Honeywell CL802PE Bedienungsanleitung

Portable Evaporative Air Cooler

User Manual

Read and save these instructions before use

Model: CL802PE / CO802PE

www.honeywellhomecomfort.com

E-mail: info@honeywellhomecomfort.com

CASTER WHEEL COVER INSTALLATION

Caster wheel with brake

Figure 2. Bottom View

LB - Left Back Side, RB - Right Back Side, LF - Left Front Side, RF - Right Front Side

Figure 1.

Location of caster wheels after installing caster wheel covers.

Caster wheels

Front

Back

Installation kits included:

1. Body

(caster wheels are pre-installed

without caster wheel covers)

X 1 4. Caster Wheel Covers X 4

2. Caster Wheels

(without lock)

X 2 5. Screws X 32

3. Caster Wheels

(with lock)

X 2

2 3 4

x32

x4x2 x2

CASTER WHEEL COVER INSTALLATION

Step 6:

Tighten the 4 screws on each caster wheel

Step 4:

Tighten the 4 screws on each caster wheel

Step 2:

Install the caster cover with caster wheel

Step 5:

Assemble the 2 caster wheels (with lock)

with LB & RB caster bracket

Step 3:

Assemble the 2 caster wheels (without

lock) with LF & RF caster bracket

Step 1:

Unscrew all 4 caster wheels

PARTS DESCRIPTION

1) Control Panel 9) Rear Grill Screws

2) Lever for Horizontal Louvers 10) Rear Grill

3) Louvers 11) Water Tank

4) Water Fill Door 12) Power Cord & Plug

5) Left Side Grill 13) Water Inlet Valve

6) Front Grill 14) Honeycomb Cooling Media

7) Water Level Indicator 15) Drain Plug

8) Casters

WARNING: FOR OUTDOOR MODEL CO802PE, USE ONLY ON GFCI PROTECTED RECEPTACLES.

WARNING -- READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER

MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY

DAMAGE AND/ OR IMPAIR ITS OPERATION AND VOID THE WARRANTY. IN CASE THERE IS

ANY INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER

LANGUAGE VERSION OF THE CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL

PREVAIL.

POWER TIMER

0.5

POWER

COOL

SPEED

SLEEP

USE & OPERATION

CONTROL PANEL

FUNCTION BUTTONS

POWER

Press the POWER button to turn the unit on. The cooler will start automatically at medium speed. After

a few seconds the speed will switch to low. To turn the unit off, press the button again.

SPEED

Press the SPEED button repeatedly to change the speed between High (H) - Mid (M) - Low (L) -

Sleep (SLEEP). When the Sleep mode is selected, the fan will randomly change between High, Medium,

Low and off (5 seconds each) to mimic a natural breeze.

TIMER

Press the TIMER button until the desired time duration setting is selected. When the set time

has passed, the unit will automatically turn off (unit remains in Standby mode until power cord is

unplugged from electrical socket). The TIMER function allows you to program the unit for up to 7.5

hours of use.

SWING

Press the SWING button until the SWING indicator light is illuminated on the

control panel. The louvers will begin to move left to right automatically.

Vertical Air Flow - You can manually adjust the louvers to change vertical air ﬂow.

Louver

Movement

COOL

Press the COOL button until the COOL indicator light is illuminated on the control panel. This activates

evaporative cooling. The water pump will operate and you will feel the cooler air after the Honeycomb

Cooling Media is completely wet. When the COOL indicator light is switched OFF, the unit can still

function in a fan only mode (without evaporative cooling).

USE & OPERATION (CONTINUED)

Make sure to position the air cooler correctly before you set up and start using the product. Please

refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide.

COOLER LOCATION

REMOTE CONTROL

NOTE:

MODE

SPEED

TIME

WING

ON/OFF

•

The remote control requires AAA (2 x 1.5V) batteries for replacement.

Open the battery compartment at the back of the remote control and insert the batteries

inside. Care must be taken to insert the batteries according to the correct polarity (+ / –)

markings shown inside the battery compartment.

Always point the remote control signal transmitter towards the unit when operating. Make sure

that the signal path is not obstructed.

Remove the batteries if the unit is not going to be used for an extended period of time.

Do not drop the remote control.

Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.

Do not mix old and new batteries.

Do not recharge the battery.

Exhausted batteries are to be removed from the product and safely disposed of as per local

regulations.

Do not dispose of batteries in ﬁre. Batteries may explode or leak.

WARNING: Caution for ingestion of the small battery. Keep away from children and animals.

POWER :

ON / OFF

Low / Medium / High / Sleep

Evaporative Cooling On / Off

Controls the motion of the louvers

Controls the Timer function for automatic off

SPEED

MODE

TIMER

SWING

Locate the male connector at one end of the garden hose.

Insert the garden hose connector into the water inlet valve of

the cooler. Screw and tighten the water inlet valve onto the

threaded part of the garden hose connector, making sure the

hose connector is secured to ensure there will be no leaks. If

there is leakage, the hose and the water inlet valve may not be

connected properly. Try to disconnect, replace and tighten the

water inlet valve again.

When the connection is secured, turn ON the water supply and

the water will ﬂow into the water tank of the cooler.

The cooler is now set so the water refills automatically when

the water tank is empty, or when the water reaches below a

minimum level.

When the water tank is full, the water inlet valve will

automatically.

Please open the water valve for minimum ﬂow as too

much pressure could damage the inlet pressure control system.

WARNING: The maximum water inlet pressure is 0.5 MPa.

USE & OPERATION (CONTINUED)

It is ideal to use the Continuous Water Supply Connection to run the unit for long periods of time

without refilling the tank. This also helps prevent pump failure in case the cooler is running with

inadequate water in the tank.

CAUTION: Unplug the unit from the electrical power outlet before ﬁlling or emptying the water tank.

Continuous Water Supply Connection:

For a continuous water supply, you will need a garden hose that is connected to a main water supply.

Note: The garden hose is not included. Please make use of a garden hose which is compatible with

the unit connection.

Manual Water Tank Reﬁll:

FILLING WITH WATER

•

Using a portable container or a garden hose, you can reﬁll the water tank manually by pouring

water into the water tank through the water inlet hole located at the top of the air cooler.

Check the water level indicator to know when the water tank is full. Do not ﬁll water above the

"Max." water level mark to avoid water droplets collecting on the louvers.

WARNING: Always ensure the water in the water tank is above the minimum (Min.) water level mark

for both Continuous & Manual Water Reﬁll. Running the unit in Cool mode with inadequate water

may cause pump failure.

Water Fill

Door

Water Inlet Hole

Garden Hose

Water inlet value

USE & OPERATION (CONTINUED)

LOW WATER ALARM*

The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the

minimum level, you will hear a beeping sound and the indicator light will ﬂash continuously. The unit

will automatically pause evaporative cooling.

Reﬁll the water tank to deactivate the alarm in cooling mode. First switch OFF the unit and unplug

from the power outlet. Fill the water tank with water above the minimum water level mark. Plug in and

switch ON again.

To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch the

unit OFF and then ON again. The Low Water Alarm will not activate in Fan only mode. The Low Water

Alarm will sound again if the COOL function is activated while the water tank is still empty.

*Applicable for models with Low Water Alarm feature only.

Note: The water capacity refers to the total volume of water that can be contained within the air

cooler water tank and water distribution system. The water capacity in the tank at the “Max.” indicator

level may be lower than the actual water capacity of the air cooler.

WARNING: Do not ﬁll water tank with dirty water or salt water. This can damage the unit and Honeycomb

media.

FILLING WITH WATER (CONTINUED)

USE & OPERATION (CONTINUED)

If the cooler will not be used for a long period of time, please refer to the STORAGE & MAINTENANCE

GUIDELINES located in the separate Safety & Maintenance Guide.

CLEANING & DRAINING THE WATER TANK

WARNING:

Before cleaning the unit, switch the unit OFF and disconnect from the power outlet.

•

Move the unit to a location where the water can be drained. Remove the cap from the Drain plug

located at the bottom of the unit. Allow the tank to empty.

Reﬁll the water tank with clean water, up to the maximum level and drain it completely.

Use a damp cloth to remove the dirt and dust from the surface of the unit. Never use corrosive

elements or chemicals to clean this product.

When the product is not in use, store the unit in a dry place out of direct sunlight.

CLEANING THE HONEYCOMB COOLING MEDIA

The appliance is supplied with three Honeycomb Cooling Media pads.

The Honeycomb Cooling Media are located inside the Rear and Side Grills. Follow Steps 1 to 5 for

instructions on how to remove them from the unit for cleaning and maintenance.

Do not run the unit in COOL mode with stale water in the tank. You must empty the water tank

and reﬁll with fresh water, especially if the tank has not been cleaned in a long time.

The cleaning frequency for the Honeycomb media depends on local air and water conditions.

In areas where the mineral content of water is high, mineral deposits may build up on the

Honeycomb Cooling Media and restrict air ﬂow. Draining the water tank and reﬁlling with fresh

water at least once a week will help reduce mineral deposits. If mineral deposits remain on the

Honeycomb Cooling Media, the media should be removed and washed under fresh water. The

media should be cleaned every two months or sooner, depending on your needs.

For best results allow the Honeycomb Cooling Media to dry after each use by turning off the cool

function 15 minutes before turning the unit off.

•

USE & OPERATION (CONTINUED)

Remove the screws from the Rear Grill of the Air Cooler.

Carefully pull out the Rear Grill from the Air Cooler.

The Honeycomb Cooling Pad is secured on the Rear Grill by two Horizontal Bars that are ﬁxed in

place by two screws on the Left and Right Sides of these Horizontal Bars. Remove these screws

to release the Horizontal Bars.

Pull out the Honeycomb Cooling Pad by sliding it out from the Rear Grill. Replace with the new

Honeycomb Cooling Pad by sliding into the grooves of the Rear Grill until it ﬁts comfortably and

securely in place on the grill. Replace the Horizontal Bars back onto the Rear Grill by replacing the

Left and Right Side screws and tightening them in place. This secures the Honeycomb Cooling

Pad in place on the Rear Grill.

Repeat steps 1 to 4 to remove the Honeycomb Cooling Pad on the Left and Right Side Grills.

Removing the Honeycomb Cooling Media:

WARNING: DO NOT operate the Air Cooler when any or all of the Rear or Side Grills are removed

from the Air Cooler, or if there is a loose-ﬁtting Rear or Side Grill. Doing so can cause serious injury or

dangerous electrical shock.

CLEANING THE HONEYCOMB COOLING MEDIA (CONTINUED)

Step 2:

Rear Grill

Step 1:

Rear Grill

Screws

Step 3:

Rear

Honeycomb Pad

Screws

Horizontal

Bars

Step 4:

Rear

Honeycomb

Pad

Rear Grill

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Klimaanlage Handbücher

Honeywell

Honeywell HM Series Bedienungsanleitung

Honeywell

Honeywell CL30XC Bedienungsanleitung

Honeywell

Honeywell CL48PM Bedienungsanleitung

Honeywell

Honeywell CL202PEUI Bedienungsanleitung

Honeywell

Honeywell MN10CESWW Bedienungsanleitung

Honeywell

Honeywell TC09PEU Bedienungsanleitung

Honeywell

Honeywell CO30XE Bedienungsanleitung

Honeywell

Honeywell CS04XE Bedienungsanleitung

Honeywell

Honeywell AMH-10000E Bedienungsanleitung

Honeywell

Honeywell HL10 Series Bedienungsanleitung

Honeywell

Honeywell CS074AEKK Bedienungsanleitung

Honeywell

Honeywell TC30PE Series Bedienungsanleitung

Honeywell

Honeywell MM14CCSBB Bedienungsanleitung

Honeywell

Honeywell MM Series Bedienungsanleitung

Honeywell

Honeywell CL25AE Bedienungsanleitung

Honeywell

Honeywell CS10PE Bedienungsanleitung

Honeywell

Honeywell MN10CED Series Bedienungsanleitung

Honeywell

Honeywell HT09CESAWK Bedienungsanleitung

Honeywell

Honeywell CS10XE Series Bedienungsanleitung

Honeywell

Honeywell MN1CFS8 Bedienungsanleitung

Honeywell

Honeywell MM14CCS Bedienungsanleitung

Honeywell

Honeywell MP09 Series Bedienungsanleitung

Honeywell

Honeywell CL20AE Bedienungsanleitung

Honeywell

Honeywell CL15AE Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung