in a high-humidity environment. This may

cause overheating or electric shock.

Don‘t install near any heat sources such as radiators, hot-air outlets, stoves, or other

apparatus that produce heat. This may cause an electric shock.

Don‘t overload sockets or cables beyond electrical capacity. Don‘t use extension

leads, otherwise this may cause an electric shock.

Don‘t insert the power plug into a socket other than 100~240V AC.

This may cause an electric shock.

• Don’t use a damaged power plug or worn socket.

• Don‘t insert the wrong plug as it may cause an electric shock.

Do not place monitors on unstable shelves or surfaces. They could collapse and

cause damage. Only install the unit on vertical, stable and level surfaces.

Don‘t place objects on the touch monitor.

•If the touch monitor is covered or the vents are blocked, the monitor could overheat

and cause a fire.

•If metal or liquid gets into the monitor, it may cause an electric shock.

•Do not place heavy objects on the monitor as they may fall causing injury.

•Please keep a minimum distance of 10 cm between the monitor and the other

objects for sufficient ventilation.

Don‘t move the touch monitor when it is connected to the power cord and AV cables.

•When moving the monitor, make sure you remove the plug and cables from the

socket or source.

•When unpacking or carrying the monitor, at least 4 people are needed. Make sure

the monitor is carried upright.

•Transport the monitor upright. Avoid placing the monitor face up or face down.

•Handle the monitor gently. Do not drop.

Wall mounting safety notes

Please make sure the bracket is fixed to a solid wall.

After assembling, please don‘t pull or shake violently.

Please don‘t install the bracket in direct sunlight or areas of humidity / high

temperature for fear that the quality is affected

Install the bracket at a minimum distance of 10 cm from other objects / walls on either

side. Only attach to vertical walls.

2. Package contents

Packing list

Item Q’ty

1. Interactive monitor

2. Carton

3. Bottom cushion

Top cushion 3

Packing bag 1

6. Accessories box

Unpacking

1. Set the LCD Monitor box in front and upright position.

2. Cut the banding and take off 10 clips

3. Open from the top of the box before removing the top cushions.

4. Remove the top cushion and take the accessories box out.

5. Take vinyl bag off and assembled bracket if it needs

Contents of the Accessories box

1. Power cord

2. Remote controller (2x AAA batteries included)

3. USB cable

4. HDMI cable

5. Pen x2

6. CD

7. Pentray

※Note

The following features are considered with the requirements:

- The equipment is intended to be installed on wall but any mounting means are not

provided with the equipment. For the installation, the following statement and

caution described in user manual;

- Ensure that an authorized installation company installs the wall mount(This

monitor shall be installed by qualified service personnel only).

- Otherwise, in may fall and cause personal injury.

- Wall mount have to be dimensioned according to size and weight of the monitor

and according to the instructions of wall mounting device.

3. Description

① ② ③ ④

①LED Indicator

⁻Power ON mode: BLUE

⁻Power OFF(Standby) mode: RED

•Be sure to point the remote control at the remote control sensor on the LED/LCD

Display.

②USB for OPS and external devices.

③Touch USB : USB Port is available when External Source is selected.

④HDMI Input (When connected, it changes to External Source.)

Important Notice

◆The USB cable (3m) that Hitachi provides in this accessory box is for the Touch USB at

the back. Therefore, in case of connecting USB cable to Touch USB port in front,

separate USB cable is required and the length of cable is strongly recommended to be

less than 3m to make sure the signal intensity of touch sensor works properly.

①Button Control

①

③

②

②Rear Panel Connections

1 2

3 4 5 6 7 8 9

1 ON / OFF

2 Display the main screen menu

3 VGA, OPS, EXTERNAL, HDMI 1, HDMI

2, HDMI 3, DP

4 Volume Up (Right)

5 Volume Down (Left)

6 Move Up

7 Move Down

1 Power Switch : ON / OFF

2 AC IN : 100V~ 240V, 50/60Hz

3 HDMI 3 Input

4 HDMI 2 Input

5 HDMI 1 Input

6 Display Port

7 HDMI Output

8 USB For Touch

9 RJ45(LAN)

④

Note: HDMI 1 has separate USB for

Touch located on ③

③Rear Panel Connections

1 RS232/RJ45 SWITCH

2 USB FOR TOUCH HDMI1 ONLY

3 RS232C

4SPEAKER OUT

5 USB 2.0

(Supports USB cam or camera function)

6 USB 3.0

(Supports USB cam or camera function)

7 LAN OUT

8 LAN IN

9 PC RGB IN

10 PC AUDIO IN

11 SPDIF

12 LINE OUT

VGA

L(8Ω)

RS232C

RS232C/

RJ45

USB FOR

TOUCH

(HDMI 1 ONLY)

SPEAKER

OUT

R(8Ω)

USB 2.0

USB 3.0

PC AUDIO

SPDIF

LINE OUT

LAN IN

LAN OUT

AETSTI005200

•To prevent the power cable from falling/shaking, you may use the cable holder if

necessary. SCREW (4x11)

④Installing an OPS PC

There is a slot on ④for OPS PC. When you need to install an OPS PC, remove screws

and existing cover first and screw up again after mounting OPS PC in the slot.

⑤AC cord holder

Andere Handbücher für HILU75203

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hitachi Interaktives Whiteboard Handbücher

Hitachi

Hitachi HILU75203 Bedienungsanleitung

Hitachi

Hitachi StarBoard FX-DUO-77 Bedienungsanleitung

Hitachi

Hitachi StarBoard T-19WX Bedienungsanleitung

Hitachi

Hitachi StarBoard FX-DUO-63 Bedienungsanleitung

Hitachi

Hitachi StarBoard T-17SXLG Bedienungsanleitung

Hitachi

Hitachi StarBoard FX-DUO-63 Bedienungsanleitung

Hitachi

Hitachi HILF75101 Bedienungsanleitung

Hitachi

Hitachi HILU75202 Bedienungsanleitung

Hitachi

Hitachi StarBoard FXDUO Betriebsanleitung

Hitachi

Hitachi StarBoard FX-DUO-88W Bedienungsanleitung

Hitachi

Hitachi StarBoard FX-79E1 Bedienungsanleitung

Hitachi

Hitachi StarBoard FX-TRIO-88W Bedienungsanleitung

Hitachi

Hitachi HILS75204 Bedienungsanleitung

Hitachi

Hitachi StarBoard T-19WX Bedienungsanleitung

Hitachi

Hitachi HILU65203 Bedienungsanleitung

Hitachi

Hitachi FHD7510PC Bedienungsanleitung

Hitachi

Hitachi HILU65203 Bedienungsanleitung

Beliebte Interaktives Whiteboard Handbücher anderer Marken

SMART

SMART KAPP42 Bedienungsanleitung

Buhl

Buhl LyteBoard Bedienungsanleitung

SMART Board

SMART Board 680 Bedienungsanleitung

SMART

SMART SBX880 Bedienungsanleitung

Legamaster

Legamaster e-SCREEN ETX Bedienungsanleitung

SMART Board

SMART Board SBM685ix2 Bedienungsanleitung

Seneca

Seneca eno Bedienungsanleitung

BenQ

BenQ RP840G Bedienungsanleitung

SMART

SMART Sympodium IC-150 Bedienungsanleitung

Olivetti

Olivetti OLIBOARD Bedienungsanleitung

Turning Technologies

Turning Technologies MOBIVIEW Bedienungsanleitung

Panasonic

Panasonic UB-5335 Bedienungsanleitung

Dukane

Dukane ITP84 Bedienungsanleitung

Bretford

Bretford EDUIMS Konfigurationshandbuch

Panasonic

Panasonic Panaboard UB-5315 Bedienungsanleitung

Plus

Plus M-11S Bedienungsanleitung

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Bedienungsanleitung

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Bedienungsanleitung