Honeywell ST9400S Betriebsanleitung

50029833-004 A

HOT WATER HEATING

GUIDE TO THE USE OF THE ST9400S PROGRAMMER:

The purpose of the Programmer is to control the times when the heating and hot water can be switched on.

MODE buttons Slider

Normal Use:

Lift the ﬂap to make sure the Slider is in the RUN position.

Also make sure that both hot water and heating are operating in AUTO or

ONCE mode, by pressing the MODE buttons repeatedly until the display

shows AUTO or ONCE.

AUTO means on and off twice each day, following the programme.

ONCE means coming on at the ﬁrst programme time then off at the last

programme time.

To turn the hot water and heating OFF:

(1) Keep pressing the hot water MODE button until the display shows that

hot water is OFF. If the hot water was on, the light will turn off.

(2) Keep pressing the heating MODE button until the display shows that

heating is OFF. If the heating was on, the light will turn off.

To turn the hot water and heating ON:

(1) Keep pressing the hot water MODE button until the display shows

CONT (this is short for continuous). The hot water light will turn on.

The hot water will not turn off in this position.

(2) Keep pressing the heating MODE button until the display shows

CONT (this is short for continuous). The heating light will turn on.

The heating will not turn off in this position.

Temporary Overrides to the Set Programme:

To turn the hot water ON press the hot water OVERRIDE button – the light

will turn ON, unless the hot water is operating in the OFF mode.

To turn the hot water OFF press the hot water OVERRIDE button again

– the light will turn OFF.

This button will only work in the AUTO or ONCE modes. It will NOT work

in the OFF or CONT modes.

At the next SET time the Programmer will go back to automatic

operation.

(The same applies to the heating OVERRIDE button)

For a temporary boost of heating or hot water, press the corresponding

EXTRA HOUR button.

Pressing once brings the heating or hot water ON for 1 hour.

Press twice for 2 hours extra, three times for 3 hours extra.

Pressing again will turn the heating OFF.

This button works in the AUTO, ONCE, and OFF modes. It will NOT work

in the CONT mode.

If the heating or hot water is already ON, pressing the corresponding

EXTRA HOUR button will add the extra hours to the end of the current

ON period.

For guidance on the operation of the other buttons please refer to the complete user instructions supplied with the

product.

Hot Water

OVERRIDE button

HOT WATER HEATING

EXTRA HOUR

OVERRIDE

EXTRA HOUR

OVERRIDE

DAY/TIME

HOT WATER

HEATING

RUN

ST9400S

(1) (2)

HOT WATER HEATING

EXTRA HOUR

OVERRIDE

EXTRA HOUR

OVERRIDE

Heating

OVERRIDE button

Hot Water

EXTRA HOUR button

HOT WATER HEATING

EXTRA HOUR

OVERRIDE

EXTRA HOUR

OVERRIDE

Heating

EXTRA HOUR button

BOILER SERVICE REMINDER:

By Law, your gas boiler should be inspected once a year to ensure it is operating safely. Your ST9400S Programmer

has a range of features designed to help make sure this service is carried out at the correct time.

These features will be programmed by your Installer, Maintenance Engineer or Landlord.

• A message can be displayed on the screen to remind you that a boiler service is due

• If the service is overdue, the Programmer may switch off the heating system, to ensure your safety.

Countdown to service:

Your Programmer can indicate a countdown for the number of days until

a service is due. This type of message will appear on the screen every

few seconds, to give you an opportunity to arrange a service visit.

What you should do:

• Arrange for a service visit before the service is due.

When service is due:

When your gas boiler service is OVERDUE the words “SERVICE DUE”

will continue to ﬂash on your screen.

What you should do:

• Arrange an immediate service visit.

Boiler shut-down:

If your Programmer shows the words “SERVICE DUE” and “OFF” then

your boiler service is OVERDUE and the boiler has been automatically

switched off to ensure your safety.

What you should do:

• Arrange an immediate service visit.

• If set to do so, it may be possible to obtain limited use of the boiler

by pressing any EXTRA HOUR button. Each button press will allow

operation of the boiler for 1 hour at a time, and the screen will show

the message “On 1h”

How to arrange a service visit:

• Your Landlord, Installer, or Maintenance Engineer should contact you

before the boiler service is due to allow you to arrange the service

visit. Their communication will include contact details.

• Contact details may also be found in the ST9400S User Guide, or may

be on an information sticker placed on or near the boiler.

• A contact telephone number may also have been programmed into

the Programmer. If so, a message will appear on the screen indicating

the number you should call.

Andere Handbücher für ST9400S

Inhaltsverzeichnis

Andere Honeywell Hauptplatine Handbücher

Honeywell

Honeywell 7720P Installationshandbuch

Honeywell

Honeywell ST699 Bedienungsanleitung

Honeywell

Honeywell SEK002 Bedienungsanleitung

Honeywell

Honeywell ST9400S Bedienungsanleitung

Honeywell

Honeywell ST799 Bedienungsanleitung

Honeywell

Honeywell ST9400C Bedienungsanleitung

Honeywell

Honeywell N4300 Series Bedienungsanleitung

Honeywell

Honeywell DCP551 Mark ll Bedienungsanleitung

Honeywell

Honeywell GENT S4-BASE-PROGRAM Installationshandbuch

Honeywell

Honeywell Gamewell FCI ILI-MB-E3 Technisches Handbuch

Honeywell

Honeywell ST9500C Bedienungsanleitung

Honeywell

Honeywell ST699 Bedienungsanleitung

Honeywell

Honeywell ST6400A Bedienungsanleitung

Honeywell

Honeywell T5820XL Montage- und Wartungsanleitung

Honeywell

Honeywell ST9400A Bedienungsanleitung

Honeywell

Honeywell ST6400S Bedienungsanleitung

Honeywell

Honeywell SEK001 Bedienungsanleitung

Honeywell

Honeywell GENT S4-INTERFACE-PROG Bedienungsanleitung

Honeywell

Honeywell IDENT-KEY 3 Gebrauchsanweisung

Honeywell

Honeywell ST6400A Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung