HoMedics BPS-420 Bedienungsanleitung

Inst uction Manual

BPS-420-0 B

Manual nflate

Blood Pressure Monitor

TABLE OF CONTENTS

INTRODUCTORY INFORMATION:

mportant Safeguards ...................................................................4

About Blood Pressure...................................................................5

What is Blood Pressure?

Why Measure Your Blood Pressure?

Blood Pressure Standard .............................................................6

How This Blood Pressure Monitor Works ....................................7

USAGE INFORMATION:

Name/Function of Each Part ........................................................8

Display Explanations ....................................................................9

nstalling Batteries.......................................................................11

Date & Time Set Procedure........................................................12

Using The Arm Cuff ....................................................................13

Measurement Procedure ............................................................16

Risk Category ndicator ..............................................................18

Recalling Values from Memory...................................................19

Clearing Values from Memory ....................................................19

mportant Notes Regarding Your

Blood Pressure Measurement ....................................................20

Recalibration Service ..................................................................20

Care, Maintenance & Cleaning ..................................................21

Troubleshooting ..........................................................................22

Specifications..............................................................................23

3 Year Guarantee ........................................................................24

READ ALL NSTRUCT ONS BEFORE USE.

SAVE THESE NSTRUCT ONS FOR FUTURE REFERENCE.

IMPORTANT SAFE UARDS:

WHEN US NG YOUR BLOOD PRESSURE MON TOR, BAS C

PRECAUT ONS SHOULD ALWAYS BE FOLLOWED.

• Please note that this is a home healthcare product only and it is not intended to

serve as a substitute for the advice of a P or medical professional.

• Do not use this device for diagnosis or treatment of any health problem or

disease. Measurement results are for reference only. Consult a healthcare

professional for interpretation of pressure measurements. Contact your P if you

have or suspect any medical problem. Do not change your medications without

the advice of your P or healthcare professional.

• Proper cuff size is critical for accurate measurements. Follow the instructions in

this manual and printed on the arm cuff to ensure the appropriate size of cuff is

being used.

• This product is not suitable for people with arrythmias. This device may have

difficulty determining the proper blood pressure for individuals with diabetes, poor

circulation of blood, kidney problems or for users who have suffered from a stroke.

• The pulse display is not suitable for checking the frequency of heart pacemakers.

• Electromagnetic interference: The device contains sensitive electronic

components. Avoid strong electrical or electromagnetic fields in the direct

vicinity of the device (e.g. mobile telephones, microwave ovens). These may

lead to temporary impairment of measurement accuracy.

• Use blood pressure monitor only for its intended use.

• Do not wrap the cuff around body parts other than your arm.

• This unit is intended for use in measuring the blood pressure and pulse rate of

adults. Do not use this device on infants or those who cannot express their own

consent. This unit should not be operated by children.

Blood pressure measurements determined with this device are equivalent to those

obtained by a trained observer using the cuff/stethoscope ausculatory method,

within the standard guidelines.

ABOUT BLOOD PRESSURE:

What is Blood ressure?

Blood pressure is the pressure exerted on the artery walls while blood flows

through the arteries. The pressure measured when the heart contracts and sends

blood out of the heart is systolic (highest) blood pressure. The pressure measured

when the heart dilates with blood flowing back into the heart is called diastolic

(lowest) blood pressure.

Why Measure Your Blood ressure?

Among today’s various health problems, those associated with high blood

pressure are very common. High blood pressure dangerously correlates with

cardiovascular diseases. Therefore, blood pressure monitoring is important for

identifying those at risk.

Systolic (mmHg) Diastolic (mmHg)

Stage 2 Hypertension >160 >100

Stage 1 Hypertension 140~159 90~99

Prehypertension 120~139 80~89

Normal <120 <80

For adults 18 and older who are not on medicine for high blood pressure, are not having a short-term

serious illness, and do not have other conditions, such as diabetes and kidney disease.

To determine category of risk when systolic and diastolic readings fall into two areas, use the

higher of the two numbers for classification.

There is an exception to the above definition of high blood pressure for people with diabetes

and chronic kidney disease. A blood pressure of 130/80 mmHg or higher is considered high

blood pressure for those individuals.

This monitor comes equipped with a Risk Category Indicator to visually indicate the

assumed risk level of each reading based upon these standards. See page 18 for

more information on this feature.

It is important that you consult your doctor regularly, as your doctor will be able to

tell you your normal blood pressure range as well as the point at which you will be

considered at risk. For reliable monitoring and reference of blood pressure,

keeping long-term records is recommended.

6 7

HOW THIS BLOOD PRESSURE MONITOR WORKS

This manual inflate digital blood pressure monitor provides systolic pressure,

diastolic pressure and pulse readings quickly and easily. Once the cuff is inflated,

the monitor will determine your blood pressures by analysis of your pressure

oscillations. When the measurement is completed, the device will deflate the cuff

and display your systolic pressure, diastolic pressure and pulse readings.

Based upon your measurement results, the monitor's Risk Category Indicator will

alert you if your reading falls into the pre-hypertension, stage 1 hypertension, or

stage 2 hypertension risk categories. See page 18 for more information on the Risk

Category Indicator.

BLOOD PRESSURE STANDARD - JNC7:

This is a blood pressure standard that identifies areas of low- and high-risk blood

pressure. This standard, however, is a general guideline as blood pressure varies

among different people, age groups, etc.

Categories for Blood ressure Levels in Adults

Display Explanations

Systolic

Pressure

Diastolic

Pressure

Date/Time Indicator

Pulse Rate

LCD

Display

Battery

Cover

(Located

on bottom

of unit)

Memory Recall Button

START/STOP Button

Cuff Tube

Date/Time

Set Buttons

(Located on back of unit)

Arm Cuff

Inflation Bulb

Name/Function of Each art

Replace the batteries if:

1. The low battery symbol appears on the display.

2. Nothing appears on the display when the power is switched on.

As the supplied batteries are for test only, they may be discharged earlier than

batteries you buy in stores. Replace the batteries in pairs. Remove batteries when

unit is not in use for extended periods of time.

NOTE: Batteries are hazardous waste. Do not dispose of them together with the

household garbage.

Battery

Cover

Installing Batteries

1. Press down on latch and lift the battery cover towards you to open the

battery compartment.

2. Install or replace 2 “AA” sized batteries in the battery compartment according to

the indications inside the compartment.

3. Replace the battery cover by clicking in the bottom hooks first, then push in the

top end of the battery door.

Inflation Symbol: Appears when cuff requires inflation.

Deflation Symbol: Appears when cuff is deflating.

Weak Battery Symbol: Appears when batteries should be replaced.

ulse Symbol: Shows the pulse rate per minute.

Risk Category Indicator: Compares readings against blood pressure

guidelines set by the JNC7 standard. See page 18 for more information.

If any of the following letters and numbers appear in the area that diastolic

pressure should be displayed, an error has occurred with your reading. See

Troubleshooting section of this manual for more information.

Measurement Error: Measure again. Wrap the cuff

correctly and keep arm steady during measurement.

Air Circuit Abnormality: Check cuff connection. Measure again.

ressure Exceeding 300 mmHg: Turn the unit off to clear, then

measure again.

Data Error: Remove and reload the batteries.

Recalibration Alert: Recalibration recommended.

See page 20 for information.

Display Symbols

ARROWMUSTFALL

WITHINYELLOWBAND

ARROW MUST FALL

WITHIN YELLOW BAND

9.5–14.2Inches

24–36Centimeters

Standard

Size Cuff Fits:

Center tube over

middle of arm

MODEL# PP-BPCUFF5

Positioncuff

edge0.6˝

–

1.0˝

(1.5

–

2.5cm) aboveelbow.

Centertubeover

middleofarm.

Fitcuffsecurely.Allowroom for

twofingerstofitbetweenthecuff

andyour arm.

Solid Colored Line

Colored Arrow

Using the Arm Cuff

Very Important: roper cuff size is critical to accurate measurement.

This monitor comes with a Standard Size arm cuff that fits arms with

circumferences of 24 cm – 36 cm (9.5”–14.2”).

This cuff is suitable for your use if the colored arrow falls within the solid

color line as shown below.

If the Arrow falls outside of the Solid Color Line, you need a cuff with another

circumference. Contact HoMedics Consumer Relations on tel: +44 (0) 1732 378557

or email: cservice@homedics.co.uk.

ress the button

Blinking date

Increasing date

Confirm the entry

Repeat process to set month and time

Date & Time Set rocedure

1. To adjust the date/time, press the Set button , located on the back of

the monitor.

2. The display will show a blinking number showing the date. Change the date

by pressing the button. Each press will increase the number by one

in a cycling manner. Press the Set button again to confirm the entry, and

the screen will show a blinking number representing the month.

3. Change the month and time as described in Step 2 above, using the

button to change the numbers and the Set button to confirm the entries.

4. A “0” will reappear as the blood pressure monitor is ready for

measurement again.

5. Position cuff edge 1.5-2.5 cm (0.6-1.0 inches)

above elbow.

6. Center tube over middle of arm.

7. Pull the end of the cuff so that it tightens evenly

around your arm. Press the hook and loop material

together to secure. Allow room for 2 fingers to fit

between the cuff and your arm.

8. Lay your arm on a table (palm upward) so the

cuff is at the same height as your heart.

Make sure the tube is not kinked.

ARROWMUSTFALL

WITHINYELLOWBAND

D-ring

End of cuff

Felt Material on the

outside of cuff

2. Plug the cuff tube into the left side of the unit.

Center tubeover

middle ofarm.

Insert plug here

3. Open the arm cuff so that your arm may be placed through it.

4. Remove tight fitting clothing from around your upper left arm.

1. If the cuff is not assembled, pass the end of the cuff furthest away from the

tubing through the metal D-ring in order to form a loop. The smooth side

without the felt material should be on the inside of the cuff loop.

START

STOP

1. With the cuff wrapped around your arm, press the START/STO button.

Do not inflate the cuff unless it is wrapped around your arm. All digits will light

up to check the display functions. The checking procedure will be completed

after about 2 seconds. The arrow will appear momentarily and then the

display will show a “0”. The monitor is “Ready to Measure” at this point.

2. Using the hand of the arm that does not have the cuff on it (this will be your right

hand if wearing the cuff on your left arm), squeeze the inflation bulb and

continue pumping until the pressure reading on the display reaches 170 mmHg.

The cuff will then begin slowly deflating as part of the measurement process.

If the pressure in the cuff is not enough, an upward arrow ( ) will appear,

directing you to continue pumping. It is recommended that you pump until the

pressure reading on the display reaches 200 mmHg.

3. When the measurement is completed, the cuff will deflate

entirely. Systolic pressure, diastolic pressure and pulse will

be shown simultaneously on the LCD screen.

The measurement is then automatically stored

into memory.

NOTE:

1. This monitor automatically turns off approximately 1 minute after last operation.

You may also press the START/STO button to turn the unit off.

2. To interrupt the measurement, you may press the START/STO

(recommended), “MEM”, or Date/Time Set buttons. The cuff will deflate

immediately after a button is pressed.

Main Artery

NOTE:

If it is not possible to fit the cuff to your

left arm, it can also be placed on your

right arm. However, all measurements

should be made using the same arm.

To use on the right arm, you must

position the artery symbol “ ” over the

main artery. Locate the main artery by

pressing with two fingers approximately

2 cm (1") above the bend of your elbow on the inside of your right arm.

Identify where the pulse can be felt the strongest. This is your main artery.

MEASUREMENT PROCEDURE

Important Notes:

• Blood pressure changes with every heartbeat and is in constant fluctuation

throughout the day.

• Blood pressure measurement can be affected by the position of the user, his or

her physiologic condition and other factors. For greatest accuracy, wait 1 hour

after exercising, bathing, eating, drinking

beverages with alcohol or caffeine, or smoking

to measure blood pressure.

• Before measurement, it is suggested that you sit quietly for 15 minutes as

measurements taken

during a relaxed state will have greater accuracy. You should not be physically

tired or exhausted while taking a measurement.

• During the measurement, do not talk or move your arm or hand muscles.

• See page 20 for additional notes regarding your blood pressure measurement.

MEM

Recalling Values From Memory

1. Press the “MEM” button to access the memory.

2. The monitor will first display the calculated

average applied to the last 3 memories.

3. Every new press of the “MEM” button will

recall a previous reading.

The latest reading will be recalled first.

Clearing Values From Memory

Press and hold the

“MEM” button for

approximately 5 seconds,

then the data will be

erased automatically.

(No Symbol)

Risk Category Indicator

This unit conforms to the JNC7 blood pressure standard, classifying blood

pressure ranges into 4 stages. This unit is equipped with an innovative blood

pressure classification indicator, which visually indicates the assumed risk level

(normal, prehypertension, stage 1 hypertension, or stage 2 hypertension)

of each reading. Symbols are described below and classifications follow the

standard guidelines as described earlier in this manual (page 5).

Inhaltsverzeichnis

Andere HoMedics Blutdruckmessgerät Handbücher

HoMedics

HoMedics BPA-260-CBL Bedienungsanleitung

HoMedics

HoMedics BPW-200-0 TheraP Bedienungsanleitung

HoMedics

HoMedics BPA-110 Bedienungsanleitung

HoMedics

HoMedics BPW-715 Bedienungsanleitung

HoMedics

HoMedics BPA-040 Bedienungsanleitung

HoMedics

HoMedics BPA-060 Bedienungsanleitung

HoMedics

HoMedics BPA-2000-EU Bedienungsanleitung

HoMedics

HoMedics BPW-101 Bedienungsanleitung

HoMedics

HoMedics BPW-370BT Bedienungsanleitung

HoMedics

HoMedics BPS-060 Bedienungsanleitung

HoMedics

HoMedics Thera P BPA-200 Bedienungsanleitung

HoMedics

HoMedics BPW-060-CA Bedienungsanleitung

HoMedics

HoMedics BPW-930BT Bedienungsanleitung

HoMedics

HoMedics BPA-150 Bedienungsanleitung

HoMedics

HoMedics BPW-1000-EU Bedienungsanleitung

HoMedics

HoMedics BPW-201 Ver. B Bedienungsanleitung

HoMedics

HoMedics LEADER LDRBPS-060 Bedienungsanleitung

HoMedics

HoMedics BPA-960BT Bedienungsanleitung

HoMedics

HoMedics BPA-201 Bedienungsanleitung

HoMedics

HoMedics BPA-3000-EU Bedienungsanleitung

HoMedics

HoMedics Walgreens BPA-430WGN Bedienungsanleitung

HoMedics

HoMedics BPA-200-EU Bedienungsanleitung

HoMedics

HoMedics BPW-360BTPU Bedienungsanleitung

HoMedics

HoMedics Walgreens 518728 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung