Honeywell HCM-646 - Humidifier With Electronic... Bedienungsanleitung

OWNER’S MANUAL

3 US GALLONS (11.3 LITERS)

OUTPUT PER DAY

COOL MOISTURE HUMIDIFIERS

MODELS:

HCM-630

HCM-635

The Honeywell trademark is used by Kaz, Inc. under license from Honeywell Intellectual Properties, Inc.

4 US GALLONS (15.1 LITERS)

OUTPUT PER DAY

COOL MOISTURE HUMIDIFIERS

MODELS:

HCM-645

HCM-646

HCM-650

035-04034-000_R0 QuietCare OM 6/24/04 4:04 PM Page 1

When using electrical appliances, basic precautions should always be

followed to reduce the risk of fire, electric shock, and injury to persons,

including the following:

1. Always place this humidifier on a firm, flat and level surface. This humidifier may not work properly

on an uneven surface.

2. Place this humidifier in an area where it is not accessible to children.

3. Do not place the humidifier near any heat sources such as stoves, radiators, and heaters.

4. Do not use the humidifier outdoors.

5. Before using the humidifier, check the power cord for any signs of damage. If the cord is found to be

damaged, DO NOT USE and return the humidifier to the manufacturer under the warranty agreement

for repair.

6. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock,

this plug is intended to fit only one way in a polarized outlet. If the plug does not fit securely in the

outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat

this safety feature.

7. To disconnect the humidifier,first turn controls to the OFF position, then grip the plug and pull it from

the wall outlet. Never pull by the cord.

8. A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the

plug. Contact a qualified electrician to replace loose or worn outlet.

9. The humidifier should always be unplugged and emptied when not in operation or while being

serviced or cleaned.

10. Never tilt or attempt to move the humidifier while it is operating or filled with water. UNPLUG the

humidifier before moving.

11. This humidifier requires regular cleaning. Refer to the CLEANING instructions provided. Never clean

the humidifier in any manner other than as instructed in this manual.

12. Do not direct moisture flow directly at individuals, walls or furniture.

13. When a humidifier is used in a closed room or small rooms, check periodically for proper ventilation,

as excessive humidity can cause condensation stains on walls.

14. Turn the humidifier OFF if you notice moisture on the inside of your windows. For proper humidity

reading use a hygrometer,which is available in many hardware and department stores, or by

ordering one from the manufacturer.

IMPORTANT SAFETY

INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS

BEFORE USING THIS HUMIDIFIER

035-04034-000_R0 QuietCare OM 6/24/04 4:04 PM Page 2

Introduction

HOW DOES IT WORK?

COOL MOISTURE SYSTEM:

Dry air is pulled through the humidifier and the QuietCare™fan blows out invisible, moisture-balanced air.

Unwanted minerals and bacteria from the water are trapped inside the filter. When the unit is running you

will not see or feel a “mist”. You will know your humidifier is putting moisture into the air as you watch the

water level in your tank decrease throughout the day.

COMPLETE

PROTECTION

Your new QuietCare™humidifier has double Protec™Product Protection with the exclusive Protec™

Cleaning Cartridge and Protec™treated filter.

Protec™Cleaning Cartridge: Your humidifier has been designed with the Protec™Cleaning Cartridge which

helps your unit to stay cleaner longer. This unique cartridge features an advanced patented media which

continually inhibits the growth of odor-causing bacteria and mold in the cartridge as well as prevents the

buildup of slime in your humidifier. In addition, the Protec™cartridge provides peace of mind that the mist

is fresh and clean.

Protec™Antimicrobial Treated Filter: Your filter has been treated with Protec™antimicrobial which helps

prevent surface growth and migration of mold, fungus and bacteria in the filter for it’s life – approximately

one season. Keep in mind, depending on your water quality, mineral deposits can still clog or discolor the

filter, affecting its life and that of the humidifier.

Your humidifier is made up of these parts:

Water Tank

Motor Housing

Filter

Base

Fill Cap

Protec™Cleaning

Cartridge Holder

035-04034-000_R0 QuietCare OM 6/24/04 4:04 PM Page 3

Set-Up

NOTE: We recommend that the humidifier be disinfected prior to first use.

Please see CLEANING INSTRUCTIONS.

Select a firm, level, flat location - at least six inches (15 cm) from any wall for proper air flow (Fig. 1). Place

the humidifier on a water-resistant surface, as water can damage furniture and some flooring.

Kaz will not accept responsibility for property damage caused by water spillage.

Filling

• Remove the water tank by grasping handle and pulling straight up. Set

aside (Fig. 1).

• Lift up on the motor housing to remove and set aside (Fig. 2). Remove the

filter from the base before filling the unit with water. Soak filter in a sink

full of cool water to help reduce mineral buildup and place back in the

humidifier while wet. DO NOT SQUEEZE OR WRING OUT THE FILTER. To

help extend the life of your filter, repeat this step each time you fill your

humidifier.

• Turn the Water Tank upside down so that the Fill Cap is facing up;

unscrew the Fill Cap by turning it counter-clockwise and set aside.

• Fill the Water Tank with COOL tap water (Fig. 3). Distilled water is not

necessary as the water is filtered by the filter.DO NOT USE HOT WATER.

Doing so may damage the humidifier.

•Replace the fill cap by turning it clockwise .

DO NOT OVER-TIGHTEN. Turn the Water Tank right-side up.

NOTE: When carrying the filled Water Tank please use the handle and

place your other hand under the tank for additional support.

• Place the Motor Housing back into the base.

• Position the Water Tank in the humidifier and push into place. Some water

will empty into the base.

• Once the filled tank has been positioned, do not attempt to move the

humidifier. If it has to be moved, unplug the humidifier and remove the

water tank first.

CAUTION: DO NOT POUR WATER INTO THE GRILLE IN THE

FRONT OF THE HUMIDIFIER. DOING SO MAY DAMAGE THE

HUMIDIFIER OR CAUSE PERSONAL INJURY.

Fig. 1

Fig. 2

Fig. 3

WALL

035-04034-000_R0 QuietCare OM 6/24/04 4:04 PM Page 4

Manual Control Operation (Model HCM-630)

POWER

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH

WET HANDS AS AN ELECTRICAL SHOCK COULD

OCCUR.

• With the power switch in the OFF position, plug the filled

humidifier into a polarized 120V outlet. DO NOT FORCE THE

POLARIZED PLUG INTO THE OUTLET; it will only fit one way.

OUTPUT / FAN SPEED CONTROL

1. Set the fan speed to the desired position (Fig. 4).

HIGH: For fast humidifying

MED: For everyday moisture control

LOW: For minimum operation (ideal for nighttime use)

2. Set the Advanced Mist™Humidistat on HIGH, by turning the dial clockwise to the end (Fig. 4).

Turn the humidifier OFF if the humidity level feels too moist or you notice condensation forming on the

walls and/or windows.

ADVANCED MIST™HUMIDISTAT

The Advanced Mist™Humidistat allows you to adjust and select the humidity level to your personal

preference. Your humidifier will turn on and off throughout the day and night to maintain the desired

humidity level you have selected.

HOW TO SET THE HUMIDISTAT

First, run the humidifier per the operation instruction with the

Humidistat knob set to its highest setting, turning the knob

clockwise to the end (Fig. 4).

•Let the humidifier run on high for a least one hour or until

your room has reached a comfortable humidity level.

• At this point, slowly turn your Humidistat knob counter-

clockwise until the humidifier shuts off and the Desired

Humidity light illuminates (Fig. 5).

• Now that your Humidistat knob is set, the humidifier will

automatically turn back on when your room drops below

your comfort setting and will automatically turn off again

when the setting is reached.

NOTE: If the humidifier fan will not start or restart when you select a fan speed, the Advanced Mist™

Humidistat may be set too low.Turn the dial clockwise to the end (Fig. 4). The Desired Humidity light

will turn Off when the unit is producing moisture. When the Desired Humidity light turns ON, you have

reached optimal humidity.

Desired

Humidity

Light

Fig. 4

Fig. 5

Fan

Speed

Knob

Power

Light

(Illuminated)

Desired

Humidity

Light

(Illuminated)

Humidistat

Knob

Power

Light

(Illuminated)

035-04034-000_R0 QuietCare OM 6/24/04 4:04 PM Page 5

EasySet™Control Operation (Models HCM-635, HCM-645, HCM-646)

POWER

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH

WET HANDS AS AN ELECTRICAL SHOCK COULD

OCCUR.

• With the power OFF, plug the filled humidifier into a

polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG

INTO THE OUTLET; it will only fit one way.

STEP 1: POWER

• Press the Power button to start the humidifier. Your

humidifier will automatically start on High power, continuous

run (Fig. 6).

• To turn your humidifier OFF simply press the Power button

again.

STEP 2: OUTPUT / FAN SPEED CONTROL

Your unit has three output levels/fan speeds:

HIGH: For fast humidifying

MED: For everyday moisture control

LOW: For minimum operation (ideal for nighttime use)

• Push the up button (+) to increase output level and push the

down button (-) to decrease output level. The LED's will

illuminate to reflect which speed you have selected (Fig. 7).

STEP 3: SET HUMIDITY

• Set your desired humidity anywhere between 35% and

55%.

• Push the up button (+) to increase desired humidity and

push the down button (-) to decrease desired humidity. The

LED's will illuminate to reflect which desired humidity level

you have selected (Fig. 8).

For example: If you set your humidity at 40%, the 35% and

40% LED’s will be illuminated.

• Once you have set your desired humidity, the unit will

operate under this desired setting until the unit is turned off.

• When the desired room humidity has been reached the unit

will automatically shut off. (The humidity LED's will remain

illuminated)

• Your unit will turn back on when your desired humidity

decreases beyond your set level.

Fig. 6

Fan Speed

Control

Humidistat

Control

Power

Button

Fig. 7

Fig. 8

035-04034-000_R0 QuietCare OM 6/24/04 4:04 PM Page 6

POWER

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH

WET HANDS AS AN ELECTRICAL SHOCK COULD

OCCUR.

• With the power OFF, plug the filled humidifier into a

polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG

INTO THE OUTLET; it will only fit one way.

STEP 1: POWER

• Press the Power button to start the humidifier. Your

humidifier will automatically start on High power, continuous

run. The display will be illuminated and will reflect the

current room humidity (Fig. 9).

• To turn your humidifier OFF simply press the Power button

again.

STEP 2: OUTPUT / FAN SPEED CONTROL

Your unit has three output levels/fan speeds:

HIGH: For fast humidifying

MED: For everyday moisture control

LOW: For minimum operation (ideal for nighttime use)

• To change your fan speed press the fan button up or down

(Fig. 10).

• Once you have selected your desired speed the display will

go back to showing the current room humidity after 3

seconds.

STEP 3: TIMER CONTROL

• You can set your timer for up to 18 hours. This function

should only be used if you desire that the humidifier be

automatically shut off after a certain period of time.

• Press the timer button up or down to set your desired time

(Fig. 11).

• When the display indicates your desired time, it will begin

counting down after 3 seconds. The display will then switch

back to showing the current room humidity.

NOTE: If you wish to change your timer setting or check to

see how much time is left simply press the timer button

once and it will show you the time left. If you want to

change the time remaining, continue to push the button up

or down until you have reached your desired time. Again,

after 3 seconds the display will revert to showing the current room humidity.

Digital EasySet™Control Operation (Model HCM-650)

Fig. 9

Fig. 10

Fig. 11

Humidistat

Control

Fan Speed

Control

Timer

Control

Desired

Humidity

Light

035-04034-000_R0 QuietCare OM 6/24/04 4:04 PM Page 7

STEP 4: SET HUMIDITY

• You can set your desired humidity in 1% increments

anywhere from 30% to 60%.

• To set your desired humidity, press the humidity button up

or down (Fig. 12).

• When the display indicates your desired humidity setting

wait 3 seconds.

• After 3 seconds your desired humidity is set and the display

will revert back to showing the current room humidity.

NOTE: If you wish to change your humidity setting or check

to see what you set, simply press the humidity button once

and it will show you the set humidity. If you want to change

it, continue to push the button up or down until you have

reached your new desired humidity. Again, after 3 seconds

the display will revert to showing the current room humidity.

• Once you have set your humidity the unit will operate under

this desired setting until the unit is turned off.

• When your desired room humidity has been reached your

unit will shut off and the house icon on the top of your

display will illuminate (Fig. 13). It will stay illuminated until

your desired humidity decreases at which time your unit will

turn back on.

Digital EasySet™Control Operation (Model HCM-650)

Fig. 12

The Protec™Cleaning Cartridge will last 30 days or longer, depending on your usage. To install or replace

your cartridge, simply remove the holder on the inside of your tank cap by turning it

counter-clockwise . Replace the cartridge holder by by turning it clockwise (Fig. 14 & Fig. 15).

Protec™Cleaning Cartridge

Fig. 14 Cartridge

Holder

Protec™

Cleaning

Cartridge

Tank Cap

Fig. 15

Fig. 13

035-04034-000_R0 QuietCare OM 6/24/04 4:04 PM Page 8

Cleaning

STEP ONE:

SCALE REMOVAL

BASE

1. Fill the Base with:

• 1 cup (8 ozs.) of undiluted white vinegar

• Honeywell®Humidifier Cleaner,part no.

HAC-101, following bottle instructions.

2. Let solution stand for 20 minutes.

3. With the vinegar or Honeywell®Humidifier

Cleaner in the Base, clean all interior

surfaces with a soft cloth or brush to help

remove scales.

4. Rinse the Base thoroughly with water to

remove scale and cleaning solution.

STEP TWO:

DISINFECTING

WATER TANK/BASE

1. Fill the Water Tank with:

•1 teaspoon of household bleach

and

•1 gallon of water

Pour some of this solution into the Base.

2. Let solution stand for 20 minutes.

3. Rinse with water until the smell of bleach is

gone.

NOTES:

• The use of other water treatment products and chemicals may cause deterioration of the filter or

damage the humidifier, thereby hindering the humidifier's effectiveness.

• If you are experiencing more buildup than when you first purchased your humidifier, you may need to

replace your Protec™Cleaning Cartridge. Changing your cartridge every 30 days will provide continuous

protection.

Your Protec™Cleaning Cartridge helps your humidifier stay cleaner longer and will help extend the life of

your filter. However, you should still continue to clean your humidifier regularly as needed.

Cleaning involves two steps, SCALE REMOVAL and DISINFECTING. Be sure to perform these in the

proper order to avoid harmful chemical interactions.

• First, turn off and unplug the humidifier.

• Remove the Water Tank and Motor Housing.

•Remove the filter from the Base.

• Empty any water from the Base.

NOTE: REMOVE FILTER AND PROTEC™CLEANING CARTRIDGE BEFORE CLEANING.

Failure to remove filter during cleaning will destroy the filter.

035-04034-000_R0 QuietCare OM 6/24/04 4:04 PM Page 9

End-of-Season Care and Storage

• Follow the CLEANING instructions when the humidifier will not be used for at least one week or more,

or at the end of the season.

• At the end of the season, remove and throw away the filter and Protec™Cleaning Cartridge; do not store

with a used filter.

• Dry the humidifier completely before storing. DO NOT store with water inside the Base or Water Tank.

• Pack the unit in its original carton and store in a cool, dry location.

• Before next use, remember to clean your humidifier, install a new filter and new Protec™Cleaning

Cartridge.

Consumer Relations

Mail questions or comments to:

Kaz, Inc.

Consumer Relations Dept.

250 Turnpike Road

Southborough, MA 01772

Please be sure to specify model number.

Call us toll-free at: 1-800-332-1110

E-mail: [email protected]

Or visit our website at: www.kaz.com

Purchase replacement filter part number HAC-504 and Protec™Cleaning Cartridge part number

PC-1 (1 pack) or PC-2 (2 pack)

Electrical Ratings

The Honeywell QuietCare™Series models are rated at 120V,60 Hz.

NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE RETURN THE HUMIDIFIER TO THE ORIGINAL PLACE

OF PURCHASE OR SEE YOUR WARRANTY. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING

YOURSELF. DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE HUMIDIFIER OR

PERSONAL INJURY.

035-04034-000_R0 QuietCare OM 6/24/04 4:04 PM Page 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Luftbefeuchter Handbücher

Honeywell

Honeywell TRADELINE HE360 Kurzanleitung

Honeywell

Honeywell TRADELINE HE360 Bedienungsanleitung

Honeywell

Honeywell HUL520 Bedienungsanleitung

Honeywell

Honeywell HE360A - Whole House Powered Humidifier Bedienungsanleitung

Honeywell

Honeywell HWM-4000 Series Bedienungsanleitung

Honeywell

Honeywell HWM440WC Bedienungsanleitung

Honeywell

Honeywell REFLECTION HUL900BC Bedienungsanleitung

Honeywell

Honeywell Enviracaire Elite HE365A Kurzanleitung

Honeywell

Honeywell TrueSTEAM HM612A1000/U Bedienungsanleitung

Honeywell

Honeywell HCM300T - Quiet Care 3.0 Gallon Ultraviolet Tower... Bedienungsanleitung

Honeywell

Honeywell TrueSTEAM Bedienungsanleitung

Honeywell

Honeywell HEV685B Bedienungsanleitung

Honeywell

Honeywell TRADELINE HE360 Handbuch

Honeywell

Honeywell HM750 Bedienungsanleitung

Honeywell

Honeywell HE360A - Whole House Powered Humidifier Bedienungsanleitung

Honeywell

Honeywell HE360A1027 Bedienungsanleitung

Honeywell

Honeywell HM700A1000 Bedienungsanleitung

Honeywell

Honeywell HWM910 - ENVIRACAIRE Warm Moisture 2 Gallon... Bedienungsanleitung

Honeywell

Honeywell HE220 Bedienungsanleitung

Honeywell

Honeywell HCM-750 Bedienungsanleitung

Honeywell

Honeywell HE120 Bedienungsanleitung

Honeywell

Honeywell Enviracaire Elite HE365A Bedienungsanleitung

Honeywell

Honeywell HE440A Bedienungsanleitung

Honeywell

Honeywell HE105 Bedienungsanleitung

Beliebte Luftbefeuchter Handbücher anderer Marken

Bionaire

Bionaire CM1 Handbuch

Air-O-Swiss

Air-O-Swiss AOS 7131 Handbuch

KING

KING K 5002 Rainbow Bedienungsanleitung

Crane

Crane EE-6902 Bedienungsanleitung

Glaziar

Glaziar Ness Bedienungsanleitung

Philips

Philips DreamStation Go Abmessungen

Stadler Form

Stadler Form Hera Bedienungsanleitung

Hunter

Hunter 31206 Bedienungsanleitung

TaoTronics

TaoTronics TT-AH004 Bedienungsanleitung

adorini

adorini Cigar Heaven Bedienungsanleitung

Lanaform

Lanaform Aroma Bedienungsanleitung

Aprilaire

Aprilaire 800 Series Bedienungsanleitung

Pyle

Pyle SereneLife PHUMDIF8 Bedienungsanleitung

Trotec

Trotec B 200 Bedienungsanleitung

Pure Humidifier

Pure Humidifier EC Series Bedienungsanleitung

Crane

Crane EE-864 Bedienungsanleitung

air&me

air&me Solnan Bedienungsanleitung

weewell

weewell WHC730 Bedienungsanleitung