Honeywell Dolphin CN80G Bedienungsanleitung

CN80G CAC Reader

and Ethernet Base

Quick Start Guide

CN80G-CAC-EN-QS-01 Rev A

04/19

Model: CN80G-CAC, CN80-EB-C

Caution: We recommend the use of Honeywell

accessories and power adapters. Use of any non-

Honeywell accessories or power adapters may cause

damage not covered by the warranty

Caution: Make sure that all components are dry prior to

using the computers and batteries with accessories.

Using wet components may cause damage not covered by

the warranty.

About the Common Access Card Reader

Before you connect the Dolphin CN80G to the CAC Reader,

make sure you have the most current software installed. To

check the computer’s system information:

1. Swipe up from the bottom of the Home screen to access all

apps.

2. Tap HUpgrader to open the Honeywell Updater app.

The OTA version number installed on the computer appears

on the screen.

The OTA version must be 85.06.00-(0145) or higher. How to

install OTA updates can be found in the Dolphin CN80G User

Guide on www.honeywellaidc.com.

About the Status LED

Install the CN80G CAC Reader

Status Description

Flashing Green The reader is connected to CN80G.

Solid Green The reader is reading a common access card.

Status LED

Remove the CN80G CAC Reader

Insert the Card

Insert a common access card into the slot with the contact pins

facing up.

Ethernet Base

The CAC Reader Ethernet Base (Model CN80-EB-C) is ordered

and sold separately. For help, contact your local sales represen-

tative.

Connect Power

Use only a UL Listed power supply which has been qualified by

Honeywell with an output rated at 12 VDC and 3 A. The power

supply input rating is 90-264 VAC, 50/60 Hz. The operating

temperature is -20 °C to 40 °C (-4 °F to 104 °F). The maximum

output of the terminal is 9VDC/2A.

1. Plug the power cord into the power supply.

2. Plug the power supply cable into the power connector on

the back of the base.

3. Plug the power cord into a standard wall outlet.

Ethernet Port

USB Host DC Power

Charge the Battery Pack

Insert a battery pack into the base.

About the Status LEDs

Note: The Dolphin CN80G with an attached CAC Reader can only

be used with the CAC Reader Ethernet Base.

LED Status Description

Ethernet

Status

Solid

White

CN80G is connected to an Ethernet network.

Off There is no Ethernet connection or CN80G

mobile computer is not connected.

Dock Status Solid

White

The device is connected to the base.

Battery LED

Dock LED

Ethernet LED

Battery

Status

Solid

Green

The battery is connected to external power

and is fully charged.

Solid

Amber

The battery is connected to external power

and is charging.

Blinking

Red

There is a battery charging fault, such as

over-temperature.

LED Status Description

Mount the Base

You can mount the base on a flat, horizontal surface such as a

desktop or workbench with an optional DIN rail.

Mounting hardware required:

•DINrail

• 3/16-inch diameter x 5/8-inch long pan head screw

• 1/2-inch OD x 7/32-inch ID x 3/64-inch thick washer

• 3/16-inch diameter nut

1. Slide the DIN rail into the slot on the bottom of the

base.

2. Secure the DIN rail to the flat surface with the hardware.

Support

To search our knowledge base for a solution or to log into the

Technical Support portal and report a problem, go to

www.hsmcontactsupport.com.

Product Documentation

Product documentation is available at www.honeywellaidc.com.

Limited Warranty

For warranty information, go to www.honeywellaidc.com and

click Get Resources > Product Warranty.

Patents

For patent information, see www.hsmpats.com.

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make

changes in specifications and other information contained in

this document without prior notice, and the reader should in all

cases consult HII to determine whether any such changes have

been made. The information in this publication does not

represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or

omissions contained herein; nor for incidental or consequential

damages resulting from the furnishing, performance, or use of

this material. HII disclaims all responsibility for the selection

and use of software and/or hardware to achieve intended

results.

This document contains proprietary information that is

protected by copyright. All rights are reserved. No part of this

document may be photocopied, reproduced, or translated into

another language without the prior written consent of HII.

Inhaltsverzeichnis

Andere Honeywell Kartenleser Handbücher

Honeywell

Honeywell Accentic 026423 Bedienungsanleitung

Honeywell

Honeywell Dolphin 9700-MSCR Bedienungsanleitung

Honeywell

Honeywell Accentic Gebrauchsanweisung

Honeywell

Honeywell OmniClass OM15 Bedienungsanleitung

Honeywell

Honeywell IH25-0 Bedienungsanleitung

Honeywell

Honeywell OmniProx OP-95 Bedienungsanleitung

Honeywell

Honeywell Temaline TKL19 Bedienungsanleitung

Honeywell

Honeywell luminAXS Series Gebrauchsanweisung

Honeywell

Honeywell SPR-S8EZS Bedienungsanleitung

Honeywell

Honeywell OmniTek OmniProx OP10 Series Bedienungsanleitung

Honeywell

Honeywell IdentIPoint Bedienungsanleitung

Honeywell

Honeywell IF2 Bedienungsanleitung

Honeywell

Honeywell 1026FF02F9 Bedienungsanleitung

Honeywell

Honeywell IF2B Bedienungsanleitung

Honeywell

Honeywell IF2 Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch