Hitachi CPX605 - 4000 Lumens XGA LCD Projector Bedienungsanleitung

Projector

CP-X505/CP-X605

User’s Manual – Network Functions

This manual is only intended to explain Network Functions.

For safety, operations or any other issues, refer to the all user's manual for this

projector.

• Before using the network functions, read the all user's manual

for this projector carefully to ensure your projector is set up correctly.

• After reading, keep the manuals in a safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Contents

Network Functions .................................................................. 2

Settings ................................................................................... 6

Projector Control ................................................................... 22

Failure & Warning Alerts via E-mail ...................................... 26

Projector Management via SNMP.......................................... 28

Controlling the Projector via Scheduling .............................. 29

e-SHOT(Still Image Transfer) Display ................................... 32

Command Control via the Network ....................................... 34



Trademark acknowledgment

• Windows is a registered trademark of Microsoft Corporation.

• Netscape is a registered trademark of Netscape Communications Corporation.

• JavaScript is a registered trademark of Sun Microsystems, Inc.

All other trademarks are the properties of their respective owners.

Network Functions

Conguring and Controlling the Projector via a Web Browser

You can change the settings of or control the projector via a network by using a

web browser from a PC that is connected to the same network.

(4)

Failure & Warning Alerts via E-mail

The projector can automatically send an alert to specied e-mail addresses when

the projector requires maintenance or has encountered an error.

(26)

Projector Management via SNMP

This projector is SNMP (Simple Network Management Protocol) compliant,

allowing you to monitor it from a remote location using SNMP software. In

addition, the projector is able to send failure & warning alerts to a specied PC.

(28)

Controlling the Projector via Scheduling

You can schedule the projector to perform various functions according to the

DATE and TIME.

(29)

Still Image Transfer

The projector can display still images that are transferred via the network.

(32)

Projector Control via RS-232C via the Network

The projector can be controlled using RS-232C commands over a network.

(34)

This projector is equipped with the following network functions.

Network Functions

Before using the network functions…

To use the network functions of this projector, the projector must be congured to

suit your network. Consult with your network administrator before connecting the

projector to your network. Incorrect network conguration of this projector may

cause problems on your network.

Connect to the Gateway (The router/PC that forwards trafc to a destination

outside of the subnet of the transmitting device) from the network terminal on the

projector using a CAT-5 cable and congure the following settings.

If using a network with DHCP enabled:

The projector’s network settings can be congured automatically. when [DHCP]

on the network menu is set to [TURN ON]. Please refer to DHCP in network

menu. (Operating Guide : NETWORK Menu) If a xed / static IP address is required,

please congure your projector according to the steps in the following section.

If using a network system that does not have DHCP enabled or if

using a xed IP address on a network system equipped with DHCP

enabled:

Congure the following settings on the network menu.

(Operating Guide : NETWORK Menu)

1. [DHCP]: Disable DHCP (Set [DHCP] to [TURN OFF]).

2. [IP ADDRESS]: Enter an appropriate IP address for the projector to connect

to your network.

3. [SUBNET MASK]: Enter an appropriate SUBNETMASK for the projector to

connect to your network.

4. [DEFAULT GATEWAY]: Enter an appropriate Gateway (the router/PC that

forwards trafc to a destination outside of the subnet of the transmitting

device) address for the projector to connect to your network.

Network Functions

Conguring and controlling the projector via a web browser

You can adjust or control the projector via a network from a web browser on a PC

that is connected to the same network.

• Internet Explorer 5.5 or higher or Netscape 6.2 or higher are required.

• If JavaScript is disabled in your web browser conguration, you must enable

JavaScript in order to use the projector web pages properly. See the Help les

for your web browser for details on how to enable JavaScript.

• This projector is SSL (Secure Socket Layer) compliant. Please specify “https://”

when the entering the projector address.

• If no operations are performed via a web browser for approx. 50 seconds the

system will automatically log off. Please Re-log on to continue operations via a

web browser.

• After you logon, a small, blank window will appear behind the main operation

window. Please do not close this small, blank window. If this window is closed,

the system will automatically log off after certain period of time even if an

operation is being performed.

The small, blank window will close when the main operation window is closed.

• The small, blank window may be considered a pop-up and be blocked if you

are using Windows XP Service Pack 2, or using other security software.

If Service Pack 2 blocks the window the following message will appear:

"Pop-up blocked. To see this pop-up or additional options click here..."

Please select "Temporarily Allow Pop-ups" or "Always Allow Pop-ups From This

Site..." to allow the window to open.

• It is recommended that all web browser updates be installed. It is especially

recommended that all users running Internet Explorer on a Microsoft Windows

version prior to Windows XP Service Pack 2 install security update Q832894

(MS04-004) or the web browser interface may not be displayed correctly.

And when using an older version of Internet Explorer, during operations the

browser will log out after 50 seconds.

NOTE

Network Functions

When conguring or controlling the projector via a web browser, an ID and

password are required. There are two types of IDs, Administrator IDs and User

IDs. The following chart describes the differences between user and administrator

IDs.

Below are the factory default settings for administrator IDs, user IDs and

passwords.

Item Description

Administrator ID

User ID

Network Information Displays the projector’s current

network conguration settings. √ √

Network Settings Displays and congures network

settings. √N/A

Port Settings Displays and congures

communication port settings. √N/A

Mail Settings Displays and congures e-mail

addressing settings. √N/A

Alert Settings Displays and congures failure &

warning alerts. √N/A

Schedule Settings Displays and congures schedule

settings. √N/A

Date/Time Settings Displays and congures the date and

time settings. √N/A

Security Settings Displays and congures passwords

and other security settings. √N/A

Projector Control Controls the projector. √ √

Projector Status Displays and congures the current

projector status. √ √

Network Restart Restarts the projector’s network

connection. √N/A

Item ID Password

Administrator ID Administrator <blank>

User ID User <blank>

Conguring and controlling the projector via a web browser (Continued)

Settings

Refer to the following for conguring or controlling the projector via a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter

[https://192.168.1.10] into the

address bar of the web browser and

the screen in Fig. 1 will be displayed.

2) Enter your ID and password and click

[Logon].

If the logon is successful either the Fig.2 or Fig.3 screen will be displayed.

3) Click the desired operation or conguration item on the main menu located on

the left-hand side of the screen (Fig. 2 or Fig. 3).

Fig. 2 (Logon with administrator ID) Fig. 3 (Logon with user ID)

Fig. 1

Settings

Network Information

All screen images displayed in this manual are

screens of a logon using an administrator ID.

Any administrator only functions will not be

displayed when using a user ID. Refer to the

descriptions in each table.

Displays the projector’s current network conguration settings.

Item Description

DHCP Displays the DHCP conguration settings.

IP Address Displays the current IP address.

Subnet Mask Displays the Subnet Mask.

Default Gateway Displays the Default Gateway.

MAC Address Displays the MAC address.

Firmware Date Displays the network rmware time stamp. This information is only

displayed when logged on using an administrator ID.

Firmware Version Displays the network rmware version number. This information is

only displayed when logged on using an administrator ID.

Settings

Network Settings

Displays and congures network settings.

Click the [Apply] button to save the settings.

• The new conguration settings are activated after restarting the

network connection. When the conguration settings are changed, you must

restart the network connection. You can restart the network connection by

clicking [Network Restart] on the main menu.

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

NOTE

Item Description

IP Conguration Congures network settings.

DHCP ON Enables DHCP.

DHCP OFF Disables DHCP.

IP Address Congures the IP address when DHCP is disabled.

Subnet Mask Congures the Subnet Mask when DHCP is disabled.

Default Gateway Congures the Default Gateway when DHCP is disabled.

Projector Name Congures the Projector name.

SysLocation Congures the location to be referred to when using SNMP.

SysContact Congures the contact information to be referred to when

using SNMP.

Settings

Port Settings

Displays and congures communication port settings.

Click the [Apply] button to save the settings.

• The new conguration settings are activated after restarting the

network connection. The network connection must be restarted when the

conguration settings are changed. The network connection can be restarted

using [Network Restart] on the main menu.dresses.

NOTE

Item Description

Network Control Port1

(Port:23) Congures command control port 1 (Port:23).

Port open Click the [Enable] check box to use port 23.

Authentication Click the [Enable] check box when authentication is required

for this port.

Network Control Port2

(Port:9715) Congures command control port 2 (Port:9715).

Port open Click the [Enable] check box to use port 9715.

Authentication Click the [Enable] check box when authentication is required

for this port.

Image Transfer Port

(Port:9716) Congures the image transfer port (Port:9716).

Port open Click the [Enable] check box to use port 9716.

Authentication Click the [Enable] check box when authentication is required

for this port.

SNMP Port Congures the SNMP port.

Port open Click the [Enable] check box to use SNMP.

Trap address Congures the destination of the SNMP Trap in IP format.

SMTP Port Congures the SMTP port.

Port open Click the [Enable] check box to use the e-mail function.

Settings

Mail Settings

Displays and congures e-mail addressing settings.

Click the [Apply] button to save the settings.

• You can conrm whether the mail settings work correctly using the

[Send Test Mail] button.

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

NOTE

Item Description

Send Mail

Click the [Enable] check box to use the e-mail function.

Congure the conditions for sending email under [Alert

Settings].

SMTP Server IP Address Congures the address of the mail server in IP format.

Sender E-mail address

Congures the sender e-mail address.

The length of the sender e-mail address can be up to 255

alphanumeric characters.

Recipient E-mail address

Congures the e-mail address of up to ve recipients. You

can also specify [TO] or [CC] for each address. The length of

the recipient e-mail address can be up to 255 alphanumeric

characters.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hitachi Projektor Handbücher

Hitachi

Hitachi CP-X4014WN Bedienungsanleitung

Hitachi

Hitachi CP-A222WN Bedienungsanleitung

Hitachi

Hitachi CP-X807(EDX50WL) Bedienungsanleitung

Hitachi

Hitachi CP-RX80 - XGA LCD Projector Bedienungsanleitung

Hitachi

Hitachi CP-WX1100 Bedienungsanleitung

Hitachi

Hitachi CP-X430W Bedienungsanleitung

Hitachi

Hitachi CP-X200 CP-X300 Bedienungsanleitung

Hitachi

Hitachi CP-X935W Bedienungsanleitung

Hitachi

Hitachi CPWX8 Bedienungsanleitung

Hitachi

Hitachi CP-X4020 Bedienungsanleitung

Hitachi

Hitachi CP-X950 Bedienungsanleitung

Hitachi

Hitachi CP-AW2503 Bedienungsanleitung

Hitachi

Hitachi CPX265 - XGA LCD Projector Bedienungsanleitung

Hitachi

Hitachi CP-X250 series Leitfaden

Hitachi

Hitachi X308 - CP XGA LCD Projector Bedienungsanleitung

Hitachi

Hitachi MP-WU8101W Bedienungsanleitung

Hitachi

Hitachi CP-X1200 Series Bedienungsanleitung

Hitachi

Hitachi CP-X206 Bedienungsanleitung

Hitachi

Hitachi CP-X9110 Bedienungsanleitung

Hitachi

Hitachi CP-X2510Z and Technisches Dokument

Hitachi

Hitachi X1250 - XGA LCD Projector Benutzerhandbuch

Hitachi

Hitachi CP-X605 Series Bedienungsanleitung

Hitachi

Hitachi CP-S420 Bedienungsanleitung

Hitachi

Hitachi CP-X980W Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

Epson

Epson PowerLite 810p Bedienungsanleitung