Honeywell TotalPlant LCN Benutzerhandbuch

LCN System Installation

SW20-500

LCN Installation

LCN System Installation

SW20-500

Release 510

CE Compliant

9/96

Revision 03 – September 23, 1996

While this information is presented in good faith and believed to be accurate,

Honeywell disclaims the implied warranties of merchantability and fitness for a

particular purpose and makes no express warranties except as may be stated in its

written agreement with and for its customer.

In no event is Honeywell liable to anyone for any indirect, special or consequential

damages. The information and specifications in this document are subject to

change without notice.

TDC 3000 and TotalPlant are U.S. registered trademarks of Honeywell Inc.

Other brand or product names are trademarks of their respective owners.

LCN System Installation 9/96

About This Publication

This publication provides instructions for use by the system hardware installation and checkout

personnel.

It is designed to help you determine if the system hardware is properly installed and ready for

system checkout. Use this publication any time the system is shut down for equipment

replacement, expansion, or relocation.

The checkout personnel should be familiar with the contents of the

TPS System Site Planning

manual and the

LCN Planning

manual in the

System Site Planning - 1

binder, and the

LCN System

Checkout

manual in the

LCN Installation

binder.

This publication supports TotalPlant Solution (TPS) System network Release 510 and CE

Compliant hardware. TPS is the evolution of TDC 3000X.

Any equipment designated as "CE Compliant" complies with the European Union

EMC and Health and Safety Directives. All equipment shipping into European Union

countries after January 1, 1996 require this type of compliance—denoted by the "CE

Mark."

Information about equipment manufactured before 1/01/96 has been moved to the respective

service manual.

Revision 3 has added the installation of the Classic Console Global User Station.

Change bars are used to indicate paragraphs, tables, or illustrations containing changes that

have been made by this update. Pages revised only to correct minor typographical errors

contain no change bars.

LCN System Installation 9/96

Standard Symbols

Scope The following defines standard symbols used in this publication.

ATTENTION Notes inform the reader about information that is required, but not

immediately evident.

CAUTION Cautions tell the user that damage may occur to equipment if

proper care is not exercised.

WARNING Warnings tell the reader that potential personal harm or serious

economic loss may happen if instructions are not followed.

53893

OR Ground connection to building safety ground

53894 Ground stake for building safety ground

53895

DANGER

SHOCK HAZARD

Electrical Shock Hazard—can be lethal

53896

DANGER

HIGH VOLTAGE

Electrical Shock Hazard—can be lethal

53897

Rotating Fan—can cause personal injury

Table of Contents

LCN System Installation i9/96

1 INTRODUCTION

1.1 Purpose and Scope

1.2 Reference Documents

1.3 Special Installation Tools and Test Equipment

2 SYSTEM INSTALLATION

2.1 Installation Overview

2.2 Preliminary Site Inspection

2.3 Storage

3 EQUIPMENT UNPACKING AND PLACEMENT

3.1 Equipment Unpacking

3.2 Equipment Placement

3.3 Equipment Preparation

3.4 Console Complexing—Universal Station Furniture

3.5 Console Complexing—Ergonomic Universal Station Furniture

3.5.1 Complexing for an Aced Configuration

3.5.2 Complexing for an Inline Configuration

3.5.3 Installing Cable Access Port Covers

3.6 LCN Cabling

3.6.1 LCN Cabling Rules

3.6.2 LCN Cable Connections

3.6.3 Coax Cabling Procedure

3.7 LCN Extender (LCNE) Cabling

3.8 Installation of Floating Engineer’s Keyboard

3.9 Interconnection of Peripherals Located in Separate Single Bay US Furniture

4 SYSTEM GROUNDING

4.1 Ground Wiring Overview

4.2 Grounding LCN Cabinets and Universal Stations

4.3 Grounding Universal Stations/Universal StationXs in Ergonomic Furniture

5 POWER ENTRY WIRING

5.1 Power Entry Box Wiring in Universal Station Furniture and Cabinets

5.2 Wiring Recommendation—Universal Station (US)

5.3 Wiring Recommendation—Ergonomic Universal Station

6 GENERAL

6.1 Electrostatic Discharge

6.2 Clean Up

6.3 Touch-Up Colors

7 POWER-UP CHECK

7.1 Power-Up Procedure

Table of Contents

LCN System Installation ii 9/96

8 SYSTEM CONFIGURATION

8.1 System Pinning

9 UNIVERSAL STATIONX INSTALLATION

9.1 Placement

9.2 Grounding

9.3 Power

9.4 LCN Cable Connection

9.5 Ethernet Connection

10 UCN TAP INSTALLATION

10.1 Installation in LCN Cabinets

10.2 Installation in a Universal Station

10.3 Installation in an Ergonomic Universal Station

10.4 Installation in a Console Global User Station

11 RULA INSTALLATION

11.1 Installation Instructions

12 APPLICATION MODULEXINSTALLATION

12.1 Placement

12.2 Grounding

12.3 AC Power

12.4 LCN Cable Connection

12.5 Ethernet Network Connection

13 SCANNER APPLICATION MODULE INSTALLATION

13.1 Placement

13.2 Grounding

13.3 AC Power

13.4 LCN Cable Connection

13.5 Communication Connection to MC0

14 DESKSIDE GLOBAL USER STATION

14.1 Preinstallation

14.2 Audit Equipment

14.3 Placement

14.4 Grounding

14.5 AC Power

14.6 Connecting the Monitor

14.7 Connecting the Keyboard

14. 7.1 Connecting the Standard Keyboard

14. 7.2 Connecting the Optional Integrated Keyboard and Mouse

14.8 Connecting the Optional Touchscreen

14.9 Connection to the Ethernet

14.10 Connection to Printer

14.11 Connection to LCN Coax Cables

Table of Contents

LCN System Installation iii 9/96

15 CONSOLE GLOBAL USER STATION

15.1 Preinstallation

15.2 Placement

15.3 Grounding

15.4 AC Power

15.5 Connection to the Ethernet

15.6 Connection to a Printer

15.7 LCN Cable Connection

16 CLASSIC CONSOLE GLOBAL USER STATION

16.1 Preinstallation

16.2 Placement

16.3 Grounding

16.4 AC Power

16.5 Connection to the Ethernet

16.6 Connection to a Printer

16.7 LCN Cable Connection

A OPTIONS INSTALLATION FOR UNIVERSAL STATIONS

A.1 Universal Station Complexing (Physical)

A.2 Module Installation

A.3 Peripheral Installation and Cabling

A.4 Trend Pen Assembly Removal and Replacement

A.5 Hiway Gateway Cabling

A.6 Enhanced Universal Work Station (EUWS) Installation

A.7 Redundant Application Module Cabling

A.8 Universal StationXCabling (Universal Station Furniture)

A.9 Universal Station Cabling (Ergonomic Furniture)

A.10 Universal StationXCabling (Ergonomic Furniture)

B OPTIONS INSTALLATION FOR USs IN ERGONOMIC FURNITURE

B.1 Console Complexing (Physical)

B.2 Module Installation

B.3 Peripheral Installation and Cabling

C INSTALLATIONS OF CE COMPLIANT OPTIONS

C.1 Overview

C.2 Universal Station Cabling—Classic Furniture

C.3 Universal Station Cabling—Ergonomic Furniture

C.4 Universal StationXCabling—Classic Furniture

C.5 Universal StationXCabling—Ergonomic Furniture

C.6 Micro TDC 3000 Cabling

C.7 Applications ModuleX(AXM) Cabling

INDEX

LCN System Installation iv 9/96

Inhaltsverzeichnis

Andere Honeywell Netzwerk-Hardware Handbücher

Honeywell

Honeywell MIWI350 Bedienungsanleitung

Honeywell

Honeywell HN350401 Series Bedienungsanleitung

Honeywell

Honeywell MAXPRO PE Bedienungsanleitung

Honeywell

Honeywell 057810 Bedienungsanleitung

Honeywell

Honeywell HDCD8TP Bedienungsanleitung

Honeywell

Honeywell MAXPRO NVR SE Series Bedienungsanleitung

Honeywell

Honeywell MAXPRO NVR XE Bedienungsanleitung

Honeywell

Honeywell FUSION STREAMER Bedienungsanleitung

Honeywell

Honeywell Q7055C1053 Bedienungsanleitung

Honeywell

Honeywell MAXPRO NVR PE Bedienungsanleitung

Honeywell

Honeywell MAXPRO NVR SE Bedienungsanleitung

Honeywell

Honeywell MAXPRO NVR SE Bedienungsanleitung

Honeywell

Honeywell 4909 CPVC Bedienungsanleitung

Honeywell

Honeywell Embedded NVR Bedienungsanleitung

Honeywell

Honeywell VARIODYN D1 Bedienungsanleitung

Honeywell

Honeywell LonWorks protocol Bedienungsanleitung

Honeywell

Honeywell HN300401 Series Bedienungsanleitung

Honeywell

Honeywell Mesh Router Bedienungsanleitung

Honeywell

Honeywell Internet Connection Module Bedienungsanleitung

Honeywell

Honeywell 2450Cm Series Bedienungsanleitung

Honeywell

Honeywell 30 Series Bedienungsanleitung

Honeywell

Honeywell HEN04111 Bedienungsanleitung

Honeywell

Honeywell hus-nvr-1032-e Bedienungsanleitung

Honeywell

Honeywell MAXPRO NVR 3.1 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung