Honeywell Farenhyt Series Technisches Handbuch

RA-2000/RA-2000GRAY

Remote Annunciator

Product Installation Document

Document 151443:D 2/7/2022 ECN: 151770

Farenhyt™ Series

1 Description

The RA-2000/GRAY is an optional 4x40 remote annunciator that can be

surface or flush-mounted.RA-2000 is the red model. RA-2000GRAY is

the gray model.

1.1 Compatibility

The RA-2000/GRAY is compatible with the Honeywell’s Farenhyt

Series FACPs. For more information, refer to the FACP Manual.

1.2 Specifications

2 Installation

1. Ensure power is turned off at the panel.

2. Mount the RA-2000/GRAY in the desired location. See Section 2.1.

3. Connect the RA-2000/GRAY to the panel. See Figure 5.

4. Use the DIP switches on the back of the RA-2000/GRAY to assign

an ID number. Refer to the FACP manual.

5. The RA-2000/GRAY module must be added to the system through

FACP programming. JumpStart can be used to automatically add

the module or it may be added manually. Refer to the FACP Manual

for more information.

2.1 Mounting

2.1.1 Flush Mounting

Follow these steps to flush mount the RA-2000/GRAY.

1. The backbox dimensions are 9.25” W x 8.375” H. The minimum

depth required is 2". Mount the backbox using the mounting holes

shown below.

2. Remove knockouts as needed for wires. There are 10 knockouts

available, two on each side and two in the back of the cabinet.

3. Wire the annunciator board to the main control panel as shown in

Figure 5.

4. Attach the annunciator and door assembly to back box as shown

below using the supplied screws.

Operating Voltage: 24VDC

Current Standby Current: 27mA

Alarm Current: 53mA

Operating Temperature: 32° to 120° F (0° to 49° C)

Dimensions Flush Mount: Overall:

12.25” W x 11.5” H x 0.875” D

(31.1 cm W x 29.2 cm H x 2.2 cm D)

Backbox: 9.25” W x 8.375”H

(23.5cm W x 21.27cm H)

Surface Mount: Including trim ring:

12.25” W x 11.5” H x 3.0” D

(31.1 cm W x 29.2 cm H x 7.6 cm D)

Table 1 Specifications

BACK BACK BACK

NEXT NEXT NEXT

Model RA-2000

Farenhyt™ Series

Figure 1 RA-2000 Remote Annunciator

mounting holes

Figure 2 RA-2000/GRAY Backbox Mounting

Figure 3 Attaching Annunciator/Door Assembly

Honeywell Security & Fire

12 Clintonville Road

Northford, CT 06472-1610

203.484.7161

www.farenhyt.com

151443 | D | 02-22

2.1.2 Surface Mounting

The RA-100TR Red Trim Ring kit and RA-100TG Gray Trim Ring kit

are available for use when surface mounting the RA-2000/GRAY.

1. Remove the desired knockout.

2. Mark and pre-drill hole in the wall for the center top keyhole

mounting bolt. Refer to Figure 2 for mounting hole locations.

3. Install center top fastener in the wall with the screw head

protruding.

4. Place backbox over the top screw, level and secure.

5. Mark and drill the left and right upper and lower mounting holes.

6. Install remaining fasteners and tighten.

7. Run wires to the control panel. Refer to Figure 5.

8. Place the trim ring over the back box as shown below.

9. Attach the door assembly to the backbox using the screws

provided. Refer to Figure 3.

3 Wiring Connections

Wire the RA-2000/GRAY to the FACP as shown in below.

Figure 4 Installing Trim Ring

SBUS OUT

–+AB

S– S+ AB

12345

DIP Switches

remote annunciator

(back view)

supervised,

power-limited,

Class B

Figure 5 SBUS Connections

Andere Handbücher für Farenhyt Series

Dieses Handbuch passt für folgende Modelle

Andere Honeywell Industrieanlagen Handbücher

Honeywell

Honeywell HON 512 Betriebsanleitung

Honeywell

Honeywell F-BO-AFE70 Series Leitfaden

Honeywell

Honeywell Gent Vigilon Plus Bedienungsanleitung

Honeywell

Honeywell MILLER 81004170 Bedienerhandbuch

Honeywell

Honeywell TA3840 Bedienungsanleitung

Honeywell

Honeywell MS-9200UDLS Bedienungsanleitung

Honeywell

Honeywell BA300 Series Montageanleitung

Honeywell

Honeywell COMBISAFE Bedienungsanleitung

Honeywell

Honeywell GENT COMPACT-MAINS-DAU Schulungshandbuch

Honeywell

Honeywell Enraf 1010 CB Betriebsanleitung

Honeywell

Honeywell JADE W7220 Bedienungsanleitung

Honeywell

Honeywell Miller SkyORB Benutzerhandbuch

Honeywell

Honeywell RRD Bedienungsanleitung

Honeywell

Honeywell HS-700 Bedienungs- und Montageanleitung

Honeywell

Honeywell Q3400A Bedienungsanleitung

Honeywell

Honeywell PATROL 1b Bedienungsanleitung

Honeywell

Honeywell Modutrol IV 41 Series Bedienungsanleitung

Honeywell

Honeywell VR9105V Bedienungsanleitung

Honeywell

Honeywell R8991 Bedienungsanleitung

Honeywell

Honeywell HERMetic Bedienungsanleitung

Honeywell

Honeywell NOTIFIER NBG-12WL Bedienungsanleitung

Honeywell

Honeywell MICRO SWITCH GLL Series Bedienungsanleitung

Honeywell

Honeywell Q3300 Bedienungsanleitung

Honeywell

Honeywell Industrial HERMetic Sampler GTX Chem Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung