Honeywell SmartVFD HVAC2 Gebrauchsanweisung

31-00108-07

APPLICATION MANUAL

SmartVFD HVAC2

2 31-00108—07

Safety ................................................................................................................................................................................. 3

Receipt of delivery ........................................................................................................................................................ 7

Installation ...................................................................................................................................................................... 9

Commissioning and Start-Up Wizard .................................................................................................................. 40

Fault tracing .................................................................................................................................................................... 43

SmartVFD HVAC2 Application Interface ............................................................................................................. 51

Control panel .................................................................................................................................................................. 55

Navigation on the SmartVFD HVAC2 control panel ....................................................................................... 60

STANDARD application parameters ...................................................................................................................... 72

Parameter descriptions .............................................................................................................................................. 124

Technical data ................................................................................................................................................................ 181

Part Numbers, Power Ratings, Size, and Weight .............................................................................................. 186

Accessories ...................................................................................................................................................................... 193

3 31-00108—07

NOTE: You can download the English and French product manuals with applicable safety, warning

and caution information from www.customer.honeywell.com.

REMARQUE : Vous pouvez télécharger les versions anglaise et française des manuels produit

contenant l’ensemble des informations de sécurité, avertissements et mises en garde

applicables sur le site

www.customer.honeywell.com.

SAFETY

CAUTION

ONLY A COMPETENT ELECTRICIAN IS

ALLOWED TO CARRY OUT THE

ELECTRICAL INSTALLATION!

This manual contains clearly marked

cautions and warnings which are intended

for your personal safety and to avoid any

unintentional damage to the product or

connected appliances.

Please read the information included in cautions

and warnings carefully:

Warnings

WARNING

The components of the power unit of the

frequency converter are live when

SmartVFD HVAC2 is connected to mains.

Coming into contact with this voltage is

extremely dangerous and may cause

death or severe injury. The control unit is

isolated from the mains potential.

4 31-00108—07

WARNING

The motor terminals U, V, W (T1, T2, T3)

and the possible brake resistor terminals

- / + are live when SmartVFD HVAC2 is

connected to mains, even if the motor is

not running.

WARNING

The control I / O-terminals are isolated

from the mains potential. However, the

relay output terminals may have a

dangerous control voltage present even

when SmartVFD HVAC2 is disconnected

from mains.

WARNING

The earth leakage current of SmartVFD

HVAC2 frequency converters exceeds 3.5

mA AC. According to standard EN61800-

5-1, a reinforced protective ground

connection must be ensured.

WARNING

If the frequency converter is used as a

part of a machine, the machine

manufacturer is responsible for

providing the machine with a main

switch (EN 60204-1).

WARNING

If SmartVFD HVAC2 is disconnected

from mains while running the motor, it

remains live if the motor is energized by

the process. In this case the motor

functions as a generator feeding energy

to the frequency converter.

WARNING

After disconnecting the frequency

converter from the mains, wait until the

fan stops and the indicators on the

display go out. Wait 5 more minutes

before doing any work on SmartVFD

HVAC2 connections.

5 31-00108—07

WARNING

The motor can start automatically after a

fault situation, if the autoreset function

has been activated.

Safety instructions

CAUTION

The SmartVFD HVAC2 frequency

converter has been designed for fixed

installations only.

CAUTION

Do not perform any measurements when

the frequency converter is connected to

the mains.

CAUTION

Do not perform any voltage withstand

tests on any part of SmartVFD HVAC2.

The product safety is fully tested at

factory.

CAUTION

Prior to measurements on the motor or

the motor cable, disconnect the motor

cable from the frequency converter.

CAUTION

Do not open the cover of SmartVFD

HVAC2. Static voltage discharge from

your fingers may damage the

components. Opening the cover may

also damage the device. If the cover of

SmartVFD HVAC2 is opened, warranty

becomes void.

6 31-00108—07

Earthing and earth fault

protection

The SmartVFD HVAC2 frequency converter must

always be earthed with an earthing conductor

connected to the earthing terminal. See figure

below:

Fig. 1. MI1 - MI3

Fig. 2. MI4

Fig. 3. MI5

• The earth fault protection inside the frequency

converter protects only the converter itself

against earth faults.

• If fault current protective switches are used

they must be tested with the drive with earth

fault currents that are possible to arise in fault

situations.

MCR36496

MCR36497

MCR36498

7 31-00108—07

Before running the motor

Checklist:

Before starting the motor, check that the motor

is mounted properly and ensure that the

machine connected to the motor allows the

motor to be started.

Set the maximum motor speed (frequency)

according to the motor and the machine

connected to it.

Before reversing the motor shaft rotation

direction make sure that this can be done

safely.

Make sure that no power correction capacitors

are connected to the motor cable.

RECEIPT OF DELIVERY

After unpacking the product, check that no signs

of transport damages are to be found on the

product and that the delivery is complete

(compare the type designation of the product to

the code below).

Should the drive have been damaged during the

shipping, please contact primarily the cargo

insurance company or the carrier.

If the delivery does not correspond to your order,

contact the supplier immediately.

Storage

If the frequency converter is to be kept in store

before use make sure that the ambient conditions

are acceptable:

Storing temperature -40 °F (-40 °C)…+70 °F

(21 °C)

Relative humidity < 95%, no condensation

Maintenance

In normal operating conditions, SmartVFD

HVAC2 frequency converters are maintenance-

free. However, regular maintenance is

recommended to ensure a trouble-free operating

and a long lifetime of the drive. We recommended

to follow the table below for maintenance

intervals.

8 31-00108—07

* Only for frame 4 and frame 5

Capacitor recharge

After a longer storage time the capacitors need to

be recharge in order to avoid capacitor damage.

Possible high leakage current through the

capacitors must be limited. The best way to

achieve this is to use a DC-power supply with

adjustable current limit.

1. Set the current limit to 300…800 mA

according to the size of the drive.

2. Then connect the DC-power supply to the

input phase L1 and L2.

3. Then set the DC-voltage to the nominal DC-

voltage level of the (1.35*Un AC) and supply

the converter for at least 1 h.

Table 1.

Maintenance interval Maintenance action

Whenever necessary Clean heatsink*

Regular Check tightening torques of terminals

12 months (If stored) Check input and output terminals and control I / O terminals.

Clean cooling tunnel.*

Check operation of cooling fan, check for corrosion on terminals,

busbars and other surfaces.*

6 - 24 months (depending on

environment) Check and clean and clean cooling fans:

Main fan*

Interminal fan*

9 31-00108—07

If DC-voltage is not available and the unit has

been stored much longer than 12 months

deenergized, consult the factory before

connecting power.

Warranty

Only manufacturing defects are covered by the

warranty. The manufacturer assumes no

responsibility for damages caused during or

resulting from transport, receipt of the delivery,

installation, commissioning or use.

The manufacturer shall in no event and under no

circumstances be held responsible for damages

and failures resulting from misuse, wrong

installation, unacceptable ambient temperature,

dust, corrosive substances or operation outside

the rated specifications. Neither can the

manufacturer be held responsible for

consequential damages.

Variable frequency drive devices (VFD) and

accessories: new products for thiry-six (36)

months from date of installation. All VFD warranty

return products must have prior authorization

(Form No. 87-0284) and be returned only to the

VFD Service Center in Chambersburg, PA.

INSTALLATION

Mechanical installation

There are two possible ways to mount SmartVFD

HVAC2 in the wall. For MI1-MI3, either screw or

DIN-rail mounting; For MI4-MI5, screw or flange

mounting.

Fig. 4. Screw mounting, MI1 - MI3

MI3

MI1

=M4

MI2

=M5

LOC

REM

BACK

RESET

M36500

LOC

REM

BACK

RESET

LOC

REM

BACK

RESET

10 31-00108—07

Fig. 5. Screw mounting, MI4 - MI5

NOTE: See the mounting dimensions on the

back of the drive. More details in Chapter.

Fig. 6. DIN-rail mounting, MI1 - MI3

Fig. 7. Flange mounting, MI4 - MI5

MI4

MI5

LOC

REM

BACK

RESET

M36501

=M 6

LOC

REM

BACK

RESET

M36502

M36503

LOC

REM

BACK

RESET

Inhaltsverzeichnis

Andere Honeywell Medienkonverter Handbücher

Honeywell

Honeywell RPWL3045A Bedienungsanleitung

Honeywell

Honeywell PC-502 Bedienungsanleitung

Honeywell

Honeywell INNCOM B578 Bedienungsanleitung

Honeywell

Honeywell Elster EK280 Bedienungsanleitung

Honeywell

Honeywell SiX Series Bedienungsanleitung

Honeywell

Honeywell HUSS-E4V Bedienungsanleitung

Honeywell

Honeywell ACU Bedienungsanleitung

Honeywell

Honeywell TWM 9000 Verdrahtungsschema

Honeywell

Honeywell Elster EK280 Gebrauchsanweisung

Honeywell

Honeywell HUSS-E1 Bedienungsanleitung

Honeywell

Honeywell 04200-A-1201 Bedienungsanleitung

Honeywell

Honeywell S1 Bedienungsanleitung

Honeywell

Honeywell HNVE1 Bedienungsanleitung

Honeywell

Honeywell NX series Bedienungsanleitung

Honeywell

Honeywell HVE1 Bedienungsanleitung

Honeywell

Honeywell ACU Bedienungsanleitung

Honeywell

Honeywell EK205-M Bedienungsanleitung

Honeywell

Honeywell SiX Series Bedienungsanleitung

Honeywell

Honeywell N568X Gebrauchs- und Pflegehandbuch

Honeywell

Honeywell TWM 9000 Bedienungsanleitung

Honeywell

Honeywell HLR1001 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung