Homing Crazy Drill Master Bedienungsanleitung

HomingGame Crazy Drill Master Game Machine Manual/www.hominggame.com

Crazy Drill Master

Manual

（d2.0）

1.Matters need attention………………2

2.Specification …………………………2

3.Accessories…………………………………2

4.How to play……………………………………2

5.Mother board’s function…………………3

6.Account checking…………………………4

7.Adjusting and Testing………………………5

8.Winning probability setting ………………7

9.Trouble Shooting……………………………12

Notice: In order to guarantee the safety, please read the

following terms carefully.

1.Matters that need attention

Matters need attention in Installation

1) Installing or removing this product, please contact the relevant technical personnel first.

2) The product is applied indoors, avoiding wet places.

3) The product should not be installed in the below places:

Places that are wet or leaking

Places such as greenhouse facilities and high Humidity.

Places with the floor tilt, uneven or vibration.

4) Be in AC220V, with the wire holed greater than 10A

5) Please don’t place the outlet on the floor otherwise it may lead to an accident.

6) Please don't use the outlet with many pins, it may lead to fire hazards or electric shock.

Use caution:

1) Be sure to turn off the power when verifying and serving. Please don't use water to clear up the

machine inside directly, otherwise it may happen to leak and cause by mislead actions, and lead to a

fire hazard or an electric shock.

2) All consumables should meet specifications.

3) To prohibit the action of resolving and altering this product, it may cause to a fault. Our company

is not responsible for such cases.

4) In order to improve the quality, it is possible we may update solfware or change the specification

without prior notice

2. Specifications

Exterior Appearance………………………D100*W105*H182（cm）

Weight…………………………………………About 200KG

Voltage…………………………………………AC220V

Power………………………………………About150W

Implement……………………………………Token

Coin Box Capacity……………………………………About 5000 coins

3.Accessory

Instruction Book………………………………………… 1 piece

Micro switch ..............………………………………. 2 piece

Wire……………………………………………………….1piece

4.How to play

1.Insert coin

2.Control the left-right movement of the drill by joystick

3.Press “Up”button,aim the gift hole then release.

4.If the drill goes in and rotate,then get the prize

5.Illustration of main-board's function

1、LED 1: mode 1 (as the pic shown above)

2、LED 2: mode 2 (as the pic shown above)

3、LED 3: mode 3 (as the pic shown above)

4、LED 4: mode 4 (as the pic shown above)

5、LED 5: mode 5 (as the pic shown above)

6、LED 6: mode 6 (as the pic shown above)

7、LED 7: mode 7 (as the pic shown above)

8、MODE button, the button to change mode

LED1——LED8

9、UP: the button to select

10、DOWN: the button to select

11、ENTER: the button to make a confirmation.

12、CLEAR: the button to delete all data

13、TEST: the button to test

6.Account Checking

The way to enter amount accounting checking:Pressing “MODE” button to light up the LED 1,Means

Total accounting.as below:

Pressing “MODE” button to light up the LED 2，means Total total gift payout.As below:

Way of Unclear total account checking:Input the pass code under Mode 8.

Pressing “MODE” button to light up the LED 8.Pressing “ENTER”button,Input the pass code.(Factory

setting 0003)

Pressing “ENTER”button,LED 8 and LED 1 light up together,show the Unclear Total account.

Pressing “TEST”button,LED 8 and LED 2 light up together,show the Unclear prizes payout account.

7.Adjusting and Testing

(1)Setting credit of every game/how many coins per game.

Press “MODE” button to light up the LED 3, The digital show 3A--X，You can Adjust credits per

play.Adjust the credit from 1 (Minimum) to 5 (Maximum) by pressing “Up” or “Down” Button

(2)Setting time per play.

Enter mode 4 method：press button“MODE”till LED4 bright and get into mode 4.

Display 4A--XX，use“UP”、“ DOWN”key to adjust game time

range from 20-60 sec. As picture,

Press“TEST”key then display 4B ---X to setup demonstrate music，

Use“UP”、“ DOW”key to adjust，0 means no music. 1 means

1 minute play 1 demonstrate music. 2 means 2 minutes play 1 demonstrate music. 3 means 3

minutes play 1 demonstrate music. 4 means 4 minutes play 1 demonstrate music. 5 means 5

minutes play 1 demonstrate music. 6 means keep playing music. As picture,

Change game music and demonstrate music method.

USB connected：Change game music and demonstrate music method: Press “CLEAR”button 3 sec

under setup demonstrate music mode, tube glint and copy music to main board from USB.

SD connected：Press “ENTER”key 3 seconds, when tube glint and it will copy music to main board

from SD card.

(Note: Audio format is MP3，96K frequency can save 360 second music)

Music arrangement mode：Setup a new folder on computer for copying music. Edit music name such as：

0001，0002，0003，0004......etc.(First half is demonstrate music 0001,0002. Next half is game music

0003，0004) then select arrangement mode to headline arrangement. Copy all music to USB.

3）Setup coordinate

Enter setup mode 5. Enter mode 5 method ：Press button “MODE ”till LED5 bright,

then get into mode 5.As picture

Under mode 5，press "ENTER" button。Machine will find coordinate automatically.

2.Machine will find coordinate automatically.，When the digital show1FXXXX mean the Y (up and down

position).Using “UP”和“DOWN” adjust the up and down position and Press “ENTER”drill push and

save the data. Check the drill go in or not,if not go in,adjust again.When LED light then save the

position.

3.If X(left and right)position not right,Press”CLEAR”Button，drill push out and save data.Check the

drill go in or not,if not go in,adjust again.When LED glint then save the position.

4.Press the “TEST”go to next slot.The drill come back original point after finish all slot.

（4）Confirm origin test mode:

Enter mode 6 method：Press button“MODE”till LED6 bright then get into mode 6.As picture,

1、Press“ENTER”button under mode6，test each box position

（If can’t get into it, back to mode 5 and keep adjusting）

2、Press“TEST”button under mode 6，test motion （test each switch and rod’s pushing）.

3、Under mode 6，press “UP”button will increase 10 tokens，press“CLEAR”one time will clear tokens.

If press“CLEAR”button more than 10 seconds，LED light and Nixie tube will shut down, at the same

time total tokens and total gifts give up will clear.

4、Under mode 6，press“DOWN”button more than 10 sec，LED light and Nixie tube will shut down, at the

same time will clear blocked token number.

8.Setting Probability

（1）Setup under mode 7，Enter mode 7 method：Press“MODE”button till LED7 bright then get

into mode7. As picture,

Setup probability：under mode 7，Nixie tube display1F0005，

1F means the 1st gift’s probability ，5 represent setting number（it means use 5 tokens can

win 1 gift in first line）， use“UP”or“DOWN”button to adjust probability，use“ENTER”

button to setup next line.（According to machine’s gift box, there is a corresponding number）

Display

Item

Range

Origin

setting

Explain

1st gift probability

0-5000