Honeywell HC900 Bedienungsanleitung

12/2018 Power Supply Rack Extension Kit # 51-52-33-149 1

HC900 Controller

Power Supply Rack Extension Installation

PS Rack Extension 900RPE - (current revision number)

Document Number Form: 51-52-33-149

Effective Date: 12/2018

Supersedes: 04/2005

Summary

• Optional field installation kit

• Installed on the rack next to the Primary

Power Supply

• Provides a rack extension to hold a 2nd

(Reserve) Power Supply and Power

Status Module per I/O Rack in order to

maintain power to the rack if the Primary

Power Supply fails

• Allows either Power Supply to be

replaced while maintaining power to the

rack using the other Power Supply

• Available for the 8-Slot and 12-Slot I/O

Racks

• Not available for the 4 Slot I/O Rack

8-Slot Rack

12-Slot Rack

8-Slot Rack

12-Slot Rack

Figure 1 PS Rack Extension Location

Procedure Follow the procedure in Table 1 to install a Power Supply (PS) Rack Extension to

an 8-slot or 12-slot I/O rack.

Table 1 – PS Rack Extension Installation

Step Action

1 Remove power to the rack to be extended.

2 Remove the rack from its mounting

and remove all modules from the

rack. Place the empty rack on a

flat surface with the back plate

down.

Controller CPU or Scanner Module Slot

Power Supply Slot

I/O Modules

Controller CPU or Scanner Module Slot

Power Supply Slot

I/O Modules

2 Power Supply Rack Extension Kit # 51-52-33-149 12/2018

Step Action

3 900R12-0200 (Standard Rack) can

be converted to 900R12R-0200

(Redundant power Supply). Locate

resistors R3,R4, R5 and R6 on the

I/O rack backplane. Cut and remove

the resistors, replace end cap.

4 Remove the screws from the

outside of the I/O rack side plate.

Retain the side plate.

JP21

I/O Rack

Side Plate JP21JP21

I/O Rack

Side Plate

5 Attach the PS extension rack to

the I/O rack with 4 of the screws

(SEMS M3 X 5.0 mm long)

provided in the kit.

Make sure that J3 on the PS

extension rack backplane

meshes with JP21 on the I/O

rack backplane.

J3 JP21

J3J3 JP21

6 Attach the side plate previously

removed from the I/O rack to the

PS extension rack using the 6

screws (Flat Head M3 x 6.0 mm

long) provided in the kit.

Note that the countersunk holes in

the plate should face outward.

J3 JP21

I/O Rack

Side Plate

previously removed

J3 JP21

J3J3 JP21

I/O Rack

Side Plate

previously removed

7 You will need to drill two mounting

holes (same size mounting holes

as the main rack) for the 900RPE

rack.

Place the updated rack in

position and mark the 2

mounting hole locations (top

and bottom of rack of the 900

RPE extension).

Remove the rack and drill the

mounting holes.

900RPE Rear

Mounting Plate

900RPE Rear

Mounting Plate

8 Re-install the Power Supply, CPU or Scanner and I/O modules.

9 If available, install the new Power Supply Module and Power Status Module into the 900RPE

rack.

10 Mount the updated rack assembly and connect a separate power source with disconnect to the

new power supply.

Andere Handbücher für HC900

Andere Honeywell Controller Handbücher

Honeywell

Honeywell V4062A Bedienungsanleitung

Honeywell

Honeywell ML6874 Bedienungsanleitung

Honeywell

Honeywell CN34 Series Bedienungsanleitung

Honeywell

Honeywell EVOTOUCH CONTROLLER Bedienungsanleitung

Honeywell

Honeywell MicroniK 200 R7426D Installationshandbuch

Honeywell

Honeywell SMARTBOX Bedienungsanleitung

Honeywell

Honeywell DC1010 Bedienungsanleitung

Honeywell

Honeywell HC900 Betriebsanleitung

Honeywell

Honeywell ML6161E Bedienungsanleitung

Honeywell

Honeywell S9240F2051 Bedienungsanleitung

Honeywell

Honeywell UMC800 Bedienungsanleitung

Honeywell

Honeywell 5000 Series Bedienungsanleitung

Honeywell

Honeywell SUPER TRADELINE S8610U Bedienungsanleitung

Honeywell

Honeywell CD3200 Bedienungsanleitung

Honeywell

Honeywell TRADELINE SmartValve SV9602P Bedienungsanleitung

Honeywell

Honeywell V800 Bedienungsanleitung

Honeywell

Honeywell Design and Application Produkthandbuch

Honeywell

Honeywell S8600B Bedienungsanleitung

Honeywell

Honeywell ML6275 Bedienungsanleitung

Honeywell

Honeywell UMC800 Bedienungsanleitung

Honeywell

Honeywell INCOMM L510 Bedienungsanleitung

Honeywell

Honeywell Excel 10 W7751H Bedienungsanleitung

Honeywell

Honeywell ML6421 Bedienungsanleitung

Honeywell

Honeywell UDC 2300 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung