HMS Ewon Flexy Series Bedienungsanleitung

Flexy Family User Guide

USER MANUAL

UM-0002-00 1.4 en-US ENGLISH

Important User Information

Disclaimer

The information in this document is for informational purposes only. Please inform HMS Industrial Networks of any

inaccuracies or omissions found in this document. HMS Industrial Networks disclaims any responsibility or liability

for any errors that may appear in this document.

HMS Industrial Networks reserves the right to modify its products in line with its policy of continuous product

development. The information in this document shall therefore not be construed as a commitment on the part of

HMS Industrial Networks and is subject to change without notice. HMS Industrial Networks makes no commitment

to update or keep current the information in this document.

The data, examples and illustrations found in this document are included for illustrative purposes and are only

intended to help improve understanding of the functionality and handling of the product. In view of the wide range

of possible applications of the product, and because of the many variables and requirements associated with any

particular implementation, HMS Industrial Networks cannot assume responsibility or liability for actual use based on

the data, examples or illustrations included in this document nor for any damages incurred during installation of the

product. Those responsible for the use of the product must acquire sufficient knowledge in order to ensure that the

product is used correctly in their specific application and that the application meets all performance and safety

requirements including any applicable laws, regulations, codes and standards. Further, HMS Industrial Networks will

under no circumstances assume liability or responsibility for any problems that may arise as a result from the use of

undocumented features or functional side effects found outside the documented scope of the product. The effects

caused by any direct or indirect use of such aspects of the product are undefined and may include e.g. compatibility

issues and stability issues.

Flexy Family User Guide User Manual UM-0002-00 1.4 en-US

Table of Contents Page

1 Preface ................................................................................................................................. 3

1.1 About This Document .......................................................................................................3

1.2 Document History ............................................................................................................3

1.3 Related Documents ..........................................................................................................3

1.4 Trademark Information.....................................................................................................3

2 Requirements ...................................................................................................................... 4

2.1 Hardware .......................................................................................................................4

2.2 Software.........................................................................................................................4

3 Get in Touch with the Flexy................................................................................................ 5

3.1 Assigning an IP Address.....................................................................................................5

3.2 Accessing the Web Configuration Interface........................................................................... 5

4 Quick Launch Wizard........................................................................................................... 6

4.1 System Wizard.................................................................................................................6

4.2 Internet Wizard ...............................................................................................................7

4.3 VPN Wizard.....................................................................................................................8

4.4 Gateway Wizard ..............................................................................................................8

5 Remote Access..................................................................................................................... 9

6 Create Tags and Monitor Values ...................................................................................... 10

6.1 Available IO Servers........................................................................................................ 10

6.2 Tag Management........................................................................................................... 10

6.3 Tag Creation.................................................................................................................. 10

6.4 Monitor Tags................................................................................................................. 13

7 Alarm Management .......................................................................................................... 14

7.1 Configure Alarm Settings for a Tag .................................................................................... 14

7.2 Alarm Display ................................................................................................................ 14

7.3 Alarm Summary............................................................................................................. 14

7.4 Alarm History ................................................................................................................ 15

7.5 Alarm Actions................................................................................................................ 15

8 Real-time Logging.............................................................................................................. 17

8.1 Real-time Logging Configuration ....................................................................................... 17

8.2 Real-time Graph ............................................................................................................ 17

Flexy Family User Guide User Manual UM-0002-00 1.4 en-US

9 Historical Logging .............................................................................................................. 18

9.1 Historical Logging Configuration ....................................................................................... 18

9.2 Historical Logging Graph.................................................................................................. 18

9.3 Historical Logging Table................................................................................................... 18

10 Files Transfer Page ............................................................................................................ 19

11 Task Planner ...................................................................................................................... 20

11.1 Configure FTP Server Settings........................................................................................... 20

12 Tag Publishing.................................................................................................................... 22

13 Data Management ............................................................................................................ 23

13.1 Talk2M API ................................................................................................................... 23

13.2 Live data and KPI’s ......................................................................................................... 23

14 NAT 1:1 .............................................................................................................................. 24

15 Custom Web Pages............................................................................................................ 25

16 Backup and Restore .......................................................................................................... 26

17 Other Configuration Mechanisms .................................................................................... 27

17.1 FTP.............................................................................................................................. 27

17.2 SD Card ........................................................................................................................ 27

18 Export Block Descriptors................................................................................................... 28

19 Scripting ............................................................................................................................. 29

20 User Management............................................................................................................. 30

21 Troubleshooting ................................................................................................................ 31

21.1 Summary Page .............................................................................................................. 31

21.2 Event Log...................................................................................................................... 31

21.3 Scheduled Actions.......................................................................................................... 32

Preface 3 (34)

1 Preface

1.1 About This Document

This guide presents the features of the Ewon Flexy and explains briefly the steps to take to get a

functional Flexy.

For additional related documentation and file downloads, please visit www.ewon.biz/support.

1.2 Document History

Version Date Description

1.0 2018-01-12 First release

1.1 2018-04-17 Changing scope of the document: Flexy 205 => Flexy Family

1.2 2018-08-29 Changed: List of IO servers

Added: NTP Client / Server

Added: Anybus Bolt Configuration

Added: Time Zone

Added: Tag KPI

Added: String Tags

Added: OPCUA

1.3 2019-06-12 Changed: Disclaimer

1.4 2019-10-03 Changed: Overall display

1.3 Related Documents

Document Author Document ID

Ewon Configured by SD Card HMS AUG-0062-00

eBuddy HMS AUG-0063-00

OPC UA Server HMS AUG-0064-00

Configure your Ewon using FTP HMS KB-0020-00

Email & text message (SMS) relaying using Talk2M HMS KB-0046-00

Alarm Email & SMS Templates HMS KB-0054-00

Publish Tags in SNMP HMS KB-0150-00

Publish Tags in Modbus TCP HMS KB-0184-00

IO Servers HMS RG-0007-00

Reference Guide: Flexy Family HMS RG-0008-00

Export Block Descriptor HMS RG-0009-00

1.4 Trademark Information

Ewon®is a registered trademark of HMS Industrial Networks SA. All other trademarks mentioned

in this document are the property of their respective holders.

Flexy Family User Guide User Manual UM-0002-00 1.4 en-US

Requirements 4 (34)

2 Requirements

2.1 Hardware

This guide presents the features of the Flexy which can be combined with optional extension

cards if needed.

Without extension cards, the Flexy provides Remote Access and Remote Data Services to

Ethernet devices over the local Ethernet network.

Extension cards permit the Flexy to communicate to a wider range of field devices including USB

and serial devices and to use additional Internet connectivity technologies such as Wi-Fi and

cellular modems.

2.2 Software

The Flexy is configured through its web interface which is accessible with any modern web

browser. The recommended platforms are:

• Firefox 15 and higher.

• Chrome 16 and higher.

• Safari 11 and higher.

• Edge 13 and higher.

eBuddy

The companion tool eBuddy assists with initial IP address configuration for the Flexy and with

maintenance tasks such as upgrading firmware, creating/restoring backups...

Download eBuddy.

eCatcher

The companion tool eCatcher is needed if the Flexy will connect to the Talk2M infrastructure to

allow remote access to its plugged in equipment.

Download eCatcher.

Flexy Family User Guide User Manual UM-0002-00 1.4 en-US

Get in Touch with the Flexy 5 (34)

3 Get in Touch with the Flexy

3.1 Assigning an IP Address

The first communication with the Flexy can be established using the companion tool eBuddy

(check Software, p. 4 for more details about eBuddy).

To change the IP address of the Flexy:

1. Connect the port labeled as LAN (port #1) of your Flexy.

This can be done either to the computer point-to-point or through a network if the default

IP of the Flexy, which is 10.0.0.53, will not conflict with another connected device.

2. Start the eBuddy application.

The application scans through the Ethernet adapter network and identifies the connected

Ewon devices displaying the IP address, subnet mask and serial number.

The utility also allows the modification of the default IP address without necessarily being in

the same network range.

3. Optional: Highlight the row representing the device to be modified

4. Click on the button Set IP from the top bar menu or hit the F2 keyboard shortcut.

5. If step 3 was skipped, indicate the serial number of the Flexy to be modified. Click Next.

6. Enter the new IP address and its subnet mask. By clicking Next, eBuddy sends the

commands to the Flexy to change its IP address and to reboot.

7. Once the reboot completes, the Flexy will be accessible at its new IP address.

3.2 Accessing the Web Configuration Interface

The configuration of the Flexy can be done using its internal web pages.

While your computer is connected to a LAN port of the Flexy, open an Internet browser and

enter the LAN IP address of the Flexy into the address field.

If your computer is not in the same network address range as the Flexy, the web interface can be

reached using the EZ DHCP feature of eBuddy. For more information, refer to the eBuddy

reference in Related Documents, p. 3.

Before beginning the configuration of the Flexy, authentication is required. The default login and

password are both adm.

For security reasons, the default password must be changed.

The password can be changed through the System Wizard described below.

At the first boot of the Flexy or after a reset level 2 and after successfully logging in, a prompt

will appear to set the interface language.

After the interface language is selected, a wizard button appears which allows a quick

configuration of the system and communication settings of the Flexy. On later connections, the

configuration wizard is accessible through the Wizards button in the upper right corner.

Flexy Family User Guide User Manual UM-0002-00 1.4 en-US

Quick Launch Wizard 6 (34)

4 Quick Launch Wizard

The Quick Launch Wizard makes it easy to configure the initial system and communication

settings for the Flexy.

Fig. 1 Quick Launch Wizard Button

It passes sequentially through the System Wizard, the Internet Wizard and the VPN wizard:

• The System Wizard configures basic system settings such as the date & time and the default

username & password.

• The Internet Wizard configures the WAN or Internet communication settings for the Flexy.

• Once the Internet Wizard is complete, the VPN wizard connects the Flexy to the Talk2M

VPN infrastructure or to an eFive VPN server.

Based on the hardware configuration of the Flexy, the Quick Launch Wizard can also include the

Gateway Wizard which assists in configuring communication to serial, MPI and USB devices. Each

wizard can also be run independently through the menu options on the right hand of the

Wizards page.

4.1 System Wizard

The System Wizard configures basic system settings.

The first screen of the System Wizard configures the name of the device and the default user

settings. However, checking the Erase all first checkbox will erase all previously configured

settings on the Flexy.

The <Ewon name> helps identify the Flexy for an application. The name appears in the footer of

every web page and can be included in reports and alarm notifications.

The Flexy comes with an initial default user with username adm and password adm.

For security reasons, it is required to change the default password for the adm user. This

username and password can be changed in the System Wizard.

Additional users can be added from Setup ►Users menu. More information about adding

additional users is described later in this document.

Flexy Family User Guide User Manual UM-0002-00 1.4 en-US

Quick Launch Wizard 7 (34)

Click Next to proceed to the second screen.

The second screen of the System Wizard configures the date & time settings. For Talk2M

communication, the date of the Flexy must be correct. Click on the Timezone or Datetime field

icons in the to adjust the date. If typing the date & time directly into the field, be sure to format

the value as shown.

With regard to the timezone option. it allows to configure the timezones including day saving

time [DST] by clicking either on the arrow or the map icon.

Caution

Starting firmwre v13.1s0, the exported Ewon data (through EBD, Talk2M API or any other

methods) with timestamps are by default exported in UTC!

To enable automatic date and time synchronization with an NTP server, check the Enable NTP

checkbox and adjust the NTP synchronization settings as needed.

The default remote NTP server is ntp.talk2m.com but other NTP servers can be used.

Click Next to proceed to the next screen.

The following LAN / WAN ports attribution step of the System wizard applies only for the Flexy 205.

The third screen of the System Wizard configures the attribution of the ports of the four ports

switch. Click on a port to change its attribution.

If no Ethernet extension card is detected then ports #2, #3, and #4 can be configured to be either

a LAN (local access) port or a WAN (Internet access) port. Port #1 will always remain a LAN port.

The attribution of a port can be easily recognized by its LED color:

• Orange for a WAN port.

• Green for a LAN port.

If an Ethernet extension card is detected, all four ports are set to LAN ports and are not

configurable.

Click Next to save the system settings.

If the attribution of the ports changed during the wizard, reboot the Flexy to apply the

changes.

4.2 Internet Wizard

The Internet Wizard configures the WAN or Internet settings for the Flexy. The options available

will depend on the specific hardware configuration of the Flexy.

The first screen selects the WAN interface that will be active.

Checking the <Initialize Configuration> checkbox will delete any existing WAN and VPN settings

already configured.

From the drop down menu, select the WAN interface to configure and activate.

Click Next to begin the WAN interface configuration.

Subsequent screens will differ depending on the WAN interface selected.

Below are the steps for connecting the Flexy to an Ethernet network. Information about

configuring other WAN interfaces is available in the General Reference Guide from the Related

Documents, p. 3.

Flexy Family User Guide User Manual UM-0002-00 1.4 en-US

Quick Launch Wizard 8 (34)

In the <Address Setup> section, select DHCP from the dropdown menu to have the Flexy receive

an address automatically from the network or Static and then enter the network address settings

manually.

If the network uses a proxy server and the Flexy will connect to Talk2M, check the <Connect to

Talk2M through Proxy> checkbox.

Click Next to proceed to the next screen.

Check the Enabled checkbox to make a test connection to the Internet. If this network uses a

proxy server or if port 80 is closed for outbound connections, leave this checkbox unchecked.

Click Next to apply the configuration changes.

If the wizard completes successfully, the Flexy is now connected to the local Ethernet network. If

the wizards fails, check with the local network administrator for any special connection

instructions.

4.3 VPN Wizard

The VPN Wizard configures the settings required to connect the Flexy with the Talk2M

infrastructure or an eFive network.

The first screen of the VPN Wizard selects the VPN network to use. Information for connecting to

an eFive network is available on www.ewon.biz/support.

To connect the Flexy to the Talk2M VPN infrastructure, click the T2M (Configure Talk2M

connectivity) button.

Before proceeding with the Talk2M wizard, the Flexy must first be defined in eCatcher.

Information about eCatcher and defining Ewon devices is available on .

On the next screen select the registration mechanism.

To register with an activation key, select Register with Activation Key and enter the appropriate

activation key.

To register with an Ewon Name, select Register with Ewon Name and enter the Talk2M account

name, the name of the Flexy on the account, and valid user credentials for this account.

Click Next to advance to the next screen.

If the network used for Internet access uses a proxy server, check the Enable checkbox in the

<Connect via HTTP Proxy> section and enter the appropriate connection information for the

proxy server.

Click Next to test and apply the Talk2M connection settings.

If the wizard completes successfully, the Flexy is properly configured for Remote Access through

Talk2M. If the wizard fails, the Diagnosis section will give additional troubleshooting information.

4.4 Gateway Wizard

If the hardware configuration of the Flexy includes certain extension cards that allow

communication with field devices over interfaces other than Ethernet, the Wizards might include

the Gateway Wizard.

The Gateway Wizard configures any necessary communication parameters for these cards. For

specific information about the hardware configuration of the Flexy, check the General Reference

Guide from the Related Documents, p. 3.

Flexy Family User Guide User Manual UM-0002-00 1.4 en-US

Inhaltsverzeichnis

Andere HMS Netzwerk-Hardware Handbücher

HMS

HMS Ixxat CAN@net NT 200 Bedienungsanleitung

HMS

HMS Anybus Wireless Bolt II Benutzerhandbuch

HMS

HMS Anybus Wireless Bolt Series Bedienungsanleitung

HMS

HMS Anybus Wireless Bridge II Benutzerhandbuch

HMS

HMS eWON Cosy 131 Bedienungsanleitung

HMS

HMS Anybus Wireless Bolt CAN SP2937 Benutzerhandbuch

HMS

HMS Anybus X-gateway Modbus-TCP Bedienungsanleitung

HMS

HMS FLB 3271 Bedienungsanleitung

HMS

HMS Anybus ABC4012 Benutzerhandbuch

HMS

HMS AnyBus-X AB7607 Bedienungsanleitung

HMS

HMS Anybus 021440 Bedienungsanleitung

HMS

HMS IXXAT CANnector Bridge Bedienungsanleitung

HMS

HMS Anybus Wireless Bolt Series Benutzerhandbuch

HMS

HMS Anybus Wireless Bridge II Benutzerhandbuch

HMS

HMS Anybus Wireless Bolt RJ45 PoE Bedienungsanleitung

HMS

HMS Anybus AB7665 Bedienungsanleitung

HMS

HMS Anybus Wireless Bridge II Bedienungsanleitung

HMS

HMS Anybus Wireless Bolt Serial Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung