Honeywell THOR VM1 Bedienungsanleitung

Thor VM1 Field Replaceable Front Panel

The front panel of the Thor VM1 is field replaceable. The front panel assembly contains the keyboard, touchscreen and optional

defroster. Should any of these components fail, the front panel assembly can easily be replaced to minimize downtime. The replacement

front panel is available in several configurations.

Requirements - User Supplied

• Torquing tool capable of measuring inch pounds

• #2 Phillips screwdriver bit

Replacing Front Panel

1. If the Thor VM1 has a Windows CE operating system, place the Thor VM1 in Suspend by pressing the Power button on the front of

the Thor VM1. If the Thor VM1 has a Windows Embedded Standard operating system, select Shut Down from the Windows Shut

Down menu.

2. Remove the Thor VM1 from the Quick Mount Smart Dock by pulling

down on the red quick release handle, lifting the bottom of the Thor VM1

away from the dock, and lifting the Thor VM1 up and away from the

dock.

3. Place the Thor VM1 face down on a clean, well lit stable surface.

4. Use a #2 Phillips bit to loosen the captive M3 screws

on the tethered access panel with the SIM label.

SIM Label

5. Remove the tethered access panel from the opening and press the UPS battery disconnect button located

just below the SIM card installation slot.

6. Reinstall the access panel cover. Torque the M3 screws to 4-5 inch pounds using a #2 Phillips bit.

7. Turn the Thor VM1 face up.

8. Use a #2 Phillips bit to loosen the fourteen (14) captive

M3 screws that hold on the front panel.

9. Carefully lift the front panel away from the device.

11 12

13 14

10. Position the replacement front panel so the tab on the back of the front panel lines up with the slot on the Thor VM1. Be sure the two

wiring connectors are also aligned.

11. Gently press the front panel into place.

12. Tighten the fourteen (14) captive M3 screws in the order shown in the figure for step 8 above. Use a #2 Phillips bit and torque the

screws to 6-7 inch pounds.

13. Reinstall the Thor VM1 in the dock. When the Thor VM1 is placed in the powered dock, the UPS battery automatically reconnects.

14. Press the Power button on the front of the Thor VM1.

15. The Thor VM1 automatically recognizes any change in keyboard configuration.

16. If the Thor VM1 has a Windows CE operating system and the defroster configuration has changed, use the Test button on the

Peripherals control panel to update the Thor VM1's configuration. Select Start > Settings > Control Panel > Peripherals and tap

the Test button.

17. The Thor VM1 is ready for use.

Thor VM1 with Front Panel Removed Back of Thor VM1 Front Panel

Slot Wiring Connector

TabWiring Connector

Andere Handbücher für THOR VM1

Inhaltsverzeichnis

Andere Honeywell Bedienfeld Handbücher

Honeywell

Honeywell Gamewell-FCI GWF-7075 Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA SERIES Installationsanleitung

Honeywell

Honeywell IFP-300 Technische Daten

Honeywell

Honeywell AQUATROL AQ25142B Leitfaden

Honeywell

Honeywell Galaxy Dimension series Benutzerhandbuch

Honeywell

Honeywell MiniZone EMM-3 Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms ES-50X Bedienungsanleitung

Honeywell

Honeywell MORLEY IAS DX Series Bedienungsanleitung

Honeywell

Honeywell DX Connexion Series Bedienungsanleitung

Honeywell

Honeywell Galaxy 16 Bedienungsanleitung

Honeywell

Honeywell FCI Gamewell Flex 404 Bedienungsanleitung

Honeywell

Honeywell Notifier NFS-320/E/C Bedienungsanleitung

Honeywell

Honeywell Lynx Touch L5100 Installationsanleitung

Honeywell

Honeywell DeltaNet FS90 Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms MS-9600 Bedienungsanleitung

Honeywell

Honeywell TrolaTemp MABS EZ-2 Bedienungsanleitung

Honeywell

Honeywell NOTIFIER INSPIRE E10 Schulungshandbuch

Honeywell

Honeywell TrueZONE HZ221 Bedienungsanleitung

Honeywell

Honeywell Notifier AFP-100 Bedienungsanleitung

Honeywell

Honeywell NOTIFIER INSPIRE E10 Bedienungsanleitung

Honeywell

Honeywell NOTIFIER NFW-100X Bedienungsanleitung

Honeywell

Honeywell Domonial cmi Bedienungsanleitung

Honeywell

Honeywell GF505 Bedienungsanleitung

Honeywell

Honeywell ControLinks YP7999A1000 Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten