Homak Pro BK04072601 Bedienungsanleitung

UPPER TOOL CHESTS AND ROLLING TOOL CARTS

WITH BALL BEARING DRAWER GLIDES

CAUTION:

Read all instructions and safety tips before using this product.

MANUAL

UPPER TOOL CHESTS AND ROLLING TOOL CARTS

WITH BALL BEARING DRAWER GLIDES

UPPER CHEST MODELS:

Drawer Instructions:

• Top Lid must be unlocked and in the “up” position to allow the drawers to open.

• All drawers must be shut before closing the lid. Locking mechanism will not work correctly if top lid is already shut,

and forcing drawers shut while lid is in the closed position may damage the drawers and locking mechanism.

REMOVING AND INSTALLING DRAWERS:

• Empty drawer of its contents.

•Pull out the drawer all the way.

LEVER STYLE: Lift or lower the lever on both sides of the drawer, then pull drawer forward while

holding the levers.

TAB STYLE: Press the release tab on both sides an then pull out drawer while tabs are depressed.

• To reinstall drawer, line up slides and push drawer until it stops.

- 2 -

Left Drawer Release

MANUAL

Right Drawer Release

ROLLING CABINET MODELS:

Installing Casters:

• Our Roller Carts are supplied with 4 casters,

2 fixed and 2 swivel type casters. Use all

hardware supplied to attach the casters to the

rolling cart for stability.

• Be sure to install the swivel casters on the

same side as the side handle to ensure easier

maneuverability of the cart.

Handle Assembly:

• Attach Handle with the supplied hardware.

• Be sure to install the swivel casters on the

same side as the side handle to ensure easier

maneuverability of the cart.

- 3 -

INTERNALLY

WELDED

HARDWARE

CASTER

BOLT

SAFETY WARNINGS:

WARNING:

1) Evenly distribute tool weight among drawers. Never overload drawers.

2) Only use one drawer at a time to prevent tipping.

3) Do not pull or tow unit. Push unit by hand to move.

4) Maintain control of unit while moving.

5) Never use any drawer as a step.

6) Do not try to pull or push unit up or down grade at any time.

7) Wear safety glasses when working on this unit. Tool may slip causing personal injury.

8) On upper chests, make sure top lid is in locked position to prevent accidental closure and injury.

9) Close lid and/or lock drawers on unit while moving, to prevent them from opening during motion. Tipping of the

unit can occur.

10) Empty drawers before working on this unit, or installing or removing unit parts.

Learn more about tool chests and cabinets we have.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Homak Werkzeugaufbewahrung Handbücher

Homak

Homak BL02027052 Bedienungsanleitung

Homak

Homak SE Series Systemhandbuch

Homak

Homak RS PRO Series Systemhandbuch

Homak

Homak H2Pro Series Systemhandbuch

Homak

Homak RD06035247 Systemhandbuch

Homak

Homak BK02056071 Systemhandbuch

Homak

Homak PROFESSIONAL Series Systemhandbuch

Homak

Homak GS07003002 Systemhandbuch

Beliebte Werkzeugaufbewahrung Handbücher anderer Marken

Ryobi

Ryobi RWB03 Bedienungsanleitung

Husky

Husky H27CH5TR4BGK Bedienungsanleitung

Scheppach

Scheppach ts 2100 Bedienungsanleitung

Cornwell Tools

Cornwell Tools CTB360AKBK Bedienungsanleitung

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Bedienungsanleitung

Cassese

Cassese CS200 CART Bedienungsanleitung

Kendall Howard

Kendall Howard ESDW-9630-1000 Bedienungsanleitung

Lista

Lista Align Montageanleitung

Workzone

Workzone 99609 Bedienungsanleitung

Stanley

Stanley STST83800-1 Bedienungsanleitung

Perel

Perel ROLLER SHUTTER STORAGE CABINET Bedienungsanleitung

Husky

Husky H5CH2R Bedienungsanleitung

BGS technic

BGS technic 4107 Bedienungsanleitung

Clarke

Clarke CWB1250 Bedienungsanleitung

Ryobi

Ryobi RWB02 Bedienungsanleitung

Husky

Husky H52CH6HDV3WHT Bedienungsanleitung

Sealey

Sealey PTB66004 Bedienungsanleitung

General International

General International Excalibur 40-100 Stücklistenhandbuch