Honeywell 7800 SERIES Bedienungsanleitung

PRODUCT DATA

® U.S. Registered Trademark

65-0095-2

7800 SERIES

S7820 Remote Reset Module

APPLICATION

The 7800 Series is programmed to provide a level of safety,

functional capability and features beyond the capacity of

conventional controls. Functions provided by the 7800 Series

include automatic burner sequencing, flame supervision,

system status indication, system or self diagnostics and

troubleshooting.

The S7820 Remote Reset Module serves as a link between a

remote reset switch and the Relay Module. Similar to the

S7800 Keyboard Display Module, it allows the 7800 SERIES

Burner Control to be reset from a remote switch, but provides

none of the other Keyboard Display Module or Data

Controlbus Module™ features.

FEATURES

•Capability to reset 7800 SERIES Relay Module from a

remote location.

• Reset button can be installed up to 1000 feet away.

•Can be installed directly onto the front of a 7800

SERIES Relay Module.

NOTE: Many jurisdiction restrict remote resetting of any

appliance and require a location that provides line-

of-sight viewing of the appliance. Install the S7820

Remote Reset Module in accordance with local

requirements.

Contents

Application............................................................................. 1

Features ................................................................................ 1

Specifications ........................................................................ 2

Ordering Information ............................................................. 2

Installation ............................................................................. 2

Checkout ............................................................................... 3

7800 SERIES S7820 REMOTE RESET MODULE

65-0095—2 2

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the

TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or

phone:

1. Your local Home and Building Control Sales Office (check white pages of your phone directory).

2. Home and Building Control Customer Logistics

Honeywell, 1885 Douglas Drive North

Minneapolis, Minnesota 55422-4386

3. www.honeywell.com/bbc

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.

International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,

Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

SPECIFICATIONS

Electrical Connectors (included):

Part no. 203541 ControlBus 5-Wire Electrical Connector,.

Environmental Ratings:

Ambient Temperature:

Operating: -40°F to 140°F (-40°C to 60°C).

Storage: -40°F to 150°F (-40°C to 66°C).

Humidity:

Operating: 85% RH continuous, noncondensing.

Vibration: 0.5 G environment.

Dimensions:

See Fig. 1.

Weight:

3 ounces (86 grams) unpacked.

M1986A

BURNER CONTROL

2-3/4

(69)

29/32

(23)

5/32

(4)

4-27/32

(123)

Fig. 1. Remote Reset Module dimensions in in. (mm).

INSTALLATION

When Installing this Product…

1. Read these instructions carefully. Failure to follow them

could damage the product or cause a hazardous

condition.

2. Check the ratings given in the instructions and marked

on the product to make sure the product is suitable for

the application.

3. The installer must be a trained, experienced, flame

safeguard control technician.

4. Disconnect the power supply before beginning

installation to prevent electrical shock and equipment

damage. More than one power supply disconnect may

be involved.

5. Wiring must comply with all applicable codes,

ordinances and regulations.

6. After installation is complete, check out the product

operation as provided in these instructions.

Humidity

Install the S7820 Remote Reset Module where the relative

humidity never reaches the saturation point. The S7820

Remote Reset Module is designed to operate in a maximum

85% relative humidity (RH) continuous, noncondensing,

moisture environment.

Vibration

Do not install the S7820 Remote Reset Module where it can

be exposed to vibration in excess of 0.5G continuous

maximum vibration.

7800 SERIES S7820 REMOTE RESET MODULE

65-0095—2

Weather

The S7820 Remote Reset Module is not designed to be

weather tight. If installed outdoors, the S7820 Remote Reset

Module must be protected by an approved weather-tight

enclosure.

Mounting the Remote Reset Module

(see Fig. 2)

Fig. 2. Mounting Remote Reset Module.

The S7820A Remote Reset Module mounts directly on the

Relay Module.

1. Align the two interlocking ears of the Remote Reset

Module with the two mating slots on the 7800 SERIES

Relay Module.

2. Push on the lower corners of the S7820 Remote Reset

Module with a hinge action to secure it to the 7800

SERIES Relay Module.

Wiring

1. Disconnect the power supply from the main disconnect

before beginning installation to prevent electrical shock

and equipment damage. More than one disconnect may

be involved.

2. All wiring must comply with all applicable electrical

codes, ordinances and regulations.

3. Use recommended wire size and type no. 22 AWG or

greater twisted pair, insulated for low voltage) that is

suitable for wiring the Remote Reset Module.

4. Use recommended grounding practice of connecting

the momentary remote reset switch to terminal 3(c) on

the Remote Reset Module (see Fig. 3).

Fig. 3. Wiring Remote Reset Module.

5. Use recommended wire routing of avoiding running line

voltage circuits, high voltage wires, and high voltage

ignition transformer wires in the same conduit with the

remote reset wiring.

6. Use maximum wire length of 1000 feet (305 meters) to

a remote reset switch.

7. Install all electrical connectors.

8. Restore power to the panel.

CHECKOUT

Push the momentary pushbutton switch and make sure that

the 7800 SERIES Relay Module resets.

NOTE: Many jurisdictions restrict remote resetting of an

appliance and require a location that provides line-

of-sight viewing of the appliance. Install the S7820

Remote Reset Module in accordance with local

requirements.

C (GND)

+13 VDC

RESET

123 45

MOMENTARY

PUSH BUTTON

SWITCH

S7820 REMOTE RESET MODULE

M1981A

7800 SERIES S7820 REMOTE RESET MODULE

65-0095—2 4

Honeywell Europe S.A.

3 Avenue du Bourget

1140 Brussels

Belgium

Honeywell Asia Pacific Inc.

Room 3213-3225

Sun Hung Kai Centre

No. 30 Harbour Road

Wanchai

Hong Kong

Home and Building Control

Honeywell Limited/Honeywell Limitée

35 Dynamic Drive

Scarborough, Ontario

M1V 4Z9

Honeywell Latin American Region

480 Sawgrass Corporate Parkway

Suite 200

Sunrise FL 33325

65-0095—2 G.R. Rev. 11-98

Home and Building Control

Honeywell

1985 Douglas Drive North

Minneapolis MN 55422-4386

Printed in U.S.A. on recycled

paper containing at least 10%

post-consumer paper fibers.

www.honeywell.com/bbc

Andere Handbücher für 7800 SERIES

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Steuereinheit Handbücher

Honeywell

Honeywell ADEMCO 4100SM Montageanleitung

Honeywell

Honeywell SmartValve SV9520H Bedienungsanleitung

Honeywell

Honeywell 9410 Series Gebrauchsanweisung

Honeywell

Honeywell MCV2000AA Montageanleitung

Honeywell

Honeywell DirectLine DL423 Bedienungsanleitung

Honeywell

Honeywell PRO32OUT Bedienungsanleitung

Honeywell

Honeywell PS300 Bedienungsanleitung

Honeywell

Honeywell CentraLine CLIOL822A Bedienungsanleitung

Honeywell

Honeywell Notifier FCM-1-REL Bedienungsanleitung

Honeywell

Honeywell RF CM61NG Bedienungsanleitung

Honeywell

Honeywell NOTIFIER LDM Series Bedienungsanleitung

Honeywell

Honeywell Elster Jeavons S300 Bedienungsanleitung

Honeywell

Honeywell 39358 Bedienungsanleitung

Honeywell

Honeywell V5004TF Bedienungsanleitung

Honeywell

Honeywell MasterLogic 50 Series Bedienungsanleitung

Honeywell

Honeywell LTE-L57V Bedienungsanleitung

Honeywell

Honeywell 7800 SERIES Bedienungsanleitung

Honeywell

Honeywell Braukmann BV300 Bedienungsanleitung

Honeywell

Honeywell S7800A Bedienungsanleitung

Honeywell

Honeywell RA890F Protectorelay Primary Control Installationsanleitung

Honeywell

Honeywell BCU 460 Handbuch

Honeywell

Honeywell SM120 Bedienungsanleitung

Honeywell

Honeywell CF4680 Bedienungsanleitung

Honeywell

Honeywell W6215 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung