Honeywell HCE 60 Betriebsanleitung

Storey

Controller

HCE 60

Installation and Operation

Contents

Overview 3

Application 3

Installation procedure 4

Classifying zones and actuators 4

Installation 4

Configuration and electrical connection 4

Start-up 4

Creating a zoning plan 5

Determining temperature zones 5

Filling out zoning plan 6

Installation 10

Wall installation 11

DIN rail installation 12

Installing Hometronic components 12

Configuration and electrical connection 13

Opening housing 14

Cabling connections 16

Start-up 26

Preparing for start-up 26

LED indicators on storey controller 28

Operating modes of storey controller 29

Buttons 30

Cooling function 30

Contents

Assigning zones and issuing room names 32

Example: Assigning an HCW 22 setpoint adjuster to

zone 1 32

Example: Assigning room name LIVING to zone 1 34

Assigning wireless setpoint adjuster HCU 30 to a

temperature zone 36

Assigning setpoint adjusters of type HCW 23 to a zone 37

Assigning room names for cooling function 37

Canceling assignment 38

Deleting assignment of a room name at the Hometronic

Manager 39

Saving settings on Hometronic Manager 40

Checking configuration 40

Checking wireless transmission 41

Checking assignment of room names 42

Displaying faults 42

Completing start-up 43

Resetting storey controller to state of delivery 44

Appendix 45

Glossary 45

Help with problems 46

Overview of Hometronic heating components 49

Zoning plan 50

Notes 52

Overview

For your information

Technical terms are explained in the glossary (Page 45). They are

identified in the text by an *.

Application

The storey controller HCE 60 receives information on the temperature

of the room from the setpoint adjusters* and the Hometronic Man-

ager. Using this information, the storey controller regulates the boiler

feedback*, the pump relay*, and the thermal actuators* (see Page 48,

Hometronic heating components).

It has a self-learning controller (fuzzy logic) which automatically ad-

justs itself to the ambient conditions. The desired room temperature is

reached quickly and then maintained.

A sticker has been included on the back for a quick overview of the

display and operation. It can be attached to the housing of the storey

controller.

Overview

Installation procedure

Classifying zones and actuators

•Determine which heating circuits* are controlled by the storey

controller.

Installation

•Install Hometronic components.

Configuration and electrical connection

•Set the storey controller to the actuator type, attach cables to the

respective connections and connect components together.

Start-up

•Assign setpoint adjusters and any room temperature sensors to the

temperature zones.

•Assign room names at the Hometronic Manager if necessary.

•Assign the time program of the wireless setpoint adjuster HCU 30

to the temperature zones if necessary.

Creating a zoning plan

A temperature zone is an area of the building, e.g. a room, in which

the setpoint temperature* is set with a setpoint adjuster. The storey

controller controls all thermal actuators of a temperature zone identi-

cally.

5 temperature zones can be set up for each storey controller. The

expansion module HCS 60 increases the number of temperature

zones for each storey controller to 8. A maximum of 3 actuators can

be connected in each zone.

Thus the total number of actuators which can be controlled by one

storey controller is limited to 24.

Determining temperature zones

Caution

Damage caused by equipment from other manufac-

turers!

The storey controller was designed for use with com-

ponents from Honeywell only!

►Use only H 200 BG (closed without current) or H 200 BO (open

without current)-type actuators.

►Group actuators (by type and location) which are managed by the

storey controller.

►Group together all actuators which are controlled by a setpoint ad-

juster in a temperature zone.

Creating a zoning plan

For more than 8 temperature zones or 24 actuators:

►Determine the number of additional storey controllers required using

the following table:

Temperature

zones (maximum)

Actuators

(maximum)

No. of

storey controllers

824 1

16 48 2

24 72 3

The example at the end of this section shows zone divisions

with corresponding zoning plan.

Filling out zoning plan

►Copy the sample zoning plan (see Appendix, Page 50) (archive it).

►Enter the type and installation location of the respective actuator in

each temperature zone.

►Assign a setpoint adjuster to each temperature zone.

►Assign room names if necessary.

►Hand over the zoning plan to the customer after installation.

Creating a zoning plan

Example of zone divisions

1, 2 etc. = Zone

A = Living room E = Bedroom

B = Dining room F = WC

C = Kitchen G= Bathroom

D= Hall

Creating a zoning plan

This example shows:

•The living area is covered by 6 temperature zones. The additional

module HCS 60 is required for this partitioning.

•A total of 8 actuators are controlled by the storey controller.

Up to 8 temperature zones can be controlled by the additional module

HCS 60. Planned temperature zones are generated in gray.

The room names for each temperature zone are entered at

the Hometronic Manager.

Inhaltsverzeichnis

Andere Honeywell Controller Handbücher

Honeywell

Honeywell Mini-AT Bedienungsanleitung

Honeywell

Honeywell SSW2-1M Bedienungsanleitung

Honeywell

Honeywell ML6874 Bedienungsanleitung

Honeywell

Honeywell Satronic DVI 980 Bedienungsanleitung

Honeywell

Honeywell HR 10 F Bedienungsanleitung

Honeywell

Honeywell UDC3300 Bedienungsanleitung

Honeywell

Honeywell ControLinks R7999A Bedienungsanleitung

Honeywell

Honeywell Spyder 7 Bedienungsanleitung

Honeywell

Honeywell DBC2000 Series Bedienungsanleitung

Honeywell

Honeywell DBC2000E10 Series Bedienungsanleitung

Honeywell

Honeywell UDC2500 Bedienungsanleitung

Honeywell

Honeywell ML9185 Bedienungsanleitung

Honeywell

Honeywell CENTRA LINE EAGLEHAWK Installations- und Betriebshandbuch

Honeywell

Honeywell MS4120F Bedienungsanleitung

Honeywell

Honeywell ML6275 Bedienungsanleitung

Honeywell

Honeywell Spyder PUL1012S Bedienungsanleitung

Honeywell

Honeywell M847D Bedienungsanleitung

Honeywell

Honeywell SP907B Bedienungsanleitung

Honeywell

Honeywell ML6174 Series Bedienungsanleitung

Honeywell

Honeywell Excel 10 Bedienungsanleitung

Honeywell

Honeywell ControLinks R7999C Bedienungsanleitung

Honeywell

Honeywell M6410C/L Bedienungsanleitung

Honeywell

Honeywell VU443A Bedienungsanleitung

Honeywell

Honeywell VR8300 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch