Honeywell Farenhyt Series Bedienungsanleitung

P/N 151443 Rev C

ECN 16-0218

RA-2000 Remote Annunciator

Installation Instruction

The RA-2000, an optional 4x40 Remote Annunciator,

is shown in Figure 1. The RA-2000 can be surface or

flush-mounted and is available in gray color as RA-

2000GRAY.

Figure 1: Model RA-2000GRAY Remote Annunciator

Compatibility

The RA-2000 is compatible with Honeywell’s

Farenhyt Series FACP's.

Note: For more information, see the FACP Installation manual.

Specifications

Mounting

Flush Mounting

Follow these steps to flush mount the RA-2000

1. The backbox measures 9-1/4” W x 8-3/8” H. The

backbox can be mounted prior to the complete

installation of the RA-2000 using any of the

mounting holes shown in Figure 2.

Figure 2: Backbox Mounting Holes

2. Remove knockout holes as needed for wires.

See Figure 3 for backbox knockout locations

Figure 3: Backbox Knockout Locations

3. Wire the annunciator board to the main control

panel. See Figure 7.

4. Attach the annunciator/door assembly to

backbox as shown in Figure 4 using the supplied

Parameter Value

Operating Voltage: 24VDC

Current Standby: 25mA

Alarm: 50mA

Operating

Temperature: 0° to 49° C (32° to 120° F)

Dimensions:

Flush

Mount:

Overall: 12¼” W x 11½” H x 7/8” D

(31.1 cm W x 29.2 cm H x 2.2 cm

D) See “Flush Mounting” for back-

box dimensions.

Surface

Mount:

Including trim ring:

12¼” W x 11½” H x 3” D

31.1 cm W x 29.2 cm H x 7.6 cm D

mounting holes

wire knockouts

Model RA-2000 Installation Instructions

2P/N 151443 Rev C

ECN 16-0218

Farenhyt™is a trademark, JumpStart® and Honeywell®are registered trademark of Honeywell International, Inc.

screws.

Figure 4: Attaching Door Assembly to Backbox

Surface Mounting

1. Remove the desired knockout. See Figure 3.

2. To properly mount the backbox, insert a single

screw into the key shaped mounting hole. Do not

tighten all the way. See Figure 5.Place a level on

top of the backbox, with the backbox level insert

the rest of the mounting screws.

Figure 5: Backbox Surface Mount Holes

3. Connect wires from the RA-2000 to the SBUS

connectors on the FACP. See Figure 7.

4. The RA-2000TR or RA-2000GRAYTR ring trim

kits are available for use when surface mounting.

Place the trim ring over the backbox as shown in

Figure 6.

Figure 6: Installing Trim Ring

5. Attach the annunicator/door assembly to the

backbox using screws provided (see Figure 4).

6. Replace the electronic assembly in the backbox.

Wiring Connections

Wire the RA-2000 to the FACP as Shown in Figure 7.

Figure 7: SBUS Connections

Installation

1. Ensure power is turned off at the panel.

2. Mount the RA-2000 in the desired location.

3. Connect the RA-2000 to the panel (see Figure

7).

4. Use the DIP switches on the back of the RA-

2000 to assign an ID number. (See FACP

manual).

5. The RA-2000 module must be added to the

system through programming. JumpStart®will

add the module automatically. Refer to the FACP

manual for more information.

key shaped

mounting hole

backbox

mounting holes

Andere Handbücher für Farenhyt Series

Dieses Handbuch passt für folgende Modelle

Andere Honeywell Bedienfeld Handbücher

Honeywell

Honeywell NOTIFIER ID62 Merkblatt

Honeywell

Honeywell Galaxy 18Galaxy Betriebsanleitung

Honeywell

Honeywell Tuxedo Touch Wi-Fi Montageanleitung

Honeywell

Honeywell Gent Viglion EN54 Installations- und Betriebshandbuch

Honeywell

Honeywell Domonial CMI 800++ Benutzerhandbuch

Honeywell

Honeywell 13270-01LB Bedienungsanleitung

Honeywell

Honeywell MS-9200UDLSE Bedienungsanleitung

Honeywell

Honeywell 6820 Bedienungsanleitung

Honeywell

Honeywell NOTIFIER NFW-50X Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms MS-9050UD Bedienungsanleitung

Honeywell

Honeywell Notifier NFS-320/E/C Bedienungsanleitung

Honeywell

Honeywell MS-10UD Series Bedienungsanleitung

Honeywell

Honeywell GX-Series Montageanleitung

Honeywell

Honeywell Notifier ID50 Merkblatt

Honeywell

Honeywell NOTIFIER SFP-10UD Series Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms ES-50X Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms ES-1000X Bedienungsanleitung

Honeywell

Honeywell ENVIRAZONE PANEL W8835 Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms MRP-2001 Bedienungsanleitung

Honeywell

Honeywell Silent Knight 5860 Handbuch

Honeywell

Honeywell Notifier ID3000 Series Leitfaden

Honeywell

Honeywell LT-32 Bedienungsanleitung

Honeywell

Honeywell Notifier NFS2-640 Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms MS-9600LS Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten

Truma

Truma CP plus Bedienungsanleitung