Honeywell 2MLL-PMEC Bedienungsanleitung

Honeywell Process Solutions

Profibus-DP(Pnet) Module

2MLL-PMEB/PSRA/PSEA

User's Guide

R240

January 2018

Release 240

Honeywell

ii Fast Ethernet Module 2MLL-EFMTB/EFMFB User's Guide R240

Honeywell January 2018

Notices and Trademarks

Sárl. Release 240 January 2019

While this information is presented in good faith and believed to be accurate, Honeywell disclaims

the implied warranties of merchantability and fitness for a particular purpose and makes no

express warranties except as may be stated in its written agreement with and for its customers.

In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The

information and specifications in this document are subject to change without notice.

Honeywell, PlantScape, Experion PKS, and TotalPlant are registered trademarks of Honeywell

International Inc.

Other brand or product names are trademarks of their respective owners.

Honeywell Process Solutions

1860 W. Rose Garden Lane

Phoenix, AZ 85027 USA

1-800 822-7673

Revision History

Version Date Remark Page

V 1.0 ’06.02 First Edition -

V1.1 ’07.10 2MLI-CPUU added -

V 2.0 ’10.08 2MLR CPU added -

Ch. 11 Compliance with EMC Specification added -

2MLL-PMEC added -

PROFICON configuration tool added -

Automatic Network Scan modified Ch.9.1.1

2MLL-PSRA added Ch.1.3.3

V 2.1 ’11.05 How to enable link through flag added Ch.5.2.3

V 2.2 ’11.06 Performance specifications added

- Max. number of modules per node : 24 Modules Ch.2.2

V2.3 ’14.11 SoftMaster V4.0 UI Updated -

V2.4 ’16.03

Add 2MLL-PMEB

- PROFIBUS DPv1 setting

- P2P communication setting

- SoftMaster UI updated (2MLL-PMEB contents, P2P

settings)

About User’s Manual

1 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEB User’s Guide R240

Honeywell January2019

Thanks for purchasing MLPLC of Honeywell

Before use, make sure to carefully read and understand the User’s Manual about the functions, performances, installation and

programming of the product you purchased in order for correct use and importantly, let the end user and maintenance

administrator to be provided with the User’s Manual.

The User’s Manual describes the product. If necessary, you may refer to the following description and order accordingly. In

addition, you may connect our website (www.honeywellprocess,com/) and download the information as a PDFfile.

Relevant User’s Manuals

Title Description

SOFTMASTER User’s Manual SOFTMASTER software user manual describing online function

such as programming, print, monitoring, debugging by using

2MLK, ML50 CPU

SOFTMASTER User’s Manual

(for 2MLI, 2MLR)

SOFTMASTER software user manual describing online function

such as programming, print, monitoring, debugging by using

2MLI, 2MLR CPU

2MLK/MLM/MLC Instructions &

Programming User’s Manual

User’s manual for programming to explain how to use

instructions that are used PLC system with 2MLK, MLM/MLC

CPU.

2MLI/2MLR/MLI Instructions &

Programming User’s Manual

User’s manual for programming to explain how to use

instructions that are used PLC system with 2MLI, 2MLR, MLI

CPU.

2MLK CPU User’s Manual

(2MLK-CPUA/CPUE/CPUH/CPUS/CPUU)

2MLK-CPUA/CPUE/CPUH/CPUS/CPUU user manual

describing about 2MLK CPU module, power module, base, IO

module, specification of extension cable and system

configuration, EMC standard

2MLI CPU User’s Manual

(2MLI-CPUU)

2MLI-CPUU user manual describing about 2MLI CPU module,

power module, base, IO module, specification of extension cable

and system configuration, EMC standard

2MLR redundant series User’s

Manual

2MLR-CPUU user manual describing about 2MLR CPU module,

power module, extension drive, base, IO module, specification of

extension cable and system configuration, EMC standard

N Configurator User’s Manual User’s manual for Pnet, Dnet configuration tool, N Configurator

Current user manual is written based on thefollowing version.

Related OS version list

Model O/S version

2MLK-CPUH, CPUS, CPUA, CPUE V2.0

2MLI-CPUU, CPUH V2.0

SOFTMASTER V4.2

2MLR-CPUH/F, CPUH/T V1.0

1 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240

Honeywell January 2019

◎Contents ◎

Chapter 1 Introduction

1.1 Introduction -------------------------------------------------------------------------------------------------------- 1-1

1.2 Characteristics ---------------------------------------------------------------------------------------------------- 1-1

1.3 Product Configuration ------------------------------------------------------------------------------------------- 1-2

1.3.1 Model Name------------------------------------------------------------------------------------------------ 1-2

1.3.2 Available number by CPU------------------------------------------------------------------------------- 1-2

1.3.3 Slave Device ----------------------------------------------------------------------------------------------- 1-3

1.4 Software ------------------------------------------------------------------------------------------------------------- 1-4

1.4.1 Check list for the software ------------------------------------------------------------------------------ 1-4

1.4.2 SOFTMASTER -------------------------------------------------------------------------------------------- 1-5

1.4.3 Checking the version------------------------------------------------------------------------------------- 1-5

Chapter 2 Specifications

2.1 General Specifications ------------------------------------------------------------------------------------------ 2-1

2.2 Performance Specifications ----------------------------------------------------------------------------------- 2-2

2.3 Structure & Characteristics ------------------------------------------------------------------------------------ 2-3

2.3.1 Structure of Pnet I/F module -------------------------------------------------------------------------- 2-3

2.4 Cable Specifications --------------------------------------------------------------------------------------------- 2-6

2.4.1 Cable specifications of Belden network ------------------------------------------------------------- 2-6

Chapter 3 Installation and Test Operation

3.1 Precautions for Installation ------------------------------------------------------------------------------------ 3-1

3.1.1 Precautions for Installation --------------------------------------------------------------------------- 3-1

3.2 From Setting toOperation ------------------------------------------------------------------------------------- 3-2

3.3 Installation of the product -------------------------------------------------------------------------------------- 3-3

3.3.1 Installation of 2MLL-PMEA --------------------------------------------------------------------------- 3-3

3.4 Test Operation ---------------------------------------------------------------------------------------------------- 3-6

3.4.1 Precautions for system configuration ------------------------------------------------------------- 3-6

2 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240

Honeywell January 2019

Chapter 4 System Configuration

4.1 System Configuration of Network ---------------------------------------------------------------------------- 4-1

4.1.1 ML200 Pnet + Smart I/O ----------------------------------------------------------------------------- 4-1

4.1.2 ML200 Pnet + Composite System ----------------------------------------------------------------- 4-2

Chapter 5 Communication Program

5.1 Communication Program --------------------------------------------------------------------------------------- 5-1

5.1.1 Type of communication program ------------------------------------------------------------------- 5-1

5.2 SOFTMASTER --------------------------------------------------------------------------------------------------- 5-2

5.2.1 Setting PLC type----------------------------------------------------------------------------------------- 5-2

5.2.2 Registration of the communication module ------------------------------------------------------- 5-4

5.2.3 Uploading High Speed Link parameter and setup----------------------------------------------- 5-8

5.2.4 Setting P2P Parameter--------------------------------------------------------------------------------5-1 1

Chapter 6 SyCon Setting

6.1 Introduction -------------------------------------------------------------------------------------------------------- 6-1

6.1.1 Main functions ------------------------------------------------------------------------------------------ 6-1

6.1.2 Characteristics ------------------------------------------------------------------------------------------ 6-1

6.2 Installation --------------------------------------------------------------------------------------------------------- 6-1

6.2.1 System requirements --------------------------------------------------------------------------------- 6-1

6.2.2 Software installation ----------------------------------------------------------------------------------- 6-2

6.3 Communication settings in SyCon --------------------------------------------------------------------------- 6-8

6.3.1 Initial screen --------------------------------------------------------------------------------------------- 6-8

6.3.2 Composition of menu --------------------------------------------------------------------------------- 6-9

6.3.3 New file --------------------------------------------------------------------------------------------------6-1 1

6.3.4 Master selection ---------------------------------------------------------------------------------------6-12

6.3.5 Slave selection -----------------------------------------------------------------------------------------6-15

6.3.6 Bus parameter -----------------------------------------------------------------------------------------6-17

6.4 On-line Function -------------------------------------------------------------------------------------------------6-18

6.4.1 Introduction ---------------------------------------------------------------------------------------------6-18

6.4.2 Online to the CIF --------------------------------------------------------------------------------------6-18

6.4.3 Automatic network scan -----------------------------------------------------------------------------6-18

6.4.4 Start/Stop communication ---------------------------------------------------------------------------6-20

6.4.5 Debug mode --------------------------------------------------------------------------------------------6-20

6.4.6 Diagnostic functions ----------------------------------------------------------------------------------6-20

3 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240

Honeywell January 2019

Chapter 7 N Configurator Setting

7.1 Introduction -------------------------------------------------------------------------------------------------------- 7-1

7.1.1 Main functions ------------------------------------------------------------------------------------------ 7-1

7.1.2 Characteristics ------------------------------------------------------------------------------------------ 7-1

7.2 Installation --------------------------------------------------------------------------------------------------------- 7-2

7.2.1 System requirements --------------------------------------------------------------------------------- 7-2

7.2.2 How to install Program --------------------------------------------------------------------------------- 7-2

7.3 Start PROFICON -------------------------------------------------------------------------------------------------- 7-3

7.3.1 Screen composition------------------------------------------------------------------------------------- 7-3

7.3.2 Menu composition--------------------------------------------------------------------------------------- 7-4

7.3.3 New Project(New File) --------------------------------------------------------------------------------7-10

7.4 Network composition through PROFICON-----------------------------------------------------------------7-11

7.4.1 Master composition ------------------------------------------------------------------------------------7-11

7.4.2 Slave composition--------------------------------------------------------------------------------------7-13

7.4.3 Bus parameter-------------------------------------------------------------------------------------------7-16

7.5 Download and upload Network Configuration-------------------------------------------------------------7-17

7.5.1 Download Network Settings -------------------------------------------------------------------------7-17

7.5.2 Upload Network Settings -----------------------------------------------------------------------------7-19

7.6 Diagnosis function------------------------------------------------------------------------------------------------7-20

7.6.1 Start / Stop Communication--------------------------------------------------------------------------7-20

7.6.2 Debug mode (Start/Stop Debug Mode, Device Diagnostics) --------------------------------7-20

7.6.3 Live List ---------------------------------------------------------------------------------------------------7-22

7.6.4 Automatic Network Scan------------------------------------------------------------------------------7-23

7.6.5 I/O Data Monitoring ------------------------------------------------------------------------------------7-24

7.6.6 Disconnection Report----------------------------------------------------------------------------------7-25

7.6.7 Master information (Device Information)----------------------------------------------------------7-25

7.6.8 Master reset (Firmware Reset)----------------------------------------------------------------------7-25

Chapter 8 High-speed Link

8.1 Introduction -------------------------------------------------------------------------------------------------------- 8-1

8.2 Process of High-speed Link Send/Receive Data --------------------------------------------------------- 8-2

8.3 Operation Sequence of High-speed Link ------------------------------------------------------------------- 8-3

8.4 High Speed Link Parameter Setting--------------------------------------------------------------------------- 8-4

8.5 High-speed Link Information ---------------------------------------------------------------------------------8-10

8.5.1 Monitor of High-speed link information ----------------------------------------------------------8-12

4 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240

Honeywell January 2019

Chapter 9 P2P

9.1 Introduction -------------------------------------------------------------------------------------------------------- 9-1

9.2 Process of P2P Read/Write Data ---------------------------------------------------------------------------- 9-2

9.3 Operation Sequence of P2P ---------------------------------------------------------------------------------- 9-3

9.4 P2P Parameter Setting------------------------------------------------------------------------------------------- 9-4

9.5 P2P Informatio-n ------------------------------------------------------------------------------------------------- 9-9

Chapter 10 Program Example

10.1 Example of Communication with PMEA -----------------------------------------------------------------10-1

10.1.1 SyCon settings ---------------------------------------------------------------------------------------10-1

10.1.2 SOFTMASTER settings ----------------------------------------------------------------------------10-9

10.2 Example of Communication with PMEA ---------------------------------------------------------------10-14

10.2.1 PROFICON settings ------------------------------------------------------------------------------10-14

10.2.2 SOFTMASTER settings --------------------------------------------------------------------------10-23

Chapter 11 Troubleshooting

11.1 Symptoms and Management by LED Status -----------------------------------------------------------11-1

11.2 System Diagnosis of SOFTMASTER ---------------------------------------------------------------------11-2

11.2.1 Information on communication module ---------------------------------------------------------11-2

11.2.2 High-speed link ---------------------------------------------------------------------------------------11-3

11.2.3 Log ------------------------------------------------------------------------------------------------------11-3

11.2.4 Auto-scan ----------------------------------------------------------------------------------------------11-4

11.3 Diagnosis of Communication Module through SOFTMASTER -------------------------------------11-5

11.4 Troubleshooting ------------------------------------------------------------------------------------------------11-6

11.4.1 SyCon abnormal connection ----------------------------------------------------------------------11-6

11.4.2 SOFTMASTER abnormal connection ----------------------------------------------------------11-7

11.4.3 Abnormal connection with slave module -------------------------------------------------------11-8

Chapter 12 Compliance with EMC Specifications

12.1 Requirements Complying with EMC Specifications ----------------------------------------------------12-1

12.1.1 EMC specifications -----------------------------------------------------------------------------------12-1

12.1.2 Panel-----------------------------------------------------------------------------------------------------12-2

12.1.3 Cable-----------------------------------------------------------------------------------------------------12-3

12.2 Requirements Complying with Low Voltage Direction ------------------------------------------------12-4

12.2.1 Specifications applicable to ML200 series------------------------------------------------------12-4

12.2.2 Selection of ML200 series PLC--------------------------------------------------------------------12-4

5 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240

Honeywell January 2019

Appendix

A.1 Terminology -------------------------------------------------------------------------------------------------------A-1

A.2 List of Flags -------------------------------------------------------------------------------------------------------A-3

A.2.1 High-speed link flags ------------------------------------------------------------------------------------A-3

A.2.2 Link devices

(N) ------------------------------------------------------------------------------------------A-6

A.3 Dimensions --------------------------------------------------------------------------------------------------------A-8

Chapter 1 Introduction

1 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240

Honeywell January 2019

Chapter 1 Introduction

1.1 Introduction

This user’s manual is to describe Profibus-DP (Decentralized Peripherals) Master I/F module (hereinafter

referred to as Pnet I/F module) among communication modules of ML200 PLC system.

Profibus-DP is specified in IEC Fieldbus Standard IEC 1158.

In this communication, Token Ring is used to control the communication and to configure the network easily.

Pnet I/F module is a module to control the field bus with Twisted Shielded Pair Copper Cable applied.

1.2 Characteristics

ML200 Pnet I/F module has the characteristics as follows;

▶Conforms to the international standard of EN 50170

▶Supports Auto Baud Rate Detect

▶Supports Sync/Freeze mode

▶Max. input data : 244 Bytes/Slave

▶Max. output data: 244 Bytes/Slave

▶Max. data size : 244 Bytes/Slave, 10 kbyte/Master

▶Communication speed : 9.6k, 19.2k, 31.25k, 45.45k, 93.7k, 187.5k, 500k, 1.5M, 3M, 6M, 12M

Active Stations, Master Devices

Passive Stations (Slave Devices) are polled

PROFIBUS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Steuereinheit Handbücher

Honeywell

Honeywell S8921D Bedienungsanleitung

Honeywell

Honeywell AM-1 Series Bedienungsanleitung

Honeywell

Honeywell AM-1 Series Bedienungsanleitung

Honeywell

Honeywell S8600A Bedienungsanleitung

Honeywell

Honeywell D05FS Bedienungsanleitung

Honeywell

Honeywell C7110C1040 Bedienungsanleitung

Honeywell

Honeywell MasterLogic 50 Series Bedienungsanleitung

Honeywell

Honeywell NOTIFIER XP10-M Bedienungsanleitung

Honeywell

Honeywell BA295STN-11/2C Bedienungsanleitung

Honeywell

Honeywell L4017 Bedienungsanleitung

Honeywell

Honeywell BSM Montageanleitung

Honeywell

Honeywell Kromschroder TC 1 Bedienungsanleitung

Honeywell

Honeywell PEHA 450 FU-SP 2 Bedienungsanleitung

Honeywell

Honeywell AlarmNet GSMBR Montageanleitung

Honeywell

Honeywell BA295S Bedienungsanleitung

Honeywell

Honeywell 7800 SERIES Bedienungsanleitung

Honeywell

Honeywell NOTIFIER M701E Bedienungsanleitung

Honeywell

Honeywell FF-SRS5988 Bedienungsanleitung

Honeywell

Honeywell VC Series Bedienungsanleitung

Honeywell

Honeywell Silent knight 5895XL Bedienungsanleitung

Honeywell

Honeywell SV2 Series Bedienungsanleitung

Honeywell

Honeywell S4560B1006 Bedienungsanleitung

Honeywell

Honeywell BA295 Compact Bedienungsanleitung

Honeywell

Honeywell 7800 SERIES Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung