Honeywell CN100 Technisches Handbuch
CN100 Controller Hardware
Planning and Installation Guide
EPDOC-X630-en-516A
August 2020
EXPERION PKS
RELEASE 516
DISCLAIMER
This document contains Honeywell proprietary information.
Information contained herein is to be used solely for the purpose
submitted, and no part of this document or its contents shall be
reproduced, published, or disclosed to a third party without the
express permission of Honeywell International Sàrl.
While this information is presented in good faith and believed to be
accurate, Honeywell disclaims the implied warranties of
merchantability and fitness for a purpose and makes no express
warranties except as may be stated in its written agreement with and
for its customer.
In no event is Honeywell liable to anyone for any direct, special, or
consequential damages. The information and specifications in this
document are subject to change without notice.
Copyright 2020 - Honeywell International Sàrl
2
3
CONTENTS
Contents 3
Chapter 1 - About this guide 5
Chapter 2 - Overview 7
Chapter 3 - Hardware Components 9
Redundant Controller 12
Chapter 4 - CN100 Platform Installation 17
Environmental Specifications 18
Power Considerations 18
Power Requirements 18
Power Consumption 19
Installation Declarations 19
Dimensions and Layouts 20
Dimensions of Redundant CN100 Controller 21
Installation Dimensions for a Redundant Controller 23
Mounting 24
Mounting a Controller on dinrail 24
Mounting a Controller on CCA 24
Wiring and Cabling Planning 26
Power Cabling 27
Grounding and Other Considerations 28
Communication Cabling 30
Connecting with Wireless I/O 33
Chapter 5 - Maintenance 35
CN100 module, NAM, IOTA 36
Safety considerations - PLAN AHEAD! 36
Contents
Removal and Insertion Under Power (RIUP) 37
Replacing a CN100 Controller 37
Replacing a NAM 38
Replacing an IOTA 39
Spare parts and model numbers 41
Chapter 6 - Diagnostics and Troubleshooting 43
LED Indicators of a Redundant Controller 44
Additional Information 48
Chapter 7 - Special Condition of Use and Approved Standards 51
Approval Rating of CN100 51
Special Condition of Use for Division 2/Zone 2 Hazardous Location
Installation 52
For the United States 52
For Canada 52
For ATEX and IECEx 53
Approved Standards for Division 2/Zone 2 Hazardous Location 53
US Approval Standards 53
Canadian Standards 54
European Standards (Zone 2) 54
CE LVD and EMC Compliance Standards 55
IEC Standards (Zone 2) 56
Notices 57
4
Contents
CHAPTER
1ABOUT THIS GUIDE
This publication provides the information on hardware planning,
installation, operation and maintenance for Honeywell CN100
Controller.
For software and firmware considerations, see Experion Control
Builder User’s Guide.
Revision history
Revision Date Description
AAugust 2020 Initial release of document
Introduction to Experion Technology
Item Description
CN100
Module
CN100 controllers running the eCLR (IEC 61131-3) execution
environment with CN100 software options configured with Control
Builder.
Network
Adapter
Module (NAM)
Network Adaptor Modules (CC-INAM01) provides for Uplink
Ethernet connections and supports copper or Fiber connectivity.
Special terms
The following table describes some commonly used industry-wide
and Honeywell-specific terminology:
Terminology Description
NAM Network Adapter Module
5
How to use this guide
The following table outlines the tasks involved in planning and
installing a CN100 Controller. The links provided will navigate you
through those tasks.
Task Go to
Check the model number of the
hardware components
See "Hardware Components" on page9 for
more information.
Plan the architecture of your system "System Architecture Planning" on page1
Understand and plan the hardware
components of your system
See "Hardware Components" on page9 for
more information.
Plan the wiring of your system See "Wiring and Cabling Planning" on
page26 for more information.
Troubleshoot your system "Diagnostics and Troubleshooting" on
page1
Remove or replace system components See "Maintenance" on page35 for more
information.
Software installation See Software Installation User’s Guide for
detailed information.
Software configuration See Control Builder User’s Guide for
detailed information.
Related documents
The following list identifies publications that may contain information
relevant to the information in this document:
nExperion Software Installation User’s Guide
6
Chapter 1 - About this guide
CHAPTER
2OVERVIEW
Make sure all the hardware modules used in the system are installed
with the right firmware version and the engineering station has the
latest Experion Control Builder. You can find the firmware and
software updates on http://www.honeywellprocess.com with valid
credentials.
If the equipment is not used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
CN100 controller is a modular, powerful, and scalable system capable
of all remote automation and control applications. When combined
with Experion®PKS and its simplified SCADA configuration, it solves
the remote automation requirements.
Starting with R515, a new redundant controller CN100 is added in
Experion PKS.
7
8
Chapter 2 - Overview
CHAPTER
3HARDWARE COMPONENTS
CN100 Platform comes with a redundant controller option. The
controller can be expanded with the same CN100 Platform I/O
Modules or connect with Series C IOM by IOLINK. Depending on
software support, other form factor I/O modules along with Wireless
I/O are supported. See the images and table below for the CN100
Platform Hardware.
Figure 3-1: Redundant CN100 Controller (CCA) Front View
9
Figure 3-2: Redundant CN100 Controller (DINRAIL) Front View
Table 3-1: CN100 Hardware Components
Item Model Number Description
1 CC-IION01 I/O NETWORKING & CONTROL MODULE
2CC-TION11 I/O NETWORKING & CONTROL IOTA
3CC-TION13 I/O NETWORKING & CONTROL IOTA - DIN RAIL
4 CC-INAM01 NETWORK ADAPTER MODULE
10
Chapter 3 - Hardware Components
Inhaltsverzeichnis
Andere Honeywell Controller Handbücher
Honeywell
Honeywell 7800 SERIES RM7895A Bedienungsanleitung
Honeywell
Honeywell ML4195E Bedienungsanleitung
Honeywell
Honeywell DB7110U1000 Bedienungsanleitung
Honeywell
Honeywell Vista Automation Module Bedienungsanleitung
Honeywell
Honeywell Zio TR70 Bedienungsanleitung
Honeywell
Honeywell RA116A Bedienungsanleitung
Honeywell
Honeywell HR 80 Bedienungsanleitung
Honeywell
Honeywell MN7220 Bedienungsanleitung
Honeywell
Honeywell VU443A Bedienungsanleitung
Honeywell
Honeywell CD3000M-3PH Bedienungsanleitung
Honeywell
Honeywell Experion 8 Series Handbuch
Honeywell
Honeywell HON 5020 Betriebsanleitung
Honeywell
Honeywell Touchpoint 1 Bedienungsanleitung
Honeywell
Honeywell BC7000L1000 Handbuch
Honeywell
Honeywell ML6420A3072 Bedienungsanleitung
Honeywell
Honeywell Elster Jeavons J125 Bedienungsanleitung
Honeywell
Honeywell IPC5000 Bedienungsanleitung
Honeywell
Honeywell R4560 Bedienungsanleitung
Honeywell
Honeywell 191238-ZCS Bedienungsanleitung
Honeywell
Honeywell ML7420A6025T Bedienungsanleitung
