HOMCOM 853-020V70 Installationsanleitung

ASSEMBLY & INSTRUCTION MANUAL

INcsa005_UK

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

853-020V70

Easy to use

Plug on power supply, and the machine immediately starts heating process. When it heats

to specified temperature, press the steam button, and steam will be sprayed out slowly. So

the machine is easy to operate.

With complete cleaning accessories supplied, the machine can be assembled and disas-

sembled easily. It can be used to clean the doors, windows, floor boards, and thus is

applicable widely.

PRODUCT CHARACTERISTICS

1. Power Indicator

2. Power cord and plug

3. Steam button

4. Safety cap

5. Short spray nozzle

6. Extended connecting spray

7. Measuring cup

8. Long spray cup

9.Funnel

10.Spray cup with round brush

11. Bent spray cup

12.Towel sleeve

13.Spray cup for door/window 14. Brush plate

SAFETY PRECAUTIONS

This icon represents “Prohibition” This icon represents “Warning”

1. Cleaning and user maintenance shall not be made by children

without supervision.

2. To prevent electrical shock, do not immerse power cord or power

plug in water or other liquids.

3. The mains lead of this appliance is not replaceable by the user. If

the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

4. This product is for only use in households and must not be used

for industrial applications.

5. Do not turn on power supply until the tank is full of water.

6. Used power supply should comply with the product requirements

of the manufacturer.

7. During operation, the tank mouth must be plugged hermetically

and safety cap should be tightened in position.

8. A socket with special earthing wire must be used.

9. In use, the machine body must not be inclined at more than 45

degrees. Or otherwise boiling water will be sprayed out together

with team.

10. Do not direct the steam towards persons, animals or other

11. Before refilling water, ensure to unplug the power cord to

disconnect power supply. It is necessary to unplug the power cord

after the machine is used, before it is cleaned and while it is

repaired.

12. Do not add any rust remover, odor counteracting agent,

alcohol and detergent into the tank, which will possibly cause

damage to the tank.

13. Do not clean swimming pools

14. This appliance can be used by children aged from 8 years and

above and persons with reduced physical sensory or mental

capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a

safe way and understand the hazards involved. Children shall not

play with the appliance.

15. The liquid or steam must not be directed towards equipment

containing electrical components, such as the interior of ovens.

16. WARNING: Danger of scalding.

17. Important: never overfill the tank, or otherwise the steam

generation will be affected or too high steam pressure will be

caused.

18. The filling aperture must not be opened during use

Rating of power supply: AC 220-240V, 50/60Hz,

Tank capacity:350ml

Max capacity of water cup: 250ml

Rated power:900-1050W

Steam pressure:0.25MPa～0.32 Mpa

Injected steam capacity: 28g/min

Temperature controller: functioning temperature: 132℃; 　

fuser: functioning temperature:169℃

Overall dimension: 300×150×210mm

Operation Procedures

1.Unpack the product, check the accessories and documents supplied with the product

and make sure that the product and accessories are not damaged.

2.Before use, please read the User Manual carefully. The steam cleaner is only for use in

households.

3.First, place the steam cleaner on a level platform, push down the safety cover, unscrew

the safety cap counterclockwise, and then install the funnel. The safety cap can not be

opened if there is scope of the pressure in boiler to ensure safety for users.

4.Take 175ml clean water with the measuring cup, and add the water into the tank. (Max.

capacity of the tank is 250ml. Do not overfill the tank and some space must be left in the

tank). Re-install the safety cap and tighten it in position

5.Check the power supply and socket, and confirm they comply with the requirements

given in the User Manual. Then turn on the power supply.

6.About 4 minutes after power supply is turned on, steam is ready. At this time lightly press

the steam button and check whether steam is sprayed out of the nozzle. (Do not aim the

spray nozzle at other persons or objects).

7.If there is steam sprayed out, please install suitable accessories according to your needs

after you release the button.

8.Press down the steam button again in order to carry out the operations required by you.

Installation of Accessories

1.Install the spray cup with hairbrush

Hold the pipe section of the spray cup with hairbrush in your hand, align the arrow on the

spray cup with the single-line mark on short spray nozzle on the machine body, and insert

the spray cup in position. Rotate the spray cup in clockwise direction, and align the arrow

on the spray cup with the double-line mark on short spray nozzle on the machine body, as

shown in Figure 1. Fix the spray cup on the machine body. To remove the spray cup with

hairbrush, please rotate the spray cup inversely (counterclockwise) as shown in Figure 2,

and align the arrow on the spray cup with the single-line mark on the machine body. Then

the spray cup with hairbrush can be pulled out.

TECHNICAL SPECIFICATION

OPERATING INSTRUCTIONS

(I) (II)

2.Install spray cup with round brush or bent spray cup

For direct installation on short spray nozzle, aim the spray cup with round brush or bent

spray cup at the top of spray nozzle, as shown in Figure 3, and push the spray cup

upwards until it is in position. As the short spray nozzle and spray cup are positioned in six

directions, the angle and direction can be adjusted during the installation. Or, first install

long spray cup and then the spray cup with round brush or bent spray cup. The long spray

cup is installed in the same method as the installation of spray cup with hairbrush. The

spray cup with round brush or bent spray cup and long spray cup can be installed in the

same procedures as the installation on short spray nozzle.

3.Installation of spray cup for door/window

First install the spray cup with hairbrush on short spray nozzle

As shown in Figure 4 and Figure 5, install the two small hooks of the spray cup for

door/window onto suspension lugs of the spray cup with hairbrush, and then trigger the big

hook of the spray cup for door/window, and push the spray cup for door/window up and

clutch it onto the body of the spray cup with hairbrush.

(III)

(IV) (V)

Refill water during operation

1.Unplug the power cord and disconnect the power supply

2.Press down the steam button to release the pressure until no steam is injected out.

3.Slowly unscrew the safety cap but do not remove it, and residual steam will be

discharged slowly until no steam comes out. Then place the machine in a cool place to

cool it down for about five minutes. Finally, completely remove the safety cap.

4.Use the funnel and measuring cup to refill a suitable quantity of cold or hot water into the

tank.

5.Re-install the safety cap onto the machine body and tighten it in position.

After the machine is used

1.After the cleaning machine is used, unplug the power cord and disconnect the power

supply.

2.Press down the steam button to release the pressure until no steam is injected out.

3.Slowly unscrew the safety cap but do not remove it, and residual steam will be

discharged slowly until no steam comes out. Then place the machine in a cool place to

cool it down for about five minutes. Finally, completely remove the safety cap.

4.Empty the residual water in the tank and clean the external surface with a piece of dry

cloth.

5.At last, re-install the safety cap onto the machine body and tighten it in position.

Notes: Re-install the safety cap onto the machine body and tighten it in position.

DISPOSAL

This marking indicates that this product should not be disposed with

other household wastes throughout the EU. To prevent possible harm to

the environment or human health from uncontrolled waste disposal,

recycle it responsibly to promote the sustainable reuse of material

resources. To return your used device, please use the return and

collection systems or contact the retailer where the product was

purchased. They can take this product for environmentally safe

recycling.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HOMCOM Dampfreiniger Handbücher

HOMCOM

HOMCOM 853-027V70 Bedienungsanleitung

Beliebte Dampfreiniger Handbücher anderer Marken

Oreck

Oreck STEAM-IT STEAM100LRH Bedienungsanleitung

Beautural

Beautural YPZ-146 Bedienungsanleitung

MPM

MPM MZP-02 Bedienungsanleitung

Electrolux

Electrolux Refine 500 Bedienungsanleitung

Kärcher

Kärcher SC 3 Premium Bedienungsanleitung

Shark

Shark PRO Steam & Spray Bedienungs- und Wartungsanleitung

Jula

Jula 802-337 Bedienungsanleitung

Haan

Haan Floor Sanitizer MS-30 Bedienungsanleitung

Black & Decker

Black & Decker HSM13E1 Bedienungsanleitung

HOFFEN

HOFFEN GS-1231 Bedienungsanleitung

POLTI

POLTI VAPORETTO SYSTEME PRO Bedienungsanleitung

eta

eta AQUASIM PRO Bedienungsanleitung

Maxwell

Maxwell MW-3715 G Bedienungsanleitung

VAPamore

VAPamore Primo MR-100 Handbuch

Bestron

Bestron AZQ016 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO Steamtec 312 Bedienungsanleitung

Tempo di saldi

Tempo di saldi SPINSCRUBBER Bedienungsanleitung

DOMENA

DOMENA HYGIAFLOR Bedienungsanleitung