Honeywell ADEMCO 6271V Bedienungsanleitung

User Guide

K10498 8/05 Rev. A

Table of Contents

ABOUT THE TOUCHCENTER ............................................................................ 4

Introduction.................................................................................................... 4

The TouchCenter Interface............................................................................ 4

Navigating through the TouchCenter............................................................. 5

About Your Home Screen.............................................................................. 5

TouchCenter "Arming" Screen....................................................................... 7

SYSTEM OVERVIEW........................................................................................... 9

Introduction to Your System .......................................................................... 9

Burglary Protection ........................................................................................ 9

Partitions

................................................................................................ 9

Zones

..................................................................................................... 9

Entry/Exit Delays

.................................................................................. 10

Alarms

.................................................................................................. 10

Memory of Alarm

.................................................................................. 10

Fire Protection ............................................................................................. 10

User Codes.................................................................................................. 11

Extended Functionality ................................................................................ 11

Safe Mode ................................................................................................... 11

SECURITY SYSTEM OPERATION.................................................................... 13

Introduction to Security System Operation .................................................. 13

How to Arm the System............................................................................... 13

How to Arm Multiple Partitions..................................................................... 15

How to Display Faults.................................................................................. 16

How to Bypass Zones.................................................................................. 18

How to Remove Bypassed Zones ............................................................... 21

How to Disarm the System .......................................................................... 23

How to Check the Status of Other Partitions ............................................... 26

How to Send Emergency Messages............................................................ 28

How to View the Event Log ......................................................................... 29

FIRE ALARM SYSTEM OPERATION................................................................ 31

Introduction to Fire Alarm System Operation............................................... 31

In Case of Fire Alarm................................................................................... 31

Silencing and Clearing a Fire Alarm ............................................................ 31

USER CODE SETUP ......................................................................................... 33

Table of Contents (Cont'd)

Introduction to User Code Setup ................................................................. 33

Authority Levels........................................................................................... 33

How to Access User Setup.......................................................................... 34

How to Add a User ...................................................................................... 35

How to Delete a User .................................................................................. 39

How to Edit a User....................................................................................... 40

ADVANCED SYSTEM FEATURES ................................................................... 42

Introduction to Advanced System Features................................................. 42

Console Emulation Mode ............................................................................ 42

How to Enter Console Emulation Mode....................................................... 42

VOICE MESSAGES ........................................................................................... 44

Introduction to Recording and Retrieving Messages ................................... 44

Recording a Voice Message........................................................................ 45

Retrieving and Deleting a Voice Message................................................... 46

SUMMARY OF TOUCHCENTER LED OPERATION ........................................ 47

TouchCenter LED Operation ....................................................................... 47

TOUCHCENTER SETUP ................................................................................... 48

How to Access TouchCenter Setup Options................................................ 48

How to Access Setup .................................................................................. 48

How to Adjust the Touch Screen Contrast................................................... 50

How to Adjust the Volume ........................................................................... 51

How to Select Screen Backlight Off Activation Time ................................... 52

How to Select Homepage After Time .......................................................... 54

How to Set the Time and Date..................................................................... 56

TOUCHCENTER OPERATING MODES............................................................ 60

Operating Modes (Chime, Voice, and Voice Chime) ................................... 60

How to Access Operating Modes ................................................................ 60

MAINTAINING YOUR SYSTEM......................................................................... 62

How to Clean your TouchCenter ................................................................. 62

Routine Care ............................................................................................... 63

GLOSSARY ....................................................................................................... 64

About the TouchCenter

Introduction

Congratulations on your ownership of an Honeywell Security System.

You've made a wise decision in choosing it, for it represents the latest

in security protection technology today.

This security system offers you burglary protection and may provide

fire and emergency protection. To realize the full potential of the

system, it is important that you feel comfortable operating it. Your

system may consist of:

•One or more TouchCenter Keypads

•One or more other keypads for system control

•Various sensors for perimeter and interior burglary protection,

plus a selected number of strategically placed smoke or

combustion detectors

•Lighting/switching devices.

The home lighting feature has not been evaluated by UL.

The system uses microcomputer technology to monitor all zones, and

provides appropriate information for display on the TouchCenter

and/or other keypads used with the system. Your system may also

have been programmed to automatically transmit alarm or status

messages over the phone lines to a central alarm monitoring station.

The TouchCenter Interface

The TouchCenter is an intuitive, graphical interface that combines

security and optionally, home lighting control. With clear, simple

controls on a touch-screen interface, the entire family will find the

TouchCenter both easy to learn and easy to use.

As a security and home-automation interface, the TouchCenter may

be used for:

•Quick and easy security system operation

•Message storage and retrieval

•Home lighting control

About the TouchCenter (Cont'd)

Navigating through the TouchCenter

Navigation through the TouchCenter typically begins from the

"Home" screen. This is the TouchCenter’s main default screen

(starting screen) and is the first screen you will see when the

TouchCenter is powered up and initialized. It is from this screen that

you will select from the main menu. Once you have made your

selection, you will navigate through various sub-menus by touching

buttons or icons to perform the function you desire.

About Your Home Screen

Your "Home" screen is the gateway to your TouchCenter Keypad.

From this screen you can:

•control your security system, and optionally,

•control your message center, and

•control the premises lighting.

The home lighting feature has not been evaluated by UL.

Your "Home" screen is displayed most of the time, except when you

select another screen option.

The background and buttons shown on the “Home” screen in this

manual are for example only. Your system installer may have changed

the actual background and buttons shown on your “Home” screen.

About the TouchCenter (cont'd)

Navigation Icon Descriptions

To aid in the navigation of the TouchCenter, a set of user-friendly

icons has been provided. The appearance, function, and location of

these icons is described below:

ICON LOCATION FUNCTION

"Home"

screen

Allows you to record and retrieve voice

messages.

"Home"

screen

Allows you to turn certain devices on and

off (if installed and programmed by your

installer.)

"Home"

screen

Accesses "Arming" screen.

Note: The lock symbol in the button

indicates security system status.

Unlocked– system disarmed

Locked– system armed

Upper left

corner of

most screens

Returns you to the TouchCenter "Home"

screen. This icon is called the Home

button within the text of this document.

Upper right

corner of

most screens

Reverts to the last screen viewed. This

icon is called the Back button within the

text of this document.

Lower right

corner of

screen

Displays Emergency functions (as

programmed by your installer). This icon

is called the Panic button within the text

of this document.

Note: This icon is displayed and active

on all screens except while in the Clean

Screen mode and during an LCD Display

test in Diagnostics.

About the TouchCenter (Cont'd)

TouchCenter "Arming" Screen

From the "Home" screen, press SECURITY to access the TouchCenter

"Arming" screen. Use this picture and the table that follows to

become familiar with the TouchCenter security functions.

Note: The Voice Status ( ) button causes the TouchCenter to

announce system status if depressed at least 10 seconds following its

last depression. Note that Voice must be enabled for this button to

function correctly during an alarm condition.

ITEM FUNCTION

AWAY

Press this button to arm when no one will be staying on the

premises. When armed in AWAY, the system will sound an

alarm if a protected door or window is opened, or if any

movement is detected inside the premises. You may leave

through the entrance door during the exit delay period without

causing an alarm. You may also re-enter through the entrance

door, but must disarm the system with your User Code within the

entry delay period or an alarm will occur.

STAY

Press this button to arm when you are staying home, but might

expect someone to use the entrance door later.

When armed in STAY, the system will sound an alarm if a

protected door or window is opened, but you may otherwise

move freely throughout the premises. Late arrivals can enter

through the entrance door without causing an alarm, but they

must disarm the system within the entry delay period or an alarm

will occur.

Note: On some residential systems, if you press the Voice

Status Icon while armed in the Stay Mode, the exit delay time will

restart (if the feature was enabled by your installer).

About the TouchCenter (cont'd)

ITEM FUNCTION

NIGHT Press this button to arm when you are staying home and do not

expect anyone to use the entrance door.

Your installer may have

configured NIGHT Mode differently; have him/her describe the

actual settings of this mode.

Multi-

Partitions

Check this circle when you want to arm more than one partition.

When Multi-Partitions is checked, all partitions within the system

can be armed at one time (if the user is so authorized). When

the Arm Multi-Partitions circle does not contain a check mark,

each partition must be armed individually. Note: This option may

not be shown for some single partition systems.

CHOICES

Press this button for more Security, Lighting, and TouchCenter

setup features.

System Troubles

The “Arming” screen also displays an Icon(s) if a system trouble(s)

occurs. The system trouble Icon is displayed to the left of the Panic

button. If a trouble Icon is shown, contact your alarm company. The

following Icons may be shown as applicable to your system:

ICON MEANING

AC Loss – The system is not receiving AC power.

Bell Failure – The system bell or siren has a problem. Note: This Icon

will be displayed when interfacing with residential panels only.

Expander Failure – The system has a failure in an expansion module.

Low Battery – The system battery, that powers the system during an

AC power loss, is low.

LRR Supervision Failure – The Long Range Radio or Alarmnet –I

used to communicate with the central station has a supervision

failure. Note: This Icon will be displayed when interfacing with

residential panels only.

Pager Failure – The system cannot communicate with an assigned

pager.

Phone Line 1 Failure – The system is not able to communicate with

the central monitoring station over the primary phone line.

Phone Line 2 Failure – The system is not able to communicate with

the central monitoring station over the secondary phone line.

Wireless Failure – The system is not able to communicate with its

wireless devices.

System Overview

Introduction to Your System

This system offers you burglary protection and may offer fire and

emergency protection. Monitoring is accomplished with various

contact and motion sensors for perimeter and interior burglary

protection, plus the system may have strategically placed smoke,

heat, or combustion detectors.

Burglary Protection

The burglary protection portion of your system must be turned on or

"armed" before it will sense burglary alarm conditions. Your system

provides three modes of burglary protection: Away, Stay, and Night,

and even allows you to “bypass” selected zones of protection while

leaving the rest of the system armed (e.g. this enables you to arm the

system but leave upper-story windows open.)

The system also provides a Chime mode and Voice mode, for alerting

users to the opening and closing of doors and windows even while the

system is disarmed.

Partitions

This system may be configured to arm and disarm more than one

area, each as if it had its own control. These areas are called

partitions. Partitions are used when the user wants to disarm certain

areas while leaving other areas armed, or to limit access to certain

areas to specific individuals. Each user of the system can be

authorized to operate all or only some partitions, and can be given

different privileges in each. Information about Partitions is

presented later in this document.

Zones

Your system's sensing devices have been assigned to various "zones."

For example, the sensing device on your Entry/Exit door may have

been assigned to zone 01, sensing devices on windows in the master

bedroom to zone 02, and so on. These numbers will appear on the

display, along with an alpha descriptor for that zone (if programmed),

when an alarm or trouble condition occurs.

System Overview (cont'd)

Entry/Exit Delays

Your system has preset time delays, referred to as exit delay and

entry delay. Whenever you arm your system, exit delay gives you

time to leave through the designated exit door without setting off an

alarm. Exit delay begins immediately after entering any arming

command, and applies to all modes of arming protection. If

programmed, a slow beeping will sound throughout the exit delay

period. Additionally if programmed, a rapid beeping may sound

during the final 10 seconds of the exit delay period.

Note: On some systems, pressing the Voice Status Icon restarts the

exit delay. Refer to your control panel User Guide to see if this is

applicable on your system.

Entry delay gives you time to disarm the system when you reenter

through the designated entrance door. But the system must be

disarmed before the entry delay period ends, or an alarm will occur.

The keypad will beep during the entry delay period, reminding you to

disarm the system. Ask your installer about the delay times

programmed into your system.

Alarms

When an alarm occurs, the TouchCenter (and any other keypads) and

external sounders will sound, and the zone(s) causing the alarm are

displayed. If your system is connected to a central monitoring station,

an alarm message will also be sent. To stop the alarm sounding,

simply disarm the system.

Memory of Alarm

When an alarm condition occurs, the number(s) of the zone(s) that

caused the problem are displayed, along with the type of alarm. These

remain displayed until cleared.

Note: If you change screens, the alarm in memory can be viewed and

cleared by selecting the Display Faults button on the Arming Screen.

Fire Protection

The optional fire protection portion of your security system (if used) is

always on and will sound an alarm if a fire condition is detected.

Note: If a fire or smoke detector develops a low battery, a “Fire

Maintenance” message is displayed. To determine which zone is

causing the problem, go to “Display Faults” to determine which zone

has the low battery indication.

Inhaltsverzeichnis

Andere Honeywell Tastenfeld Handbücher

Honeywell

Honeywell Lyric LKP500-EN Montageanleitung

Honeywell

Honeywell ADEMCO 6149ex Montageanleitung

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Montageanleitung

Honeywell

Honeywell GKP-S8M Bedienungsanleitung

Honeywell

Honeywell ADEMCO 6152RF Montageanleitung

Honeywell

Honeywell Ademco 6160PX Montageanleitung

Honeywell

Honeywell 6271C - Ademco TouchCenter Color Keypad Bedienungsanleitung

Honeywell

Honeywell Ademco 6164US Montageanleitung

Honeywell

Honeywell ADEMCO 6150RF Montageanleitung

Honeywell

Honeywell PINpad RE252 Bedienungsanleitung

Honeywell

Honeywell SiX Series Bedienungsanleitung

Honeywell

Honeywell 6270 - Ademco TouchCenter Keypad Bedienungsanleitung

Honeywell

Honeywell 6162 Betriebsanleitung

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Montageanleitung

Honeywell

Honeywell 5828 Montageanleitung

Honeywell

Honeywell ADEMCO 5828V Bedienungsanleitung

Honeywell

Honeywell 6160AP Bedienungsanleitung

Honeywell

Honeywell Accentic proX2 Service-Handbuch

Honeywell

Honeywell ADEMCO 6162 Bedienungsanleitung

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Montageanleitung

Honeywell

Honeywell Lyric LKP500-ENC Montageanleitung

Honeywell

Honeywell ADEMCO 5839 Bedienungsanleitung

Honeywell

Honeywell CLB800HF Bedienungsanleitung

Honeywell

Honeywell 6280W Installations- und Betriebshandbuch

Beliebte Tastenfeld Handbücher anderer Marken

ACT

ACT ACT PRO 1030 Bedienungsanleitung

Cardin

Cardin SSB Series Bedienungsanleitung

Harman Kardon

Harman Kardon KP 1 Bedienungsanleitung

Chamberlain

Chamberlain KPR2000 Benutzerhandbuch

CYP

CYP CR-KP1 Bedienungsanleitung

Aeware

Aeware k-35 Series Referenzhandbuch

Aritech

Aritech CS-175 Series Bedienungsanleitung

GE NetworX NX-1600E Series Bedienungsanleitung

Lenze AC Tech

Lenze AC Tech MC SERIES Bedienungsanleitung

Burg Wächter

Burg Wächter secuENTRY 7711 Bedienungsanleitung

Aeware

Aeware in.k450 Bedienungsanleitung

Lenze

Lenze EPM-H410 Bedienungsanleitung

Toshiba

Toshiba RKP007Z Bedienungsanleitung

Gemini

Gemini GEM-DXK1 KEYPAD Bedienungsanleitung

Russound

Russound MDK-C5 Betriebsanleitung

Bosch

Bosch D1260 Series Bedienungsanleitung

Elmes Electronic

Elmes Electronic KB1 Bedienungsanleitung

Clare Controls

Clare Controls ClareOne CLR-C1-PNC Montageanleitung