Honeywell DC1000 SERIES Bedienungsanleitung

DC1000 Series Program Configuration Guide

Operation Mode Configuration 1

Configuration 2Program Mode

Set Up Mode

(1)

(3) (2) (2)

(3)

How to move from a MODE to another

(1) Press ‘SET’ key for 5 seconds, it grants access to ‘Configuration 1’ mode or return to

‘Operation’ mode from ‘Configuration 1’ mode.

(2) Press ‘SHIFT’ key for 5 seconds while pressing ‘SET’ key first, it grants access to

‘Configuration 2’ mode or return to ‘Operation’ mode.

(3) All parameters related to program configuration will be displayed next to parameters in

‘Operation’ mode. (* These parameters will be shown in program model only)

CAUTION

DO NOT access to ‘Set Up’ mode without instruction from techical assistant.

1. Program Function

The program function of DC1000 has 2 programs, and each program has Max. 8 segments.

Each segment can be defined as a period of “RAMP” or “SOAK” status.

2. Terminologies

Program : A pattern which consists of some segments

Segment : A RAMP status or a SOAK status

RAMP status : Status with changing SP

SOAK status : Status with fixed SP

3. Operation

3-1 Key functions

(START) : Start a program, ‘PRO’ LED to be flickered during the running operation

(WAIT) : Suspend the running program. ‘PRO’ LED will be turned on

+SET(JUMP) : Skip a current segment

+SET(RESET) : Stop the program running. ‘PRO’ LED will be turned off

3-2 Program Alarm Functions

Case 1) Segment Completion Alarm

ALD1 (Alarm Code for Alarm 1) = 07

AL1 (Alarm Condition) = 2 (‘2’ means Segment No.)

ALT1 (Alarm Time) = 00.10

Alarm Operation: Once Segment 2 is completed, Alarm 1 will become actuated

Case 2) Program Running Alarm

ALD1 = 17

Alarm Operation: During the program running, Alarm 1 will become actuated

* DC1000 does not have END, so the program will complete all the segments if segments are defined. If

the program should be finished earlier, set the ‘OUT’ of next segment to 0, then the program running will

be ended right after the previous segment is completed.

3-3 Link Function

PTN=1, Run Program 1 (Max. 8 segments)

PTN=2, Run Program 2 (Max. 8 segments)

PTN=0, Run Program 1 and Program 2 successively (Max. 16 segments)

* To have link function (PTN=0), PTN1 & PTN2 should be set first

Set point for Seg.5

SET

Start from Operation Mode

Set program pattern

Range: 0~2

Program segment display

‘Pattern’ – ‘Segment’

Program timer display

Range: 99hour 59min

Set point for Seg.1

Range: LSPL~USPL

Set time for Seg.1

Range: 0~99H59M

Set output for Seg.1

Range: 0~100% (if out=0, no program)

Set point for Seg.2

Set time for Seg.2

Set output for Seg.2

Set point for Seg.3

Set time for Seg.3

Set output for Seg.3

Set point for Seg.4

Set time for Seg.4

Set time for Seg.5

Set output for Seg.5

Set point for Seg.6

Set time for Seg.6

Set output for Seg.6

Set point for Seg.7

Set time for Seg.7

Set output for Seg.7

Set point for Seg.8

Set time for Seg.8

Set output for Seg.8

Set output for Seg.4

Range: (1,2,0)-(1~8)

Back to Operation Mode

Andere Handbücher für DC1000 SERIES

Andere Honeywell Controller Handbücher

Honeywell

Honeywell Excel 10 Bedienungsanleitung

Honeywell

Honeywell FAST-ACTING, TWO-POSITION ACTUATORS ML4202 Bedienungsanleitung

Honeywell

Honeywell IPC5000 Bedienungsanleitung

Honeywell

Honeywell S7014A Series Bedienungsanleitung

Honeywell

Honeywell M7061 Bedienungsanleitung

Honeywell

Honeywell M896 Bedienungsanleitung

Honeywell

Honeywell MP953D Bedienungsanleitung

Honeywell

Honeywell DC1000 SERIES Bedienungsanleitung

Honeywell

Honeywell HCE80R Bedienungsanleitung

Honeywell

Honeywell M847D Bedienungsanleitung

Honeywell

Honeywell W7752D2007 Bedienungsanleitung

Honeywell

Honeywell ML200 Series Bedienungsanleitung

Honeywell

Honeywell UDC3500 Bedienungsanleitung

Honeywell

Honeywell ML6174 Series Bedienungsanleitung

Honeywell

Honeywell CN05 Series Bedienungsanleitung

Honeywell

Honeywell Excel 10 W7752D Bedienungsanleitung

Honeywell

Honeywell HC900 Bedienungsanleitung

Honeywell

Honeywell Mini-AT Bedienungsanleitung

Honeywell

Honeywell SUPER TRADELINE S8610U Bedienungsanleitung

Honeywell

Honeywell 2RM7800L1087 Service-Handbuch

Honeywell

Honeywell T6590A Bedienungsanleitung

Honeywell

Honeywell V4055F Bedienungsanleitung

Honeywell

Honeywell RP920A-D Montageanleitung

Honeywell

Honeywell V4600 Benutzerhandbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung