Hitachi Compute Blade 500 Series Bedienungsanleitung
© 2012-2015 Hitachi, Ltd. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, or stored in a database or retrieval
system for any purpose without the express written permission of Hitachi, Ltd.
Hitachi, Ltd., reserves the right to make changes to this document at any time without notice and
assumes no responsibility for its use. This document contains the most current information available
at the time of publication. When new or revised information becomes available, this entire
document will be updated and distributed to all registered users.
Some of the features described in this document might not be currently available. Refer to the most
recent product announcement for information about feature and product availability, or contact
Hitachi Data Systems Corporation at https://portal.hds.com.
Notice: Hitachi, Ltd., products and services can be ordered only under the terms and conditions of
the applicable Hitachi Data Systems Corporation agreements. The use of Hitachi, Ltd., products is
governed by the terms of your agreements with Hitachi Data Systems Corporation.
Hitachi is a registered trademark of Hitachi, Ltd., in the United States and other countries. Hitachi
Data Systems is a registered trademark and service mark of Hitachi, Ltd., in the United States and
other countries.
Archivas, Essential NAS Platform, HiCommand, Hi-Track, ShadowImage, Tagmaserve, Tagmasoft,
Tagmasolve, Tagmastore, TrueCopy, Universal Star Network, and Universal Storage Platform are
registered trademarks of Hitachi Data Systems Corporation.
AIX, AS/400, DB2, Domino, DS6000, DS8000, Enterprise Storage Server, ESCON, FICON,
FlashCopy, IBM, Lotus, MVS, OS/390, RS6000, S/390, System z9, System z10, Tivoli, VM/ESA,
z/OS, z9, z10, zSeries, z/VM, and z/VSE are registered trademarks or trademarks of International
Business Machines Corporation.
All other trademarks, service marks, and company names in this document or website are
properties of their respective owners.
Microsoft product screen shots are reprinted with permission from Microsoft Corporation.
ii
Hitachi Compute Blade 500 Series Getting Started Guide
Contents
Preface...................................................................................................v
Safety Information.................................................................................................... vi
Safety precautions.............................................................................................. vi
Common precautions concerning safety............................................................... vii
About operations and actions.............................................................................. vii
The need for each individual to pay attention and take care.................................. vii
General safety precautions..................................................................................vii
Intended Audience...................................................................................................xiii
Product Version....................................................................................................... xiv
Release Notes......................................................................................................... xiv
Document Organization............................................................................................xiv
Referenced Documents............................................................................................ xiv
Document conventions.............................................................................................xiv
Convention for storage capacity values...................................................................... xv
Getting help............................................................................................................ xvi
Comments.............................................................................................................. xvi
Safety guidelines..................................................................................xvii
Safety and warning labels.......................................................................................xviii
Server chassis..................................................................................................xviii
Server blade....................................................................................................xviii
1 Preparing for installation....................................................................... 1-1
Items to prepare ahead of installation...................................................................... 1-2
System Console................................................................................................1-2
LAN cable........................................................................................................ 1-2
2 Initial setup..........................................................................................2-1
Overview................................................................................................................2-2
System console configuration...................................................................................2-2
Network settings.............................................................................................. 2-3
Browser settings...............................................................................................2-3
LAN cable connection........................................................................................2-3
Management module configuration.......................................................................... 2-4
Initial setting procedure.................................................................................... 2-4
Login............................................................................................................... 2-4
iii
Hitachi Compute Blade 500 Series Getting Started Guide
Changing password.......................................................................................... 2-6
Chassis ID code settings................................................................................... 2-7
Network information settings.............................................................................2-9
Logout........................................................................................................... 2-11
Switch module configuration..................................................................................2-13
Brocade 10 Gb/sec DCB switch module initial configuration................................2-31
3 Powering on/off system unit..................................................................3-1
Powering on system unit......................................................................................... 3-2
Powering off system unit.........................................................................................3-2
iv
Hitachi Compute Blade 500 Series Getting Started Guide
Preface
This document provides site planning information for Compute Blade. Please
read this document carefully, and maintain a copy for reference.
Notice: The use of Compute Blade 500 series and all other Hitachi Data
Systems products is governed by the terms of your agreement(s) with Hitachi
Data Systems.
□Safety Information
□Intended Audience
□Product Version
□Release Notes
□Document Organization
□Referenced Documents
□Document conventions
□Convention for storage capacity values
□Getting help
□Comments
Preface v
Hitachi Compute Blade 500 Series Getting Started Guide
Safety Information
Safety precautions
When giving safety precautions, this manual uses the headings below. The
headings below consist of a safety alert symbol and one of the following
heading labels: WARNING, CAUTION, or NOTICE.
This is a safety warning symbol. This draws attention to risks (hidden
dangers) to human safety. To avoid injury or death, follow the
instructions in the message concerning safety that appears after this
symbol.
This indicates a risk of death or severe injury.
This indicates a risk of relatively mild or moderate injury.
This indicates a risk of severe damage to the equipment or damage to
surrounding property.
Example label 1: Electric Shock Hazard
Icons represented by indicate that you need to take care. A graphic
that indicates why you need to take care, such as Electric Shock Hazard,
is placed inside .
Example label 2: Disassembly Prohibited
Icons represented by indicate prohibited actions. A graphic that
indicates the prohibited action, such as Disassembly Prohibited, is placed
inside . Note that if there is no graphic inside , the icon indicates a
general prohibition.
Example label 3: Unplug Power Cable
Icons represented by indicate required actions. A graphic that indicates
the required action, such as Unplug Power Cable, is placed inside . Note
that indicates a general, required action.
vi Preface
Hitachi Compute Blade 500 Series Getting Started Guide
Common precautions concerning safety
Please carefully read through, and fully understand, the following safety
instructions:
•When operating the equipment, follow the instructions and procedures in
the manual.
• Always follow the notes, cautionary statements, and advice indicated on
this product or in the manual.
• When installing options on this product or connecting options to this
product, always check the manuals for those options and follow the
instructions in those manuals.
Failing to do so might result in injury, fire, or damage to the equipment or
other property.
About operations and actions
Do not perform operations or actions that are not described in the manual.
If there is a problem regarding this product, turn off the power, unplug the
power cable, and then contact your retailer or maintenance personnel.
The need for each individual to pay attention and take care
The notes, cautionary statements, and advice indicated on this product or in
the manual were considered carefully. However, unexpected accidents or
incidents might occur. When performing operations, in addition to following
the instructions, you need to personally pay attention and take care.
General safety precautions
When handling this product, always follow the precautions below:
Handling power cables
Always use the power cables shipped with the equipment, and follow the
instructions below: Inappropriate handling can damage the power cables
and expose copper wires. Such damage can cause short circuiting, partial
disconnection, and overheating, which in turn can cause electric shocks
and fire.
¢Do not place any object on the power cables.
¢Do not place power cables near devices that become hot.
¢Do not heat the power cables.
¢Do not collect power cables into bundles.
¢Do not continuously subject the power cables to ultraviolet or strong
visible light.
¢Do not use damaged power cables.
¢Do not use the power cables in a high-temperature environment.
Preface vii
Hitachi Compute Blade 500 Series Getting Started Guide
¢Do not use the power cables above their specified rating.
¢Do not use the power cables for other devices.
¢Do not touch a power plug with wet hands.
Do not place any objects around the electrical outlets if the objects might
prevent users from quickly unplugging a power cable.
Poor contact and arc tracking
Comply with the following instructions when handling a power plug.
Otherwise, arc tracking or poor contact might cause overheating and fire.
¢Make sure that the power plug is fully and securely inserted into the
electrical outlet.
¢Before inserting the power plug, make sure that there is no dust or
water on the plug.
If any dust or water is found, wipe it off with a dry cloth, and then
insert the plug.
Handling for power outlets
¢Use a grounded 2-pin plug-in power outlet. Outlets of any other type
might cause an electric shock or fire.
¢To prevent electric shock, connect the outlet's grounding electrode to
a grounding terminal installed by a qualified electrician. Without a
connection to a grounding terminal, an electric shock can occur if the
power supply fails.
Plugging in and unplugging
When inserting a power plug into or removing a power plug from an
electrical outlet, be sure to hold the plug part. If you pull the cable, the
cable might partially break. The break might cause overheating and fire.
Power supply modules
A power supply module contains a high-voltage area. Therefore, do not
open the cover. If you do so, an electric shock or equipment failure might
occur.
Installing a power supply slot cover
When removing a power supply unit, do not insert your hand or tools
inside the power slot. After removing a power supply unit, install a power
supply slot cover. Inside the power supply slot, some conductors are
exposed. Touching them with your hands or tools might cause electric
shock or an equipment failure.
Abnormal heat, smoke, abnormal noise, or abnormal odors
If anything abnormal occurs, turn off the power and unplug all the
equipment power cables (a maximum of 4) from the electrical outlets.
viii Preface
Hitachi Compute Blade 500 Series Getting Started Guide
Do not repair, remodel, or disassemble
Do not attempt to repair, remodel, or disassemble the equipment on your
own, except to perform expansion work in accordance with the
instructions in this manual. Attempting to do so might cause electric
shock, fire, or burns. In particular, the inside of a power supply unit
contains many high-voltage areas. Touching them is dangerous.
Removal of a cover or bracket
Do not remove covers or brackets. Removing them might cause electric
shock, burns, or an equipment failure.
High temperature at the cover of a power supply module
When a power supply module is in operation, the cover and handle get
hot. Be careful when replacing a failed module. Hot parts can cause
burns.
High temperature at the 10GBASE-R transceiver
The 10GBASE-R transceiver in the 10Gbps LAN switch module gets hot
during operation. To remove the transceiver, therefore, turn off the power
supply for the 10Gbps LAN switch module from the management module,
and then wait for at least 5 minutes. Hot parts can cause burns.
Adding and replacing internal parts of the equipment
The cover and internal parts are hot immediately after the power is
turned off. Wait for about 30 minutes before adding or replacing internal
parts unless otherwise specified in this manual. Hot parts can cause
burns.
Laser beam
¢A Class 1 laser product is installed on this product. Do not look
directly at the laser beam. Do not look at the laser beam by using an
optical instrument.
¢Under the laser module cover, a laser beam is being emitted. Do not
remove the cover of an unused board.
Handling the product
¢Install the product on a fixed rack. Do not lean against the product or
stand on it. Do not install the product in a place with weak floors or
walls.
¢Do not subject the product to excessive vibration. Dropping the
product or allowing it to fall over might cause an equipment failure.
Installing the unit in a rack
Preface ix
Hitachi Compute Blade 500 Series Getting Started Guide
¢To install the system unit in, or remove it from, a rack cabinet, always
get help from at least one other person and use tools to avoid strain.
If the system unit has to be installed in 31U or higher in the rack
cabinet or the system unit has already been installed there, call for
maintenance personnel instead of attempting to install or remove the
system unit. Defective installation might cause the system unit to fall,
resulting in injury or unit failure.
¢When pulling a unit out from a rack cabinet to work on it, attach a
stabilizer to the rack cabinet. Excessive force might cause the rack
cabinet to fall down, resulting in injury or an equipment failure. If a
stabilizer is not attached, call for maintenance personnel.
Using a rack cabinet
When using a rack cabinet, do not place anything on the system unit
mounted on the cabinet and do not use the top of the system unit
mounted on the cabinet as a work bench. A heavy object placed on top of
the system unit on the cabinet might fall, resulting in injury.
Contact with metal edges
When moving the equipment or adding parts, take care not to hurt
yourself on the metal or plastic edges. Inappropriate handling can cause
injuries.
Improper battery type
There is a risk of explosion if a battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Handling batteries
Maintenance personnel should replace batteries. Do not replace batteries
by yourself. Follow the instructions described below. Inappropriate
handling can result in injury because a battery can overheat, burst, or
catch fire.
¢Do not charge a battery.
¢Do not short out a battery.
¢Do not disassemble a battery.
Storing batteries
When storing batteries, apply adhesive tape to the terminals for
insulation. If the batteries are stored without insulation, the terminals can
contact each other to cause a short circuit and overheat or burst, leading
to injury or fire.
Insertion of foreign objects into the equipment
xPreface
Hitachi Compute Blade 500 Series Getting Started Guide
Andere Handbücher für Compute Blade 500 Series
10
Inhaltsverzeichnis
Andere Hitachi Server Handbücher
Hitachi
Hitachi DS225 Montageanleitung
Hitachi
Hitachi DS7000 Series Bedienungsanleitung
Hitachi
Hitachi Compute Blade 500 Series Bedienungsanleitung
Hitachi
Hitachi Compute Blade 500 Series Bedienungsanleitung
Hitachi
Hitachi Compute Rack 220H Stücklistenhandbuch
Hitachi
Hitachi Compute Blade 500 Series Stücklistenhandbuch
Hitachi
Hitachi HA800 Series Bedienungsanleitung
Hitachi
Hitachi 3080 Bedienungsanleitung
Hitachi
Hitachi DS7000 Series Bedienungsanleitung
Hitachi
Hitachi DS220 G2 Montageanleitung
Hitachi
Hitachi Compute Blade 500 Series Bedienungsanleitung
Hitachi
Hitachi Advanced Server HA810 G2 Bedienungsanleitung
Hitachi
Hitachi Advanced Server DS220 Montageanleitung
Hitachi
Hitachi DS240 Bedienungsanleitung
Hitachi
Hitachi UM-S700 Bedienungsanleitung
Hitachi
Hitachi Compute Blade 500 Series Bedienungsanleitung
Hitachi
Hitachi HA820 G3 Series Bedienungsanleitung
Hitachi
Hitachi Compute Blade 320 Bedienungsanleitung
Hitachi
Hitachi Compute Rack 220S Stücklistenhandbuch
Hitachi
Hitachi Compute Blade Series Allgemeine Anweisungen
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung