Home Accents Holiday TG76P3F28D03 Bedienungsanleitung

Pre-Assembly

Package Contents

Part Description Quantity

A Tree top 1

B Tree center, sticker 2 1

C Tree bottom, sticker 1 1

D Tree stand 1

Christmas Tree

Model: TG76P3F28D03

Sku # 1001 625 573

Tree top

Sticker 2

Sticker 1

Control box

Adapter

To Be Plugged

Into Wall

Outlet

Foot Pedal

on/off Switch

Assembling the tree stand

Assembly

Step 1.

Choose a location near a wall outlet.

Step 2.

Unfold the legs of the tree stand (D) and lay the stand on

the floor.

Step 3.

Slide the locking disk of the tree stand (D) down until it

snaps into place.

100S

70S

100S

80S

100S

50S

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

a. READ AND FOLLOW ALL

SAFETY INSTRUCTIONS.

When using electrical products, basic precautions should always

be followed, including the following:

b. Do not use seasonal products outdoors unless marked suitable for

indoor and outdoor use. When products are used in outdoor

applications, connect the product to a Ground Fault Circuit

Interrupting (GFCI) outlet. If one is not provided, contact a qualified

electrician for proper installation.

c. This seasonal product is not intended for permanent installation or use.

d. Do not mount or place the product near gas or electric heaters,

fireplaces, candles, or other similar sources of heat.

e. Do not secure the wiring of the product with staples or nails, or place

on sharp hooks or nails.

f. Do not let lamps rest on the supply cord or on any wire.

g. Unplug the product when leaving the house, when retiring for the

night, or if left unattended.

h. This is an electric product and not a toy! To avoid risk of fire, burns,

personal injury and electric shock it should not be played with or

placed where small children can reach it.

i. Do not use this product for other than its intended use.

j. Do not hang ornaments or other objects from cord, wire, or light string.

k. Do not close doors or windows on the product or extensions cords as

this may damage the wire insulation.

l. Do not cover the product with cloth, paper, or any materi al that is not

a part of the product when in use.

m. This product is equipped with push-in type lamps. Do not twist lamps.

n. Read and follow all instructions that are on the product or provide with

the product.

SAVE THESE INSTRUCTIONS

NEED HELP?

DO NOT RETURN TO STORE. Call: 1-877-527-0313

Form 8am to 5pm EST, Monday through Friday.

Align both arrows

in a straight line

before sliding

down to insert

Open the

cap cover

Do Not Tamper

Internal Parts

This tree assmebles with Quick Set

technology ---Set up and

light up your tree in less than 10 minutes!

Step 1.

Remove the protective caps from the tree bottom (C) and

insert the pole into the tree stand (D).

Step 2.

Remove the protective caps from the tree center (B) and

insert the pole into the tree bottom (C) .

Step 3.

Insert the tree top (A) into the tree center (B).

Step 4.

Shape the branches to your preference by working from the

bottom to the top. When adjusting branches, ensure that all

wires are free of branch hinges.

Step 5.

Inplug the adapter into the wall outlet. All your lights should

now be lit.

Step 6.

Shape the tree from the bottom to the top. Start with the

branches farthest from the pole – fan out in a star shape,

and continue until the entire tree is shaped.

Step 7.

When finished shaping the branches, slightly upsweep all

branch tips for a uniform look.

Assembling the tree

Top view Side view

Eye Bolt

Step 1.

Grasp the power adapter or power cord plug,

and than unplug from the power outlet.

Do not pull the power cord.

LAMP REPLACEMENT

Step 2.

Lift up lamp lock tab, then pull the

lamp and plastic lamp base

straight out of the lamp-holder.

Step 3.

Replace with a new spare lamp

provided with this product.

(Reference figure only)

DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL

This tree package includes hinge pins, washers and bulbs for any

replacement or repair that you need to perform on your tree. If

extra parts are needed, contact the Customer Service Team at

1-877-527-0313 between the hours of 8 am and 5 pm EST,

Monday through Friday.

Repairing Loose Hinges

Step 1. Place the branch into the slot of the bracket

Step 2. Insert a new hinge pin through the holes of the bracket

and secure with a washer.

Maintenance

Spare parts

Remote Control Instructions

Simply press the selector button to select from the following light functions:

(1) WARM WHITE - MULTI: FADING (2) WARM WHITE: FADING

(3) WARM WHITE - MULTI: ALTERNATING (4) WARM WHITE: STEADY

(5) WARM WHITE - MULTI: SLOW FADING (6) MULTI: STEADY

(7) MULTI: FADING (8) COMBINATION

Turning on the tree

NOTE: If some bulbs do not light or flicker, search for any loose

plugs and/or broken, loose, or missing bulbs. Replace bulbs

promptly with the replacement bulbs provided in order to

maintain the performance and life expectancy of your tree.

Step 1. Connect the light strings of the tree together and plug

the adapter into a wall outlet.

Step 2. If the tree comes with a foot pedal, step on the On/Off

button.

Operation

1. Before using or reusing, inspect product carefully. Discard any

products that have cut, damaged or frayed wire insulation or

cords, cracks in the lampholders or enclosures, loose

connections, or exposed copper wire.

2. Before disassembling the tree, unplug the tree and remove all

ornaments and decorations.

3. Gently lift the tree top straight up to remove from the center

section and fold all branches towards the pole.

4. Repeat this step for the center and bottom tree sections.

5. When storing the product, carefully remove the product from

wherever it is placed, including tree, branches, or bushes, to

avoid anyundue strain or stress on the product conductors,

connections, and wires. Cover the

protective cap on the poles to avoid

damaging the internal parts.

6. When not in use, store neatly in a cool,

dry location protected from sunlight.

Use and Care Instructions

1. Remove the insulation tab of the remote control.

2. Press either selector button and wait for a second to enjoy light

effects in the following sequence (see DUAL COLOR

LIGHT CONTROLLER & REMOTE CONTROL).

BATTERY REPLACEMENT

1. Loosen the screw of the battery cover with a screwdriver (not included).

2. Replace the used battery with a new CR2032 button cell battery

(not included). Make sure that the battery is installed with the

correct polarity (+ and -).

3. Retighten the screw to close and secure the battery cover.

WARNING

1. Dispose used battery properly. observe local regulations regarding

disposal of hazardous waste.

2. Ensure the batteries are installed correctly with regard to polarity (+ and -).

3. This product is powered by a lithium battery. Due to their small size,

lithium batteries can easily be swallowed by children. Ingestion of such

batteries has been known to cause death.

4. This product contains a lithium battery which if swallowed has been

known to cause death.

5. Do not expose light set to moisture.

6. Remove batteries when not used for an extended period of time, or

when depleted.

7. Clean the battery contacts prior to battery installation.

8. The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed.

9. Dispose of used batteries properly by following directions on batteries.

10. Use only CR2032 batteries for the remote controller.

11. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.

Christmas Tree

Model: TG76P3F28D03

Sku # 1001 625 573

Insulation Tab

Selector Button

Remote

Control

Light

Controller

Cover

Battery

CR2032

CAUTION:

Use only power adapter that was provided with this product.

Using a different power adapter will damage the lights and cause

fire, electrical shock hazard.

Troubleshooting

Problem Solution

The tree does not

light

Ensure that all tree sections are plugged into

each other and that the tree is plugged into

the wall. If your tree came with a foot pedal,

step on the On/Off button.

Check for loose, broken, or missing bulbs and replace

as needed with the replacement bulbs provided

To activate the DEMO mode:

1. With the tree plugged in, press and hold the FUNCTION button of

the in-line controller/receiver for 5 seconds.

2. The Clear Lights will blink 3 times. The tree is now in DEMO mode.

3. Within DEMO mode, the tree will display the COMBO pattern at all

time unless the function button is pressed to change the flashing

pattern. The tree will return to COMBO pattern whenever the

controller is idle for 30 seconds.

To deactivate the DEMO mode:

1. With the tree plugged in and in DEMO mode, press and hold the

FUNCTION button of the in-line controller/receiver for 5 seconds.

2. The multi-light will flash 5 time indicating that DEMO mode is off

(Clear lights will flash 5 times with single color LED trees).

3. The tree is now in normal mode. Flashing pattern can be set to

whichever desired and the tree will remember the last setting.

*IN-LINE CONTROLLER/RECEIVER

*Controller

Tree Comes with Demo Mode Not Activated

Christmas Tree

Model: TG76P3F28D03

Sku # 1001 625 573

Dieses Handbuch passt für folgende Modelle

Andere Home Accents Holiday Künstlicher Kiefernbaum Handbücher

Home Accents Holiday

Home Accents Holiday 22RT1742214 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG90M3AGTL04 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TV70M3ACDL10 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TY-S46-C Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG66M2ASPC00 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG90P4969L06 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday 22HD30002 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG66M3W89D16 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TY143-1614-1 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76P3D31D02 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG90M3BB7L00 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday 1003142996 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76M2X88L00 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday 1005 235 079 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76M5311L03 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG66M2Z29D03 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TV50M6196L00 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TY174-1711 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday 1001344018 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG90M3C03L05 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday 1001 539 383 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76P3945D02 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76M3BDSL01 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TG76M3ACDL19 Bedienungsanleitung

Beliebte Künstlicher Kiefernbaum Handbücher anderer Marken

Trim a Home

Trim a Home TY-S6-250L Bedienungsanleitung

Polygroup

Polygroup TG7600NVQC03 Bedienungsanleitung

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Bedienungsanleitung

Polygroup

Polygroup TG76M3S45C02 Bedienungsanleitung

Polygroup

Polygroup TG90P3693L00 Bedienungsanleitung

Costway

Costway CM23595US Bedienungsanleitung

Polygroup

Polygroup TV46M3ADVC05 Bedienungsanleitung

Polygroup

Polygroup TV46P7001X00 Bedienungsanleitung

Holiday Living

Holiday Living TV40EH339C01 Bedienungsanleitung

Polygroup

Polygroup TGC000NY1C00 Bedienungsanleitung

CASARIA

CASARIA DBGB001 Bedienungsanleitung

Alpine

Alpine CRD100L-WT Bedienungsanleitung

CASARIA

CASARIA 104006 Bedienungsanleitung

Polygroup

Polygroup TG70P3D94D00 Bedienungsanleitung

Alpine

Alpine CRD111S-GN Bedienungsanleitung

Polygroup

Polygroup TG66M3545X01 Bedienungsanleitung

Polygroup

Polygroup TG90P3499C07 Bedienungsanleitung

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Bedienungsanleitung