Hitachi CP-TW2505 Bedienungsanleitung

Projector

CP-TW2505/CP-TW3005

User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

►Before using this product, please read all manuals for this

product. Be sure to read “Safety Guide” rst. After reading them, store them in a

safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The illustrations in this manual are for illustrative purposes. They may differ

slightly from your projector.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect

handling.

Please refer to the pages written following this symbol.



NOTICE This entry notices of fear of causing trouble.

Contents

Introduction ...............3

Features ......................3

Checking the contents of package

...3

Part names ....................4

Setting up .................9

Arrangement ...................9

Connecting with your devices

.....12

Connecting to a power supply

.....18

Using the security bar and slot ....18

Using the cable cover ...........19

Remote control ............20

Interactive pen ............23

Power on/off ..............24

Operating ................27

Adjusting the volume ............27

Temporarily muting the screen and

audio output ..................27

Selecting an input signal .........28

Selecting an aspect ratio .........28

Selecting an Interactive Function . . 29

Calibration ....................29

Adjusting the projector's elevator . . 30

Adjusting the zoom and focus .....30

Using the automatic adjustment feature

...31

Using the TEMPLATE feature .....32

Other buttons .................32

Adjusting the position ...........33

Correcting the keystone/perfect t

distortions

....................33

Using the magnify feature ........34

Temporarily freezing the screen ...35

Using the menu function ........36

EASY MENU. . . . . . . . . . . . . . . 38

Iwb calIbrate, aspect,

D-zoom,

Keystone,

Keystone, perfect fIt

pIcture moDe,

eco moDe, InstallatIon, reset, fIlter tIme,

language, aDvanceD menu, exIt

IWB menu ................41

PICTURE menu ............42

brIghtness, contrast, hDcr,

accentualIzer, gamma, color temp,

color, tInt, sharpness, actIve IrIs, mymemory

IMAGE menu ..............46

aspect, over scan, v posItIon, h posItIon,

h phase, h sIze, auto aDjust execute



INPUT menu ..............49

progressIve, vIDeo nr, color space,

vIDeo format, DIgItal format, DIgItal

range, computer In, frame locK,

resolutIon

mhl stanDby pwr.

SETUP menu ..............54

D-zoom, D-shIft, pIct.posIt.h,

Keystone,

Keystone, perfect fIt

setup memory,

lamp & fIlter, Image optImIzer, InstallatIon

stanDby moDe

AUDIO menu ..............61

volume, speaKer, auDIo source,

mIc level,mIc volume

SCREEN menu.............63

language, menu posItIon, blanK,

auto blanK, start up,

MyScreen,

MyScreen Lock

, message, source name,

template, c.c.

OPTION menu .............69

auto search, DIrect power on,

auto power off, mybutton, scheDule,

servIce

NETWORK menu ...........83

SECURITY menu ...........84

securIty passworD change,

MyScreen

passworD, pIn locK,

mytext passworD, mytext DIsplay,

mytext wrItIng, clonIng locK

Presentation tools .........89

Interactive function ...............89

PC-LESS Presentation ..........116

USB Display (Windows

computer)

. 126

USB Display (Mac computer)

......131

Maintenance .............135

Replacing the lamp ............135

Cleaning and replacing the air lter . 137

Caring for the projection window and

camera lens

...................139

Replacing the internal clock battery

... 140

Other care ...................141

Troubleshooting ..........142

Related messages ............142

Regarding the indicator lamps ...144

Resetting all settings ...........147

Phenomena that may be easy to

be mistaken for machine defects

. . 147

Specications ............159



Introduction

• Keep the original packing materials, for future reshipment. Be sure

to use the original packing materials when moving the projector. Use special

caution for the lens.

NOTE

Introduction

The projector provides you with the broad use by the following features.

Checking the contents of package

ü The unique optics system produces a large projected image in a short

distance, which provides you with various ways of use.

ü This projector has a variety of I/O ports that supposedly cover for any

business scene.

ü The HDMI/MHL port can support various image equipment which have digital

interface to get clearer pictures on a screen.

ü Has HDCR and ACCENTUALIZER features which are Hitachi's original

image stabilizer for a clearer image.

ü Has DICOM® ("Digital Imaging and Communication in Medicine") simulation

mode.This mode simulates the DICOM standard, which is a standard

applicable to digital communications in medicine.

ü This projector can be controlled and monitored via LAN connection.

Furthermore, you can use the designated USB wireless adapter (optional) to

establish wireless LAN connection.

ü The built-in 16W speaker can deliver sufcient sound volume in a large

space like a classroom without external speakers.

ü This projector's network supports the PJLink™ standard.PJLink™ is a unied

standard for operating and controlling data projectors.For specications of

PJLink™, see the web site of the PJLink™.

ü Equipped with IMAGE OPTIMIZER which is Hitachi's original function to

maintain visibility by automatic image correction in accordance with lamp

deterioration.

ü The Interactive Pen included with the projector allows you to write or draw

directly on the projected image. Also, you can control the connected computer

on the screen in the same way as using a mouse.

Please see the Contents of package section in the User’s Manual (concise)

which is a book. Your projector should come with the items shown there. Require

of your dealer immediately if any items are missing.

Features

Introduction

(1) Lamp cover (135)

The lamp unit is inside.

(2) Control panel (5)

(3) Elevator feet (x 2) (30)

(4) Remote sensor (x 2)(21)

(5) Projection window (139)

(6) Intake vents

(7) Filter cover (137)

The air lter and intake vent

are inside.

(8) Speaker (15, 27, 61)

(9) Exhaust vent

(10) AC (AC inlet) (18)

(11) Ports (6)

(12) Security bar (18)

(13) Security slot (18)

(14) Spacer (x 2) (30)

(15) Battery cover (140)

(16) Camera lens (139)

►HOT! : Do not touch around the lamp cover and the exhaust

vents during use or just after use, since it is too hot.

►Never look into the projection window while the projection lamp lights, since

the projection lamp ray may cause a trouble on your eyes.

►Do not use the security bar and slot to prevent the projector from falling down,

since it is not designed for it.

WARNING

►Maintain normal ventilation to prevent the projector from

heating up. Do not cover, block or plug up the vents. Do not place anything that

can stick or be sucked to the vents, around the intake vents. Clean the air lter

periodically.

CAUTION

Part names

Projector

(16)

(15)

(4)

(10)

HOT!

(1) (2)

(6)

(3) (3)

(7)

(8)

(11)

(12)

(13)

(9)

(14) (14)

(5)

Introduction

Part names (continued)

Control panel

(1) STANDBY/ON button (24)

(2) INPUT button (28)

(3) POWER indicator (24, 144)

(4) TEMP indicator (144)

(5) LAMP indicator (144)

Buttons ◄/►/▲/▼

(6) FOCUS +/- buttons

when no menu is displayed (31), or

Cursor ◄/► buttons

when a menu is displayed (36). FOCUS +/- function is invalid when the

USB TYPE A port is selected as the input source.

(7) MENU buttons

when no menu is displayed (36), or

Cursor ▲/▼ buttons

when a menu is displayed (36).

The ◄/►/▲/▼ buttons on the projector work only as the cursor buttons while the

template is displayed (67).

(1)

(7) (2)

(3)

(5)

(4) (6)

Introduction

Part names (continued)

Ports (12 ~ 17)

(1) USB TYPE A port (x2)

(2) LAN port

(3) USB TYPE B port

(4) HDMI1/MHL port

(5) HDMI2 port

(6) MIC port

(7) AUDIO IN1 port

(8) AUDIO IN2(L,R) ports

(9) AUDIO OUT port

(10) COMPUTER IN1 port

(11) COMPUTER IN2 / MONITOR OUT port

(12) VIDEO IN port

(13) CONTROL port

(14) Option port *

(1)

(12) (8)

(6)

(11)

(10)

(2)

(3)

(4)

(7)

(9)

(13)

(14)

* Option port is a port used only when using the optional part (FT-01B).

A cover is attached for protecting the port. Do not remove the cover. Refer to

the manual of the optional part (FT-01B) for detail.

NOTE

(5)

Introduction

Part names (continued)

Remote control

(1) INPUT button (28)

(2) IWB button (29)

(3) CALIBRATION button (29)

(4) STANDBY/ON button (24)

(5) ASPECT button (28)

(6) AUTO button (31)

(7) ACCENTUALIZER button (32)

(8) HDCR button (32)

(9) FOCUS - button (31)

(10) FOCUS + button (31)

(11) D-ZOOM - button (30)

(12) D-ZOOM + button (30)

(13) PAGE UP button (22)

(14) MAGNIFY - ON button (34)

(15) MY BUTTON - 1 button (71)

(16) VOLUME + button (27)

(17) PAGE DOWN button (22)

(18) MAGNIFY - OFF button (34)

(19) MY BUTTON - 2 button (71)

(20) VOLUME - button (27)

(21) KEYSTONE/PERFECT FIT button (33)

(22) TEMPLATE button (32)

(23) FREEZE button (35)

(24) AV MUTE button (27)

(25) ESC button (36)

(26) MENU button (36, 37)

(27) ENTER button (36, 37)

(28) POSITION button (33, 37)

(29) RESET button (36)

(30) ▲/▼/◄/► cursor buttons (36)

(31) Battery cover (20)

Back of

the remote control

(31)

CALIBRATION

KEYSTONE/

ASPECT

ACCENTUALIZER

HDCR

AV MUTE

POSITION

ESC MENU

RESET

IWB

AUTO

PAGE

DOWN

OFF

FREEZE

UP 1

ENTER

FOCUS

D-ZOOM

＋

ー

VOLUME

MAGNIFY

MYBUTTON

INPUT

PERFECT FIT

TEMPLATE

(2)

(1)

(6)

(5)

(10)

(9)

(13)

(14)

(17)

(18)

(21)

(22)

(25)

(30)

(28)

(3)

(4)

(7)

(8)

(11)

(12)

(16)

(15)

(20)

(19)

(24)

(23)

(26)

(27)

(29)

Introduction

Part names (continued)

Interactive pen

(1) Pen tip (23)

(2) Battery cover (23)(1) (2)

• Interactive Pen is henceforth denoted as "pen".

NOTE

Setting up

(continued on next page)

Install the projector according to the environment and manner the projector will be

used in.

Arrangement

Refer to table T-1 and gures F-1 and F-2 at the end of User’s Manual (concise) to determine

the screen size and projection distance.

The values shown in the table are calculated for a full size screen.

a Screen size (diagonal)

b1 , b2 Projection distance (±8%)

c1 , c2 Screen height (±8%)

• For the case of installation in special conditions such as on the wall or ceiling, the

specied mounting accessories and service may be required. Tabletop use must be

setup with the designated optional accessories. Before installing the projector, consult

your dealer about your installation.

•

The screen position may shift after installation if the projector is mounted on locations

such as the wall or ceiling, due to the exibility of the plastic projector body. If readjustment

is necessary, consult with your dealer or service personnel.

• The projected image position and/or focus may change during warm-up (approx. 30

minutes after the lamp is turned on) or when the ambient conditions change. Readjust

the image position and/or focus as necessary.

• Since the projector features an ultra short throw, be aware that it is required to select a

screen carefully to have better performance.

- A soft screen such as a pull-down screen may cause serious distortion of a projected

image. A hard screen such as a board screen is recommended for use with this

projector.

- A high-gain screen such as a bead screen that has narrow viewing angle is not suitable

for this projector. A low-gain screen (around 1.0) such as a matte screen that has wide

viewing angle is recommended for use with this projector.

A screen with a weave pattern may cause moiré on the projected image, which is not a

failure of the projector. A screen that has less moiré effects is recommended for use with this

projector.

►

Place the projector in a stable horizontal position. If the

projector falls or is knocked over, it could cause injury and/or damage to the

projector. Using a damaged projector could then result in re and/or electric shock.

• Do not place the projector on an unstable, slanted or vibrational surface such

as a wobbly or inclined stand.

• Do not place the projector on its side or front position. To place the projector

on its rear position for the table top use, it is required to use the designated

optional parts. Consult with your dealer.

• Consult with your dealer before a special installation such as on the wall or

ceiling.

WARNING

Setting up

Arrangement (continued)

(continued on next page)

►Place the projector in a cool place, and ensure that there is

sufcient ventilation. The high temperature of the projector could cause re,

burns and/or malfunction of the projector.

• Do not stop-up, block or otherwise cover the projector's vents.

• Keep a space of 30 cm or more between the sides of the projector and other

objects such as walls.

• Do not place or attach anything that would block the projection window, camera

lens or vent holes.

• Do not place the projector on metallic thing or anything weak in heat.

• Do not place the projector on carpet, cushions or bedding.

• Do not place the projector in direct sunlight or near hot objects such as heaters.

Do not place the projector where the air from an air conditioner or similar unit

will blow on it directly.

•

Do not place anything near the projection window or vents, or on top of the

projector. It causes high temperature and could result in re or smoke.

•

Do not place anything that may be sucked into or stick to the vents on the

bottom of the projector. This projector has some intake vents also on the bottom.

►Do not place the projector anyplace where it may get wet. Getting the projector

wet or inserting liquid into the projector could cause re, electric shock and/or

malfunction of the projector.

• Do not place the projector in a bathroom or the outdoors.

• Do not place anything containing liquid near the projector.

•

Do not place the projector where any oils, such as cooking or machine oil, are used.

►

Use only the mounting accessories the manufacturer specied, and leave installing

and removing the projector with the mounting accessories to the service personnel.

• Read and keep the user’s manual of the mounting accessories used.

WARNING

Andere Handbücher für CP-TW2505

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hitachi Projektor Handbücher

Hitachi

Hitachi CP-X3010Z series Bedienungsanleitung

Hitachi

Hitachi CP-WU13K Bedienungsanleitung

Hitachi

Hitachi Performa CP-RS55 Bedienungsanleitung

Hitachi

Hitachi CP-X385W Bedienungsanleitung

Hitachi

Hitachi CP-X445 Technisches Dokument

Hitachi

Hitachi CP-WX2515WN Bedienungsanleitung

Hitachi

Hitachi LP-TW4001 Bedienungsanleitung

Hitachi

Hitachi CP-A100 Series Technisches Dokument

Hitachi

Hitachi CP-BX301WN Bedienungsanleitung

Hitachi

Hitachi CP-WU8450 Bedienungsanleitung

Hitachi

Hitachi CP-X380W Bedienungsanleitung

Hitachi

Hitachi CP-X990 Bedienungsanleitung

Hitachi

Hitachi CPX305 - XGA LCD Projector Montage- und Wartungsanleitung

Hitachi

Hitachi PJ-LC5 Bedienungsanleitung

Hitachi

Hitachi CP-X2 series Bedienungsanleitung

Hitachi

Hitachi CP-X268A Technisches Dokument

Hitachi

Hitachi CP-X275W Bedienungsanleitung

Hitachi

Hitachi CP-X8150 Bedienungsanleitung

Hitachi

Hitachi CP-S235 Konfigurationshandbuch

Hitachi

Hitachi CP-X2510 series Bedienungsanleitung

Hitachi

Hitachi CP-WX625 Bedienungsanleitung

Hitachi

Hitachi CPX265 - XGA LCD Projector Bedienungsanleitung

Hitachi

Hitachi CP-AW250N Bedienungsanleitung

Hitachi

Hitachi Innovate ED-X50 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung