Honeywell GENT S4-BASE-PROGRAM Installationshandbuch

This S-Quad programming tool

(S4-BASE-PROGRAM) is used test and program

S-Quad speech products.

Definitions

Phrase - A phrase is a file that contains the

information from a wave file and additional

information such as a description of the speech or

sound.

Image - An image is a collection of Phrases and

other information that can be used to program a

sounder.

Project - A project is a description that refers to a

specific site or customer e.g. Heathrow Terminal 1

or Walkabout Inns.

Article - An Article is a part number for an image.

For example article number for the standard

English audio file for S-Quad is PA020001. For

each article number there is an associated version

number.

Downloading software

and Image files

An S-Quad Speech product can be programmed

using a software called 'tools4sounderApp' using

image file.

a. Go to GentExpert web application at the

following web address:

http://www.gentexpert.co.uk/ and follow the

instructions on the initial page to enter the

application.

b. Create a directory structure in which to store

the downloaded files. Below is a suggested

directory structure for software and standard

images.

c. Find setup.exe.zip 29/07/2005 file in

GentExpert and save it to the local software

directory. Find the required image file(s) in

GentExpert and save it to the local image

directory.

d. Unzip the program and Run setup.exe. By

default the program will install at

"C:\novar\tools\tools 4 Sounder\".

e. Once you have run the setup program you may

need to modify the COM PORT setting in the

tools4sounder.ini file (it defaults to COM1).

The SampleRate parameter should also be

changed to 13kHz.

4188-914.01_Part 2_04/07_Programming tool 1

Programming information

S-Quad Programming tool

(S4-BASE-PROGRAM)

by Honeywell

Red ring

Insert the correct plug (polarity does not matter)

INPUT 100-240V ~ / 180mA / 50 - 60Hz

OUTPUT 9V / 670mA Plug

COMM port

9-way

D type

Damage will occur if you fail to align

sensor markings to the markings on

the programming base .j

S-Quad

Programming base

1 x 9-way to 9-way

pe 1m lead

1 x Programming base

1 x PSU adaptor

Wiring and Power-up

a. Run the tools which will be located in START

menu -> Programs -> Novar -> tools 4

sounder -> tools 4 sounder(demo).

b. Connect the programming base to the PC with

the serial cable.

c. Insert an S-Quad device into the programming

base and power it up (it will emit a short beep if

this is successful).

How to test an S-Quad

Select the Sounder Only button to open the

Sounder Administrator page.

Select the Read Info button to transfer speech

information from the S-Quad to the PC.

It is now possible to see S-Quad details of the

phrases, the overall file description ("Identifier"), the

Article Number and the version.

Each phrase can be selected and tested individually

(it may be necessary to temporarily reduce the

volume whilst doing this with "Set" and the up/down

controls (the value is a percentage of the maximum)

but the volume will then need resetting after the test

is over).

How to program an

S-Quad

Select the Image Only button to call up the Image

Administration page.

Select the Open button browse and select the

required Image file (*.ims) to program into the

S-Quad. Once it has been opened you will be able to

see details of the phrases, the overall file description

("Identifier"), the Article Number and the version. This

can then be programmed into the S-Quad by

selecting the Program button.

When the programming has finished the S-Quad can

then be replaced with another S-Quad that is

required to be programmed and above sequence can

then be repeated.

Programming information S-Quad Programming tool

Gent by Honeywell reserves the right to revise this publication from time to time and make changes to the content hereof without

obligation to notify any person of such revisions of changes.

Hamilton Industrial Park, Waterside Road, Leicester LE5 1TN, UK Website: www.gent.co.uk

Telephone: +44 (0) 116 246 2000 Fax (UK): +44 (0)116 246 2300

2 4188-914.01_Part 2_04/07_S-Quad_Programming tool

by Honeywell

At the end of their useful life, the packaging,

product and batteries should be disposed of

via a suitable recycling centre and in

accordance with national or local legislation.

Do not dispose of with your normal household waste.

Do not burn.

WEEE Directive:

At the end of their useful life, the packaging,

product and batteries should be

disposed of via a suitable recycling centre.

Andere Honeywell Hauptplatine Handbücher

Honeywell

Honeywell ST9500C Bedienungsanleitung

Honeywell

Honeywell Gamewell FCI ILI-MB-E3 Technisches Handbuch

Honeywell

Honeywell GENT S4-INTERFACE-PROG Bedienungsanleitung

Honeywell

Honeywell ST9400C Bedienungsanleitung

Honeywell

Honeywell ST799 Bedienungsanleitung

Honeywell

Honeywell ST9400S Bedienungsanleitung

Honeywell

Honeywell ST6400A Bedienungsanleitung

Honeywell

Honeywell ST9400S Betriebsanleitung

Honeywell

Honeywell ST6400S Bedienungsanleitung

Honeywell

Honeywell T5820XL Montage- und Wartungsanleitung

Honeywell

Honeywell N4300 Series Bedienungsanleitung

Honeywell

Honeywell ST6400A Bedienungsanleitung

Honeywell

Honeywell ST9400A Bedienungsanleitung

Honeywell

Honeywell DCP551 Mark ll Bedienungsanleitung

Honeywell

Honeywell 7720P Installationshandbuch

Honeywell

Honeywell IDENT-KEY 3 Gebrauchsanweisung

Honeywell

Honeywell SEK002 Bedienungsanleitung

Honeywell

Honeywell ST699 Bedienungsanleitung

Honeywell

Honeywell SEK001 Bedienungsanleitung

Honeywell

Honeywell ST699 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung