Honeywell CT40-WS-PB Bedienungsanleitung

Arm Mount Sled and Armband

Wearable Solution for Booted CT40

Models CT40-WS-PB, CT40-WS-AB, HWS-ARM BAND,

CT40-WS-00, CT40-WS-KIT

Quick Start Guide

CT40-WS-EN-QS-01 Rev A

1/20





Introduction

The Honeywell Wearable Solution allows the user to mount a

booted Dolphin CT40 mobile computer on either arm. It consists

of an arm mount sled and an armband. The sled and armband

can be purchased separately or together as a kit.

Note: HWS-ARM BAND is also compatible with the Dolphin 75

Wearable Solution.

If you ordered additional accessories, verify that they are also

included with the order. Be sure to keep the original packaging

in case you need to return your accessories for service.

CT40 Feature Note

When the CT40 is installed in the arm mount sled, the following

features are not available:

• Internal scanner

• Audio jack pin (select models only)

Part Number Description

CT40-WS-PB Arm mount sled with tethered ring scanner

CT40-WS-AB Armband with wrist pad

HWS-ARM BAND Armband

CT40-WS-00 Kit containing CT40-WS-PB and

CT40-WS-AB

CT40-WS-KIT Kit containing CT40-WS-PB and

HWS-ARM BAND

Arm Mount Sled Features

I/O Connector

Ring Scanner

Trigger

Latch

Tab Tab

Finger Ring

Armband Features

Strap Clip

Strap Horn

Sled Release Clip Sled Release Clip

CT40-WS-AB

Wrist Pad Arm Pad

HWR-ARM BAND

Strap Horn

Sled Release Clip Sled Release Clip

Strap Horn

Arm Pad

Assemble the CT40 Wearable Solution

The illustrations in this procedure assume the sled has not yet

been mounted to the armband. However, the sled can be

mounted to the armband before the user puts the armband on.

Note: The sled requires the use of protective boot CT40-PB-00.

Note: The wearable solution is not compatible with a hand strap.

1. Insert the bottom of a booted CT40 into the bottom of the

sled at an angle.

2. Press the CT40 and sled together firmly until the latch

clicks. If the latch does not engage, verify that the CT40 is

fully seated in the bottom of the sled.

3. Place the armband on top of either arm.

(Armband CT40-WS-AB shown for illustration purposes.)

4. Buckle the straps around the arm and secure any excess

strap length.

5. Align the four tabs on the back of the sled with the notches

on the armband and press down evenly until the assembly

clicks together.

HWR-ARM BAND

6. Rotate the ring scanner head to the desired orientation and

insert finger.

Note: The ring scanner cable should not cross under the hand.

7. If the CT40 is awake, it will automatically connect to the ring

scanner. If the CT40 is in sleep mode, tap the power button

or the scan button on the CT40 to wake the device and

connect to the scanner.

Scan a Bar Code with the Scan Demo

Note: For optimum performance, avoid reflections by scanning the bar

code at a slight angle.

1. Swipe up from the bottom of the Home screen to access all

apps.

2. Touch Demos > Scan Demo.

3. Point the ring scanner at the bar code.

4. Press the ring scanner trigger.

The decode results display on the screen.

Note: In the Scan Demo app, not all bar code symbologies are

enabled by default. If a bar code does not scan, the correct

symbology may not be enabled. To learn how to modify the

default app settings, see the user guide.

Wrist Position

(Armband and sled not shown.)

Remove the CT40 from the Wearable Solution

1. Remove finger from the ring scanner.

2. Press down on the clips on both sides of the armband to

release the sled. (Armband CT40-WS-AB shown for

illustration purposes.)

3. Lift the sled out.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Rack & Stand Handbücher

Honeywell

Honeywell CN85-WL-6DESK Bedienungsanleitung

Honeywell

Honeywell HMM12 Bedienungsanleitung

Honeywell

Honeywell 7800 SERIES Bedienungsanleitung

Honeywell

Honeywell SK-NIC-KIT Technisches Handbuch

Honeywell

Honeywell 50024917-002/U Bedienungsanleitung

Honeywell

Honeywell 5815RMK Technisches Handbuch

Honeywell

Honeywell SK-NIC-KIT Technisches Handbuch

Honeywell

Honeywell 013046 Bedienungsanleitung

Honeywell

Honeywell Sensepoint XCD Bedienungsanleitung

Honeywell

Honeywell CT40-SH-DC Bedienungsanleitung

Honeywell

Honeywell T7770A Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung