Hitachi 42V515 - 42" Rear Projection TV Bedienungsanleitung

HITACHI

lnspire the Ne×t

IMPORTANT SAFETY INSTRUCTIONS ................................................................................ 2-3

FIRST TIME USE .................................................................................................................. 4-19

THE REMOTE CONTROL .................................................................................................. 20-37

ON-SCREEN DISPLAY ........................................................................................................ 38-65

LAMP REPLACEMENT ...................................................................................................... 66-69

CARE OF YOUR HITACHI "IV & REMOTE CONTROL .......................................................... 70

RECEPTION PROBLEMS ........................................................................................................ 71

USEFUL INFORMATION /INDEX ...................................................................................... 72-76

As an ENERGYSTARe Partner, Hitachi, Ltd.has determinedthat this

productmeets the ENERGYSTAReguidelinesfor energy efficiency.

IMPORTANT SAFETY INSTRUCTIONS

SAFETY POINTS YOU SHOULD KNOW ABOUT

YOUR HITACHI LCD REAR PROJECTION TELEVISION

Our reputationhas been built on the quality,performance, and ease of service of HITACHI televisions.

Safety isalso foremost in our minds in the design of these units. To help you operate these products properly,this

section illustratessafety tips which will be of benefitto you. Please read it carefully and apply the knowledgeyou

obtain from itto the proper operationof your HITACHI television.

Please filloutyour warrantycard and mail ittoHITACHI. This willenable HITACHI to notifyyou promptlyinthe improb-

able event that a safety problemshould be discoveredin your productmodel.

Follow all warningsand instructionsmarked on thistelevision.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE ]HE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTSINSIDE.

REFER SERVICING TO QUAUFIED SERVICE PERSONNEL

"_e lighting flashwitharrowheadsymbol,wi_in an equilateralt_

angle,is intendedto alertthe userto the presenceof uofnsul_ed

"dangerousvoltage"wl_in the product'senclosurethatmaybeof a

sufr_clentrnagnttudeto consthutea dskofelectricshockto persons,

The exclamationpointwithinan equilateral thang_e,isintendedto

alertthe user to the presenceof importantoperatingand mainte-

nance (sen,icing)i_ in the literatureaccompanyingthe

apl_iance.

WARNING: • TO REDUCE THE RISK OF FIREOR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUSTO

RAIN OR MOISTURE.

•THE TELEVISION SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND OBJECTS

FILLEDWITH LIQUIDS, SUCH ASVASES, SHOULD NOT BE PLACED ON THE TELEVISION.

NOTE: •There are no user serviceable parts inside the television,

•Model and serial numbers are indicated on back side of the television.

CAUTION: Adjustonlythosecontrolsthatare coveredintheinstructions,as improperchangesormodificationsnot

expresslyapprovedbyHITACHIcouldvoidthe user'sauthoritytooperatethetelevision.

MODIFICATIONS: The FCC requiresthe usertobenotifiedthat anychangesormodificationsmadetothis devicethat

are notexpresslyapprovedbyHitachiAmerica,Ltd.Home ElectronicsDivisionmayvoidthe user's

authoritytooperatethe equipment.

POWER SOURCE

THIS TELEVISION IS DESIGNED TO OPERATE ON 120 VOLTS 60Hz, AC CURRENT. INSERT THE

POWER CORD INTO A120 VOLT 60Hz OUTLET.

TO PREVENT ELECTRIC SHOCK, DO NOT USE THE TELEVISION'S (POLARIZED) PLUG WITH AN

EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES AND GROUND TERMI-

NAL CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NEVER CONNECT THE TELEVISION TO 50Hz, DIRECT CURRENT, OR ANYTHING OTHER THAN THE

SPECIFIED VOLTAGE.

NOTE: This televisionreceiver will display television closedcaptioning, (r_l or [_), in accordance with

paragraph 15.119 of the FCC rules.

,_ CAUTION: Never remove the back cover ofthe television as this can expose you tovery high voltagesand other haz-

ards. If the television does not operate properly, unplugthe television and call your authorized dealer or

service center.

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

Follow all wamings and instructionsmarked on this television.

1. Read these instructions.

2. Keep these instructions.

3. Head all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Installin accordance

with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators,heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purposeof the polarized or ground-

ing-type plug, A polarized plug has two blades with one

wider than the other. Agrounding type plug has two blades

and a third grounding prong. The wide blade or the third

prongare providedfor your safety. If the providedplug does

not fit into your outlet, consult an electricianfor replacement

of the obsolete outlet.

10. Protectthe power cord from beingwalked onor pinchedpar-

ticulady at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use the attachments/accessories specified by the man-

ufacturer.

12. _Usa only withthe cart, stand, tripod, brack-

et, or table specified by the manufacturer,

or sold with the apparatus. When a cart is

used, use caution when moving the

cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus dudng lightning storms or when

unused for long periods oftime.

14, Refer all servicing to qualified service personnel, Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally,or has bean dropped.

15.

16.

17.

18.

Televisionsare designed to comply with the recommended

safety standards for tilt and stability.

Do not apply excessive pullingforceto the front, or top,ofthe

cabinet which could cause the productto overturn resulting

in productdamage and/or personal injury.

Follow instru_ons for wall, shelf or ceiling mounting as rec-

oromended by the manufacturer.

An outdoor antenna should not be located in the vicinityof

overhead power lines or other elsotricel circuits.

Ifan outsideantenna isconnected to the receiverbe sure the

antenna system is grounded so as to provide some protec-

tion against voltage surges and built up static charges,

Section 810 of the National Electdc Code, ANSI/NFPA No,

70-1984, providesinformationwith respect to proper ground-

ing for the mast and supportingstructure, groundingof the

lead-in wire to an antenna discharge unit, size of grounding

connectors, locationofantenna-discharge unit,connection to

grounding electrodes and requirements for the grounding

electrode.

Note tothe CATV system installer: This reminder is provid-

ed to call the CATV system installer'satten_on toArticle820-

40 of the NEC that provides guidelines for proper grounding

and, in particular, specifies that the cable ground shall be

connected to the groundingsystem ofthe building,as close

to the pointof cable entry as practical

Do not place any objects on the top of the television which may fall or cause a child to climb to retrieve the objects.

This product contains lead and a lamp that contains mercury. Dispose of this product end its lamp in accordance with

applicable environmental laws. For lamp recycling and disposal information, go to wwwJamprecycle.org. For

product recycling and disposal information, contact your local government agency or the Electronic Industries

Alliance at www.eiae.org (in the US) or the Electronic Product Stewardship Canada at www.epsc.ca (in Canada).

For more information, call "1-800-HITACHI."

PUBLIC VIEWING OF COPYRIGHTED MATERIAL

Public viewing of programs broadcast by TV stations and sable companies, as well as programs from other sources, may require

prior authorization from the broadcaster or owner of the video program material.

•This productincorporates copyright protectiontechnologythat is protected by U,S. patents and other intellectualpropertyrights.

Use ofthiscopyright protection technologymust be authorized by MacrovisionCorporation, and is intendedfor homeand other

limitedconsumer uses only unless otherwise authorized by Macrovision. Reverse enginsering or disassembly is prohibited.

ACCESSORIES

NR N

__iiiiiiiiiqli

xX N_=X _

:iqq:UJi

iiiiiilN II!i

9h n

KI] NIl]

NNNNN

Check to make sure you have the following accessoriesbefore disposingof the packing material.

REMOTE CONTROL

{÷ ,_ ,,÷)

_®_@ ;_

4,_ (0";

-:.0

__%

_e, ,_, ,_'_,

HITACHI

BATTERIES

("AA°)

1. Remote Control UnitCLU-3842WL (Part No. HL02062) or CLU-3844WL (Part No. HL02064).

2. Two =AA_ size, 1.5V batteries (For Remote Control Unit).

REMOTE CONTROL BA'R'ERY INSTALLATION AND REPLACEMENT

1. Open the battery cover ofthe remote controlby pushingthe notched part ofthe cover withyourfingers and pullingthe

cover off.

2. Inserttwo new "AA" size batteriesfor the remote control. When replacingoldbatteries, pushthem towardsthe springs

and liftthem out.

3. Match the batteriesto the (+) and (-) marks inthe battery compartment.

4. Replace the cover. BoI-rOM VIEW

Remote Control)

//_ CAUTION: Danger ofexplosion if battery is incorrectly replaced. Replace with the same or equivalent type.

HOW TO SET UP YOUR NEW HITACHI LCD REAR PTV

ANTENNA

Unless your LCD Rear PTV is connected to a cable TV system or to acentralized antenna system, a good outdoor "IV antenna is .....

recommended for best performance. However, ifyou are located in an exceptionallygood signalarea that isfree from interferenceand m

multiple image ghosts,an indoor antenna may be sufficient. (_i!i

LOCATION ..-I

Select an area where sunlight or brightindoor illuminationwill not fell directlyon the picture screen. Also, be sure that the location

selected allowsafree flow of air to and from the perforatedback cover of the set. m

To avoid cabinet waq_ing,cabinet color changes, and increased chance of set failure, do not place the TV where temperatures can

become excessivelyhot, for example, in directsunlight or near a heating appliance, etc.

When installingyour LCD Rear P'IV against a wall, keep itat least 10 cm (4 inches) from the wall.

VIEWING

iiiii_i ili

The major benefit of the HITACHI LCD Rear P'IV is its large viewing screen. To see this large screen at its best, tsst various locations

in the roomto find the optimum spot for viewing.

The best picture isseen by sitlJngdirectlyin front ofthe TV and about 10 to 18 feet from the screen. Picture brightnessdecreases as

the viewer moves to the left and rightof the receiver.

During daylight hours, reflectionsfrom outside light may appear on the screen. If so, drapes or screens can be used to reduce the

reflectionor the TV can be located in a different sectionof the room.

If the TV's audio outputwill be connected to a Hi-Fi system's extemal speakers, the pest audio performance will be obtained by placing

the speakers equidistantfrom each side of the receiver cabinet and as close as possible to the height of the picturescreen center. For

best stereo separation, place the external speakers at least four feet from the side of the TV, place the surround speakers to the side

or behind the viewing area. Differences in room sizes and acoustical environments will require some experimentation with speaker

placement for best performance.

J-

0' 5' I(Y 15'

]

/0ill,0 ,, ,0

4.!o0mI

IMPORTANT NOTES:

1. Since LCD Rear PTV incorporates a high pressure lamp to display an image, it may take about one minute for the picture to

become stable, after the power has been turned on. After extended use, the picture may darken, the color may look unusual,

or the lamp =goesout," (burns out). You may hear a =pop" sound when the lamp =goes out." These are common

charactedstice of the lamp, and should not be considered defective.

2. LCD Rear PTV incorporates an advanced cooling fan system to prevent from overheating. If you hear the coolingfan, it should

not be considered defective.

3. If you hear a "cracking"sound from the "IV cabinet, it is due to the TV's cabinet expanding and contracting due to room

temperature changes. It has no effect on the TV's functions.

4. The LCD Rear PTV cabinet isconstructed with all plastic. Make sure to place it on a fiat surface. An uneven surface might

warp the cabinet and reduce the picture quality.

HOOK-UP CABLES AND CONNECTORS

Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors.

For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell

audio_'ideo products.Below are illustrationsand names of common connectors, Before purchasingany cables, be sure of the output

and input connectortypes required by the various components and the length of each cable.

N!IIIIJJI

ci;%;II!

ii!!iiiii}i il

H!i!kiiU.i

300-Ohm Twin Lead Connector

This outdoorantenna cable must be connected to an antenna

adapter (300-Ohm to 75-Ohm). ©

Phono Connector

Used on all standard video and audio cables which connect to

inputs and outputs located on the television's rear jack panel

and front control panel.

"F" "lype 75-Ohm Coaxial Antenna Connector

For connectingRF signals (antenna or cable "I'V)to the antenna

jack on the television.

S-Video (Super Video) Connector

This connector is used on camcorders, VCRs and laser- disc

players with an S-Video feature in place of the

standardvideo cable to produce a highquality picture.

D-SUB MINI 9-Pin Cable

This cable is used to connect to the RS232C input located on

the rear panel so you can control some of your TV functions

from an external home control system.

HDMI Cable

Thiscable isused to connect your extemal devices suchas Set-

Top-Boxes or DVD players equipped with an HDMI output con-

nectionto the TV's HDMI input.

ANTENNA CONNECTIONS TO REAR JACK PANEL

VHF (75-Ohm) antenna/CAW (Cable l"V)

When usinga 75-Ohm coaxial cable system,connectCATV coaxialcable to the ANT

A (75-Ohm) terminal. Ifyou have an antenna, connectthe coaxial cable to _ANT

B terminal.

VHF (300-Ohm) antenna/UHF antenna

When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or

UHF antenna leads to screws of the VHF or UHF adapter. Plug the adapter into

the antenna terminal on the TV.

When both VHF and UHF antennas are connected

Attach an optional antenna cable mixer tothe TV antenna terminal, and connect

the cables to the antenna mixer. Consult your dealer or service store for the

antenna mixer.

To outdoor antenna

"Toantenna

To o_ool" VHF

c_ UHFante_t

ANTA/ANT B Fr0m0utd0or

From UHF_ten_ CAWSystem

SIDE PANEL CONTROLS

_-mr7

_-mD

¢-m D

®®®®

,Bun

]

(_ MENU/SELECT button

This button allowsyou to enter the MENU, making it possibleto set ]_/features to your preference without using the remote. This

but_n also serves as the SELECT buttonwhen in MENU mode.

(_ INPUT/EXIT button

Pressthis buttontodisplaythe input menu, AntA/B, INPUT:1,2,3,4 or 5. Thisbuttonalso serves as the EXIT buttonwhen inMENU

mode.

(_) CHANNEL selector

Press these buttons until the desired channel appears in the top right comer of the TV screen. These buttons also serve as

the cursor down (V) and up (&) buttons when in MENU mode.

(_ VOLUME level

Press these buttonsfor your desired sound level. The volume levelwill be displayed on the TV screen. These buttonsalso serve

as the cursor left(,) and right(1_)b|Jttonswhen in MENU mode. When the TV power isturned OFF at avolume level 31 orgreater,

the volume level willdefault to 30 when the TV is turned ON. However, if it is setto alevel 30 or less, the volume levelwill be at

the level it was set when the TV is turned ON.

(_ SIDE INPUT JACKS (INPUT 5)

Use these audio/video jacks for a quick hook-up from a cemcorder or VCR to instantlyview your favorite show or new recording.

Press the INPUT/EXIT buttononthe front control panel untilVIDEO: 5 appears in the top rightcomer ofthe "FVscreen. If you have

mono sound, insert the audio cable into the left audio jack.

(_IR RECEIVER sensor

The screen area acts as the IR receiver (remote sensor). When using the remote control, point it towards the screen for best

response.

(_) POWER button

Press this buttonto turn the TV on or off.

iiiiii ii

i--iiil i¸¸¸

--.!!ili!!

rrli !ii i

i;i ii_i ii_iii i!

ii i i_ii i! i _!!

SIDE PANEL CONTROLS

®POWE..,g..

This lightis onduring normal operation,

Light BlinkingSlowly (2 seconds): televisionlamp is coolingdown. It takes 12-15 seconds to warm up and about2 minutes tocool

down.

ii iiiii¸im

i_!!ii!!in"!

NOTES:

1. INDICATOR

LAMP LED

TEMP

LED

INDICATION ACTION

LIGHT ON

BLINKING

MEANING

NO LAMP LIGHT

or BROKEN LAMP

LIGHT ON

BLINKING

LIGHT ON

FAST BLINKING

SLOW BLINKING

WRONG LAMP UNIT

ASSEMBLY/LAMP

DOOR OPEN

Too hot inside the

OPTIC unit

COOLING FAN STOPPED

NORMAL

OPERATION

POWER 1. -5 secs.

COOL DOWN 2. 5~15 secs.

COOL DOWN 3.15-20 secs.

Need to replace if

LAMP stilldoes not light by

"Power On" again.

Check assembly conditionof

LAMP UNIT

Call forService

.amp isstillon. Power ON isavailable.

_amp isoff. Power ON is not available.

.amp isoff. Power ON isavailable.

2. If the LAMP, TEMP, and POWER LED are blinkingin the orderbelow, the television iswarming up.

POWER --_TEMP--b LAMP

+ I

3. Your HitachiLCD Rear ProjectionTelevision may appear to be OFF when itis set toinput 1- input5 and the video

signalis not receivedfrom the inputjacks. Please make sure the Blue Power lightindicatoris not llt(OFF) when

you are notwatchingfor long lastingperformance.

4. Your HitachiLCD Rear ProjectionTelevision has an intemal lamp that lights up the TV screen. Make sureto tum off

the Power when you do not watch the LCD Rear ProjectionTelevision for longerlamp life.

(_ TEMP indicator

This light isoff during normal operation.

Ifthis indicatoris lit,the optic unit is too hot. If this indicatoris blinking,the cooling fan has stopped, Please call service,

(_ LAMP indicator - NORMAL OPERATION INDICATOR IS OFF

If light is lit, the lamp has failed. See page 69-72 for lamp replacement procedure. Consult your Hitachi dealer for proper part.

If light is blinking, lamp cover is not assembled securely after replacement.

IMPORTANT NOTES:

A small number of missing, discolored, or lit all the time dots or pixels is characteristic of TFT LCD technology due to the

manufacturing process irrespective of manufacturer.

SIDE PANEL JACKS AND CONNECTORS

The aide panel jacks are provided as a convenience to allow you to easily connect a cemcorder or VCR as shown in the following

examples:

-Irl_i !!i!

LJH_m

S-VIDeO

...,f.oo

I Opt ona, see note

°o

V S-VHS

Backef VCR

S-VIDEO

NJO_O

L.0

LS-VHS

S-VHSVideocamera

i(_!i _i

k!i!ii_iii_ii¸

NOTE: 1. Completely insert connection cord plugs when connecting tofront panel jacks. Ifyou do not,the played back picture

may be abnormal.

2. If you have a S-VHS VCR, use the S-INPUT cable in place ofthe standard video cable.

3. If you have a mono VCR, insertthe audio cable into the left audio jack of your TV.

REAR PANEL JACKS

!i! ii ii! _

iiii!ii!l.U!

!iiii•i

i,iiii!!iiiiiiiii!iii

-o-1

-6-/

-o-: J

I I I

HR:3mI'_

O----

(_) Antenna Input/Output

The remote control allowsyou to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A inputcan

be displayed asamain pictureor sub-picture. ANT B can only be displayed as a main picture. (ANT B cannot be displayed as a

sub-picture.) The antenna output labeled "TO CONVERTER" allows the ANT A connection to pass directlyto a different source

such as a cable box, only when ANT B is displayed as a main picture.

(_) Audio/Video Inputs 1, 2, 3 and 4

By using the INPUTS buttonand CURSOR PAD of the remote controlyou can select each video source. Use the audio and video

inputstoconnect extemal devices,suchas VCRs, camcorders, laserdisc players, DVD playersetc. (Ifyou have monosound, insert

the audio cable intothe left audio jack.)

NOTE: You may use VIDEO or S-VIDEO inputsto connect to INPUT 3 and 4, butonly one of these inputs may be used at a

time.

(_ MONITOR OUT

These jacks provide fixed or vadabie audio and video signals which are used for recording. Use the S-VIDEO Output for high

quality video output (see page 65).

(_ S-VIDEO Inputs 3 and 4

Inputs3 and 4 provideS-VIDEO (Super Video) jacks for connecting equipmentwith S-VIDEO outputcapability,

(_ Component: Y-PBPR Inputs

Inputs1 and 2 provideY-PBPRjacks for connecting equipment withthis capability,such as a DVD player or Set TopBox. You may

use composite video signal for both inputs.

NOTES: 1. Do not connectcomposite VIDEO and S-VIDEO to Input 3, 4 or 5 at the same fdme. S-VIDEO has priodty

over VIDEO input.

2. Your component outputsmay be labeled Y, B-Y, and R-_ In this case. connect the components B-Y outputtothe TV's PB inputand

the components R-Y output to the "l'V'sPR input.

3. Your component outputs may be labeled Y-CBCR. In this case, connect the component CB outputto the TV's PB input and the

component CR outputto the TV's PR input.

4. It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPR inputs(see page 42).

5. To ensure no copyright ihtdngement, the MONITOR OUT output will be abnormal, when using the Y-PBPR jacks.

6. Input 1 and Input 2 (Y/VIDEO) can be used for composite video and component video input.

Andere Handbücher für 42V515 - 42" Rear Projection TV

Inhaltsverzeichnis

Andere Hitachi Projektionsfernsehen Handbücher

Hitachi

Hitachi 53UWX10BA Bedienungsanleitung

Hitachi

Hitachi 53SDX89B Bedienungsanleitung

Hitachi

Hitachi 50EX14BV Bedienungsanleitung

Hitachi

Hitachi 51SWX20B Bedienungsanleitung

Hitachi

Hitachi 50C20A Bedienungsanleitung

Hitachi

Hitachi 50VS810 - 50" Rear Projection TV Bedienungsanleitung

Hitachi

Hitachi 50V720 - 50" Rear Projection TV Bedienungsanleitung

Hitachi

Hitachi 50V720 - 50" Rear Projection TV Bedienungsanleitung

Hitachi

Hitachi 53SBX01 Bedienungsanleitung

Hitachi

Hitachi 55DMX01W Bedienungsanleitung

Hitachi

Hitachi 42V515 - 42" Rear Projection TV Bedienungsanleitung

Hitachi

Hitachi 50C20 - LCD Projection TV Bedienungsanleitung

Hitachi

Hitachi 50V500 - UltraVision Digital - 50" Rear Projection... Bedienungsanleitung

Hitachi

Hitachi 51G500S Bedienungsanleitung

Hitachi

Hitachi 43FDX10B Bedienungsanleitung

Hitachi

Hitachi 50EX20B Bedienungsanleitung

Hitachi

Hitachi 42V710 - 42" Rear Projection TV Bedienungsanleitung

Hitachi

Hitachi 55VS69A Bedienungsanleitung

Hitachi

Hitachi 62VS69 - UltraVision VS69 Series Bedienungsanleitung

Hitachi

Hitachi 51F500 DP23 Bedienungsanleitung

Hitachi

Hitachi 53SDX01B Bedienungsanleitung

Hitachi

Hitachi 50EX12BA Bedienungsanleitung

Hitachi

Hitachi 57S715 Bedienungsanleitung

Hitachi

Hitachi 50VF820 - 50" Rear Projection TV Bedienungsanleitung

Beliebte Projektionsfernsehen Handbücher anderer Marken

Samsung

Samsung ST-43T6P Bedienungsanleitung

Toshiba

Toshiba ColorStream TP50G60 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-65734 Bedienungsanleitung

Optoma

Optoma EP652A Bedienungsanleitung

Samsung

Samsung SP43T8HPX/XEC Bedienungsanleitung

Philips

Philips 28PW6006 - annexe 1 Bedienungsanleitung

Sony

Sony KP-57WS500 - 57" Hi-scan 1080i™ 16:9 Projection... Benutzerhandbuch

Philips

Philips 43PP8421 Bedienungsanleitung

RCA

RCA P52950 Bedienungsanleitung

Sony

Sony KP-51DS1U Bedienungsanleitung

Magnavox

Magnavox 51MP392H - 51" Widescreen Hd Ready Tv Bedienungsanleitung

Pioneer

Pioneer Elite PRO 510HD Bedienungsanleitung

Philips

Philips 43PP8421 Handbuch

JVC

JVC I'Art Pro AV-48P776 Bedienungsanleitung

Sony

Sony GRAND WEGA KDF-55XS955 Bedienungsanleitung

Sony

Sony KP-46WT520 - Wide Screen Projection Tv Bedienungsanleitung

Toshiba

Toshiba 42HM66 - 42" Rear Projection TV Bedienungsanleitung

Philips

Philips 50PL9200D Bedienungsanleitung