Hollis LED6 Bedienungsanleitung
!"#$%%&'"()*+,-""""""".$/0"+)12+2,13*)"(45)25+,-"
1
LED6 (Mechanical Switch)
Diving Light System
Introduction
Thank you for choosing the Hollis LED6 (Mechanical Switch) Light System. To help
ensure its high performance and reliability, please take the time to review and understand
this manual.
This User’s Guide describes the unique functions and features of the Hollis LED6
(Mechanical Switch) Light System. The more acquainted that you become with your
new light, the more you will enjoy your diving experience. By following the instructions
in this guide, you will understand how your light works allowing the best use of its
features. It is very important to first read the entire contents of this manual before
attempting to use your new light.
All Hollis products are tested for function and water integrity before leaving the factory.
Hollis products are constructed with the highest quality materials and utilize the latest
computer aided design and manufacturing techniques to ensure their highest performance
and reliability.
!"#$%%&'"()*+,-""""""".$/0"+)12+2,13*)"(45)25+,-"
2
Technical Specifications
The LED6 (Mechanical Switch) light system offers the reliability, durability and
efficiency of LED technology in a small compact package.
Material: Aluminum 6061-T6
Surface finish: CNC machined and black anodize
Light source: Cree LED R2 with lifespan of 50,000 hours
CCT range: 5000k-7000k
Brightness: 360 Lumens
Output: 6 watts
Beam angle: 8 degrees
Battery type: 3 x C alkaline battery
Burntime: 6 hours
Switch type: Mechanical
Size: 1.81in(dia) X 8.66in(L) / 46mm(Dia) x 220mm(L)
Weight: 13.52oz / 0.38kg
Instruction for Use
The LED6 (Mechanical Switch) light system has a simple operating procedure. Once the
batteries are installed into the housing, secure the battery cap by turning the cap
clockwise until it stops – at this point the fully closed and water tight. The light will
activate by toggling the rear mechanical switch on/off.
CAUTION: Use out of water is not recommended as excessive heat may damage the
reflector and/or reduce the working life of the LED bulb.
!"#$%%&'"()*+,-""""""".$/0"+)12+2,13*)"(45)25+,-"
3
MANUFACTURER WARRANTY – 1 Year Limited (USA/Canada only)
Conditions may vary with your area, region, territory or country. For details, refer to the
Product Warranty section on the Hollis web site, or contact your local distributor.
www.HollisGear.com
SERVICE – Please refer to the following address for all service related issues with your
Hollis LED6 (Mechanical Switch) light system; or for immediate assistance call 510-729-
5110.
Hollis Customer Service
2002 Davis Street
San Leandro, Ca 94577
COPYRIGHT NOTICE
This user’s guide is copyrighted, all rights are reserved. It may not, in whole or in part,
be copied, photocopied, reproduced, translated, or reduced to any electronic medium or
machine readable format without prior consent in writing from Hollis.
LED6 (Mechanical Switch) Light System
©2010 Hollis
2002 Davis Street
San Leandro, CA USA 94577
TRADEMARK NOTICE
Hollis and the Hollis logo are registered or unregistered trademarks of Hollis. All rights
are reserved.
Inhaltsverzeichnis
Andere Hollis Tauchinstrument Handbücher
Hollis
Hollis Explorer Bedienungsanleitung
Hollis
Hollis DG03 Service-Handbuch
Hollis
Hollis DG03 Bedienungsanleitung
Hollis
Hollis DG05 Bedienungsanleitung
Hollis
Hollis LED-5 Handbuch
Hollis
Hollis DG02 Bedienungsanleitung
Hollis
Hollis LTS BCD Bedienungsanleitung
Hollis
Hollis Prism 2 Bedienungsanleitung
Hollis
Hollis HD200 BCD Bedienungsanleitung
Hollis
Hollis Prism 2 Bedienungsanleitung
Hollis
Hollis LTS Series Bedienungsanleitung
Hollis
Hollis Prism 2 Bedienungsanleitung
Hollis
Hollis Prism 2 Bedienungsanleitung
Hollis
Hollis TX1 He Bedienungsanleitung
Hollis
Hollis Explorer Bedienungsanleitung
Hollis
Hollis LX Wing Series Bedienungsanleitung
Hollis
Hollis Katana Sidemount Harness Bedienungsanleitung
