Honeywell 6150RF - Ademco Deluxe Fixed Keypad/Receiver Bedienungsanleitung

K4461-1V1 4/05 Rev. A

ADEMCO 6150RF

Keypad/Transceiver

USER GUIDE

Keypad Features

DISPLAY

The keypad features a 2-digit numeric display for zone identification and pre-designated English-

language prompts (e.g., “ALARM,” “AWAY,” “STAY,” “CHECK,” etc.) for indicating system status. See

Figure 1.

FUNCTION KEYS

The function keys are located behind a decorative door and are continuously backlit for ease in use.

(Check the User’s Guide that accompanies the control panel for detailed instructions on the use of these

keys.)

The function keys include keys for panic alarm activation. The panic alarms are activated by pressing

key pairs [1] & [*], [3] & [#], or [*] & [#], or a Special Function Key (see below). Whether these panic keys

function and the type of panic alarms they produce is determined by the control panel’s capability and

programming. (Check with your installer for the availability and type of alarm of these panic keys.)

SOUNDER

The sounder is a piezo-electric sounder that pulses for fire alarms and generates a two-tone sound for

burglary and audible panic alarms.

KEYPAD LEDS

The keypad contains two LEDs that indicate the status of the system as follows:

LED Function

Green Lights when the system is ready to arm (no zone faults are present).

Red Lights when the system is armed.

SPECIAL FUNCTION KEYS

These are four keys located to the left of the numeric keys (see Figure 1). The keys may be programmed

by your installer for panic alarms or other special functions such as macros (a frequently used series of

key entries). Function keys must be held down for at least 2 seconds to activate an alarm.

(Check with your installer for the programmed function of these keys.)

OFF

MAX

INSTANT

READY

AWAY

TEST

CODE

STAY

BYPASS

CHIME

ARMED

READY

6150RF-00-001-V1

Figure 1: ADEMCO 6150RF Keypad/Transceiver with Front Door Removed

ÊK4461-1V1eŠ

K4461-1V1 4/05 Rev. A

User Mode

This mode gives you the capability of enabling and disabling individual wireless keys that have been

directly programmed into the ADEMCO 6150RF. This is particularly useful if a user loses a wireless

key.

This mode may only be accessed if the ADEMCO 6150RF is powered up for at least 1 minute.

Only wireless keys programmed directly into the ADEMCO 6150RF may be enabled and

disabled using this mode.

ENTER THE USER MODE

Press the [1] and [3] keys simultaneously for a few seconds (make sure the unit has been

powered for at least 1 minute prior).

CHANGING THE STATUS OF A TRANSMITTER

On the display, “dE” and “-” flashes alternately. Enter the number of the wireless key

transmitter (1-8).

Then “d” and the wireless key number you entered flash alternately with “1” or “0” on the

display. A “1” indicates the wireless key is enabled, a “0” indicates it is disabled. Enter [1] to

enable or [0] to disable the wireless key. All wireless keys are defaulted to 1 (enabled).

Press the [✳

✳✳

✳]to accept the entry.

Repeat the procedure for all the wireless keys whose status you want to change.

EXITING THE USER MODE

To exit the User mode press [✳

✳✳

✳]when “dE” and “–” flash alternately on the display.

165 Eileen Way, Syosset, New York 11791

www.honeywell.com/security

Inhaltsverzeichnis

Andere Honeywell Tastenfeld Handbücher

Honeywell

Honeywell 6271C - Ademco TouchCenter Color Keypad Bedienungsanleitung

Honeywell

Honeywell CLB800HF Bedienungsanleitung

Honeywell

Honeywell 6280 Series Bedienungsanleitung

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Montageanleitung

Honeywell

Honeywell ADEMCO 6150RF Montageanleitung

Honeywell

Honeywell EKZ017200C Bedienungsanleitung

Honeywell

Honeywell ADEMCO 6160RF Montageanleitung

Honeywell

Honeywell SiX Series Bedienungsanleitung

Honeywell

Honeywell 6270 - Ademco TouchCenter Keypad Bedienungsanleitung

Honeywell

Honeywell ADEMCO 6152RF Montageanleitung

Honeywell

Honeywell Ademco 6160PX Montageanleitung

Honeywell

Honeywell Accentic proX2 Service-Handbuch

Honeywell

Honeywell ADEMCO 6150RF ADEM Montageanleitung

Honeywell

Honeywell ADEMCO 6271CV Bedienungsanleitung

Honeywell

Honeywell ADEMCO 5828 Montageanleitung

Honeywell

Honeywell Galaxy TouchCenter Plus Bedienungsanleitung

Honeywell

Honeywell 6280 Series Bedienungsanleitung

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Montageanleitung

Honeywell

Honeywell Lyric LKP500-ENC Montageanleitung

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Montageanleitung

Honeywell

Honeywell 6280 TouchCenter Bedienungsanleitung

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Montageanleitung

Honeywell

Honeywell ADEMCO 5828 Bedienungsanleitung

Honeywell

Honeywell ADEMCO 6160RF Bedienungsanleitung

Beliebte Tastenfeld Handbücher anderer Marken

ACT

ACT ACT PRO 1030 Bedienungsanleitung

Cardin

Cardin SSB Series Bedienungsanleitung

Harman Kardon

Harman Kardon KP 1 Bedienungsanleitung

Chamberlain

Chamberlain KPR2000 Benutzerhandbuch

CYP

CYP CR-KP1 Bedienungsanleitung

Aeware

Aeware k-35 Series Referenzhandbuch

Aritech

Aritech CS-175 Series Bedienungsanleitung

GE NetworX NX-1600E Series Bedienungsanleitung

Lenze AC Tech

Lenze AC Tech MC SERIES Bedienungsanleitung

Burg Wächter

Burg Wächter secuENTRY 7711 Bedienungsanleitung

Aeware

Aeware in.k450 Bedienungsanleitung

Lenze

Lenze EPM-H410 Bedienungsanleitung

Toshiba

Toshiba RKP007Z Bedienungsanleitung

Gemini

Gemini GEM-DXK1 KEYPAD Bedienungsanleitung

Russound

Russound MDK-C5 Betriebsanleitung

Bosch

Bosch D1260 Series Bedienungsanleitung

Elmes Electronic

Elmes Electronic KB1 Bedienungsanleitung

Clare Controls

Clare Controls ClareOne CLR-C1-PNC Montageanleitung