Honeywell HFT-3108B Bedienungsanleitung

IMPORTANT SAFETY

INSTRUCTIONS

READ AND SAVE THESE SAFETY

INSTRUCTIONS BEFORE USING

THIS FAN

When using electrical appliances, basic

precautions should always be followed to

reduce the risk of fire, electric shock, and

injury to persons, including the following:

1. Use this fan only as described in this manual.

Other use not recommended, may cause fire,

electric shock or injury to persons.

2. This product is intended for household use

ONLY and not for commercial, industrial or

outdoor use.

3. To protect against electric shock, do not place

fan in window, immerse unit, plug or cord in

water or spray with liquids.

4. This appliance has a polarized plug (one

blade is wider than the other). To reduce the

risk of shock, this plug is intended to fit only

one way in a polarized outlet. If the plug does

not fit fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified

electrician. DO NOT attempt to defeat this

safety feature.

5. Close supervision is necessary when any

appliance is used by or near children.

6. Turn the fan to the OFF position and unplug the

fan from the outlet when not in use, when

moving the fan from one location to another

and before cleaning.

7. To disconnect the fan, first turn control to the

OFF position, grip the plug and pull it from the

wall outlet. Never pull by the cord.

8. Do not operate the fan in the presence of

explosive and/or flammable fumes.

9. Do not place the fan or any parts near an

open flame, cooking or other heating

appliance.

10. Do not operate the fan with a damaged cord

or plug or if the product malfunctions, is

dropped or damaged in any manner (see

warranty).

11. Avoid contact with moving fan parts.

12. The use of attachments not recommended by

the manufacturer may be hazardous.

13. Place the fan on a dry level surface.

14. Do not hang or mount fan on ceiling. Do not

operate HFT-114B/HFT-114BC series in

oscillation mode when wall-mounted. The

HF-810/HF-819 series cannot be wall mounted.

15. Do not operate if the fan housing is removed

or damaged.

16. A loose fit between the AC outlet (receptacle)

and plug may cause overheating and a

distortion of the plug. Contact a qualified

electrician to replace loose or worn outlet.

WARNING: To Reduce The Risk of Fire or

Electric Shock, Do Not Use This Fan With Any

Solid-State Speed Control Device.

Owner’s Manual

TURBO FORCE®/TECH FORCE

HIGH VELOCITY CIRCULATORS

HT-800 Series, HT-900 Series, HT-900C Series,

HFT-114B Series, HFT-311B Series, HFT-314 Series,

and HT-9004C

HFT-3108B/HFT-3108BC

Combo Package of HFT-311B/HFT-311BC and

HT-800/HT-809 Fans

HFT-3112B

Twin Package of 2 HFT-311B Series Fans

HFT-3114B/HFT-3114BC

Combo Package of HFT-311B/HFT-311BC and

HFT-114B/HFT-114BC Fans

HFT-8108B

Combo Package of HT-800/HT-809 and HF-810/HF-819 Fans

HT-8002/HT-8002C

Twin Package of 2 HT-800/HT-809 Fans

The Turbo Force®High Velocity Air Circulator Fans are aerodynamically

designed to give you the versatility of changing this fan's angular direction

simply by adjusting the fan to ANY desired angular output (Fig.1). Upon using

this fan, you will feel a strong and powerful air stream that will quickly move

air in order to cool an area rapidly and efficiently.

INTRODUCTION

Fig. 1

FOR ENERGY

SAVINGS ALL YEAR

Honeywell Air Circulator Fans can help save energy and can

lower monthly utility bills all year round. Our air circulators

increase distribution of cooler air from your air conditioner or

warmer air from your heating system creating a vortex of air

flow for increased comfort. Increased air flow allows the air

conditioning and heating systems to be used at lower settings

to help save you money.

In the summer:

Circulate cool

air by using

with window

or central air

conditioning.

Circulate cool

air upstairs.

In the winter:

Circulate warm

air. Position

your air

circulator in an

open location

for upward air

movement. Run

it on a low

setting to move

the hotter air

from the ceiling

and circulate

the warmer air

throughout the

room.

Increase Heating Source Efficiency: Use

with other heat sources, such as wood stoves,

baseboard heaters, and or vents to help

circulate the warm air throughout the room.

Box, packaging materials and all plastic parts are recyclable.

Contact your local recycler for more details.

OPERATION

• Be sure the fan is in the OFF position.

• Place your fan on a dry, level surface.

• Plug the power cord into a polarized 120 volt AC wall outlet.

• To operate, turn the control knob to the desired fan speed: HIGH (III), MEDIUM (II) or LOW (I) (Fig. 2).

NOTE: The HF-810/HF-819 Series fans are equipped with a child-resistant speed control.

To operate, push in and turn the child-resistant switch to the desired speed (Fig. 2A).

• Adjust the fan to the desired angular air output direction.

• To start or stop the oscillation feature (

HFT-114B Series and HFT-314 Series

), press the

OSCILLATE button on the base of the fan (Fig. 3).

• To move the fan, turn the fan OFF and pick it up by the concealed handle that is located on the

outside rim of the fan (Fig. 4).

Fig. 3

WALL MOUNTING (HT-800, HT-900, HFT-114B/HFT-114BC Series and HFT-311B/HFT-311BC Series Only)

• Locate and mark the position on the wall where the fan will be mounted (preferably at a wall stud).

• Insert two screws into the wall stud. (Screws are not included and can be purchased at a

hardware store)

• Leave approximately 3/8” of the screws (bolts) exposed.

• Line up the openings on the base of the fan with the screws (bolts) and hang the fan on the wall.

NOTE: Do not operate HFT-114B/HFT-114BC Series in oscillation mode when the fan is

wall-mounted. The HF-810/HF-819 Series and HFF-561U Series cannot be wall-mounted.

Fig. 2 Fig. 4Fig. 2A

CLEANING AND STORAGE

• Turn the fan off and unplug it before cleaning.

• Use only a soft cloth or cotton swab to gently wipe the fan clean.

• To clean between the grilles, we recommend using a pipe cleaner, vacuum cleaner, flexible

dustwand or compressed air to gently remove the dust.

• DO NOT immerse the fan in water and never allow water to drip into the motor housing.

• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.

REMOVAL OF THE FRONT GRILLE FOR CLEANING

DO NOT remove the fan grille unless the fan’s power is turned off

and the power cord is unplugged.

• Gently lay the fan face down on a table (Fig. 5).

• Remove the front grille by unscrewing the screws located on the back of the fan

using a standard phillips head screw driver ( ).

NOTE: The screws will remain attached to the rear housing to ensure they are

not lost. Do not try to force the removal of the screws

• Lift the rear housing by the handle to separate from the front grille.

• Re-assemble the fan by replacing the front grille and aligning the screw holes between the front grille

and the fan body. Gently tighten the screws.

• For storage, clean the fan carefully as instructed. Store the fan in the original packaging or cover the

product to protect it from dust.

Fig. 5

Dieses Handbuch passt für folgende Modelle

Andere Honeywell Lüfter Handbücher

Honeywell

Honeywell HY-200 Series Bedienungsanleitung

Honeywell

Honeywell HS-0016 Bedienungsanleitung

Honeywell

Honeywell HT-109E Bedienungsanleitung

Honeywell

Honeywell HSF600BE Bedienungsanleitung

Honeywell

Honeywell HYF1101E Bedienungsanleitung

Honeywell

Honeywell GLEN ALDEN Bedienungsanleitung

Honeywell

Honeywell HV-180 Bedienungsanleitung

Honeywell

Honeywell Lynton 51852 Bedienungsanleitung

Honeywell

Honeywell HT-908 Series TECH FORCE Bedienungsanleitung

Honeywell

Honeywell HSF600B Bedienungsanleitung

Honeywell

Honeywell HV-120 Series Montageanleitung

Honeywell

Honeywell Turbo Force HYF500 Series Bedienungsanleitung

Honeywell

Honeywell Glencrest Bedienungsanleitung

Honeywell

Honeywell HT-380BP - High Velocity Air Circulator Floor... Bedienungsanleitung

Honeywell

Honeywell HT-216E Bedienungsanleitung

Honeywell

Honeywell HS-2007 Series Bedienungsanleitung

Honeywell

Honeywell PERFECT WINDOW HR150 Bedienungsanleitung

Honeywell

Honeywell TURBO FORCE HT-910 Series Bedienungsanleitung

Honeywell

Honeywell HSF1640 Series Bedienungsanleitung

Honeywell

Honeywell DY-012 Series Bedienungsanleitung

Honeywell

Honeywell HS-160R Series Bedienungsanleitung

Honeywell

Honeywell HZ-0300 - Allseason Comfort Fan Bedienungsanleitung

Honeywell

Honeywell EASTOVER 10214 Bedienungsanleitung

Honeywell

Honeywell HFT-311B Series Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung