Honeywell 2911 Bedienungsanleitung

User Guide

Fire & Water Security Safe

Model 2911

ENGLISH

IMPORTANT

• Fill out the Safe Identiﬁcation Record on page 10. You may need this information in

the future to order replacement keys or request consumer assistance.

• Do not remove the serial number tag from the safe.

• Store Override Access Keys in a secure location. Never store them near or inside the safe.

• Read this user guide carefully and save it for future reference. Never store it inside the safe.

Introduction ..................................................................................................Page 1

Package Contents

Features

Care and Maintenance ..............................................................................Page 2

Important Moisture Warning

Getting Started............................................................................................. Page 2

Unlocking the Safe for the First Time

Installing/Replacing the Batteries

Testing the Digital Lock

Programming Your Safe............................................................................Page 4

Programming a New Passcode

Testing a New Passcode

Resetting the Passcode

Locking and Unlocking the Safe ............................................................ Page 5

Locking the Safe

Unlocking the Safe with Your Passcode

Using the Override Access Keys

Additional Safe Features........................................................................... Page 6

Interior Safe Light

Adjustable Shelf

Mounting Kit

Anchoring the Safe to a Floor..................................................................Page 7

Hardware and Preparation

Anchoring Safe to a Concrete Floor

Anchoring Safe to a Wood Floor

Consumer Assistance.................................................................................Page 9

Ordering Additional Access Keys

Safe Identiﬁcation Record..................................................................... Page 10

Locating Safe Identiﬁcation Numbers

Product Registration

Product Warranty ..................................................................................... Page 11

TABLE OF CONTENTS

Your new Honeywell Fire & Water Security Safe keeps important documents and personal items safe

and secure from theft, ﬁre and water damage. All Honeywell safes are designed and built using the

highest manufacturing standards to ensure maximum user satisfaction under a variety of condi-

tions. With proper care, your Honeywell safe will provide peace of mind for many years to come.

Please carefully check the above list to conﬁrm all items have been included. If any items are

missing, please contact our Consumer Services team so we can help.

IMPORTANT: Do not return safe to store. Stores will not accept returned products without prior

authorization. You must ﬁrst contact our Consumer Services team.

This Honeywell Fire & Water Safe was designed to protect documents and personal items from

heat, smoke and moisture damage due to exposure to ﬁre and water.

Fire Protection

ETL veriﬁed to maintain an interior temperature

below 350º F (177ºC) for thirty minutes, if outside

temperature reaches up to 1550ºF (843ºC).

Water Protection

ETL veriﬁed to maintain a dry interior if safe is

completely submerged in up to 50mm (1.97 inches)

of water, for up to 8 hours.

INTRODUCTION

PACKAGE CONTENTS:

• Fire & Water Security Safe

• Override Access Keys (x2)

• Removeable Shelf

• Adjustable Shelf Clips (x4)

• Mounting Hardware Kit

• User Guide

Fire & Water Security Safe

Adjustable Shelf Clips Mounting Kit

Override Access Keys (x2) Removable Shelf

User Guide

FEATURES:

4. 5.

1. Digital Lock with Backlit Keypad

2. LED Indicator Light

3. Handle with Hidden Key Access

4. Removable, Adjustable Shelf

5. Adjustable Shelf Supports (x4)

6. Interior Light (not shown)

7. Battery Compartment

8. Predrilled Mounting Holes & Hardware

Kit (not shown)

9. Pry-Resistant Live Locking Bolt

10. Fire-Insulated Double-Wall Construction

11. Waterproof Seal

12. 0.91 cu. ft capacity

IMPORTANT CARE AND MAINTENANCE

To ensure optimal performance of your safe, please follow these simple guidelines:

After opening your safe for the ﬁrst time, leave the door open for 24 hours to let it acclimate to

your home’s air conditions.

CLEAN HANDS

Clean hands before operating your safe, particularly the keypad.

CLEAN SAFE

Regularly wipe down the surface of your safe. To remove excess dirt or stains, use a mild cleaner

(e.g., window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER

use abrasive cleansers on the safe or digital keypad.

MOISTURE WARNING

The natural presence of water in the air and the level of humidity in your home will impact the

moisture level inside your safe. Waterproof safes are designed with airtight seals to keep water out,

so once moisture gets inside the safe it cannot evaporate. To keep low moisture levels inside the

safe and prevent damage to valuables, we recommend the following:

• Open and air out your safe for at least 30 minutes every two weeks to prevent moisture build-

up. This will balance the interior and exterior humidity levels and allow any excess moisture

trapped inside to escape. It is recommended to occasionally air out the safe for longer periods

of time. Look for signs of moisture to determine if you need to air it out more often.

• Avoid placing your safe in areas of high humidity, such as basements.

• Consider adding moisture-absorbing products to your safe, such as desiccant packs.

• Place delicate items such as pictures or important paper documents in airtight bags or

containers for added protection.

Note: If you do not open waterproof safes on a regular basis to let them air out, you may begin to

notice damp surfaces and/or musty smells, especially on paperwork. The manufacturer will not be

responsible for any damage or loss of items placed in waterproof safes due to moisture. Proper

care and preventative maintenance are the owner’s responsibility and is required to assure

continued levels protection and trouble-free performance during the lifetime of the safe.

WARNING:

This safe is not intended for the storage of medications, pearls, ﬁrearms, ammunition, or

combustible items of any kind.

GETTING STARTED

UNLOCKING THE SAFE FOR THE FIRST TIME

To open the safe for the ﬁrst time, you will need one of the two Override Access Keys.

Figure 1 Figure 2 Figure 3 Figure 4

1. The key lock is hidden inside the safe handle. Locate the key cover at the top of the handle and

slide up to reveal the lock. (Figure 1)

2. Insert the override access key into the lock and turn to the right. (Figure 2)

3. Rotate handle to the right and pull safe door open. (Figure 3)

4. With the door open, turn the key to the left and remove. (Figure 4)

5. Snap on the lock cover and slide down to secure. Put the key in a safe place, away from the safe.

1. With the safe door open, press and hold the lock release button on the inside edge of the

safe door. (Figure 1)

2. While holding the lock release button, turn the handle to the left to place the bolts in the locked

position. (Figure 2)

3. Enter the preset factory code 1-5-9 followed by the # key. (Figure 3) If the code is entered

correctly, the LED will turn green. (Figure 4)

4. You will have 5 seconds to turn handle to the right, to retract the bolt into the unlock

position. (Figure 5)

5. Press and hold lock release button and turn handle to the left to return the bolt to the locked

position.

6. Leave the door open and proceed to the Programming Your Safe section.

INSTALLING / REPLACING THE BATTERIES

To use the digital keypad, ﬁrst install the batteries. The battery compartment is located on the interior

side of the safe door. (Figure 1)

TESTING THE DIGITAL LOCK

Once the batteries are installed, test the digital lock using the preset factory code.

IMPORTANT: Replace batteries regularly to avoid losing keypad access to your safe. If the bat-

teries drain completely, you will not be able to access the safe using your passcode. However, you

will still be able to open the safe using the Override Access Keys. To open the safe with the keys,

follow the instructions in the Using the Override Access Keys section. Then, replace the batteries

and reset your passcode.

Figure 1

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5

Figure 2 Figure 3

1. Remove the battery compartment cover. (Figure 1)

2. Insert 4 “AA” batteries (not included). Make sure batteries are installed correctly, with

respect to polarity (+ and -). (Figure 2)

3. Replace the battery cover. (Figure 3)

4. Leave the door open and proceed to the Testing the Digital Lock section below.

GETTING STARTED (CONTINUED)

Green LED

PROGRAMMING YOUR SAFE

1. Locate and press the red reset button on the inside of the safe door. (Figure 1)

2. The LED indicator bar, above the keypad, will ﬂash orange, indicating that it is ready for

programming. (Figure 2)

3. Enter your new personal passcode (3-8 digits) followed by the # key.

4. Immediately reenter the new passcode and press the # key to conﬁrm.

• If the passcodes match, the LED indicator bar will turn green; your new passcode is now

set. (Figure 3) Continue to the next section.

• If the passcodes do not match, the LED indicator bar will ﬂash red and revert to the

previous code. (Figure 4) Return to step 1 to begin the programming process again.

1. Begin with the door open and in the locked position. The handle will be in the vertical position

and the door bolt will be sticking out from the side of the door. (Figure 1)

2. Enter the new passcode followed by the # key.

• If the passcode is entered correctly, the indicator bar will turn green. (Figure 2) Proceed to step 3.

• If the passcode is entered incorrectly, the indicator bar will turn red. (Figure 3) Return to

the Programming a New Passcode section to reset your passcode.

3. After entering the correct passcode, lift the handle to the right to retract the bolt and unlock

the door. (Figure 4)

PROGRAMMING A NEW PASSCODE

You can program your safe to open with a personal passcode containing 3 to 8 digits.

TESTING A NEW PASSCODE

After programming your new passcode, you can test it before closing the safe.

Time Out Feature

After entering the passcode, you will have 5 seconds to turn the handle and unlock the door

before the safe will lock again and you will need to reenter the passcode.

RESETTING THE PASSCODE

You can change the passcode for your safe at any time. To reset the passcode, follow the

instructions in the Programming a New Passcode section.

If you have lost or forgotten your passcode, you can use the Override Access Keys to unlock your

safe. Once unlocked, follow the instructions in the Programming a New Passcode section.

Figure 1

Figure 2 Figure 3 Figure 4

Figure 4

Orange = Ready to Program Green = Passcode Set Successfully Red = Passcodes Don't Match

Figure 2 Figure 3

Green = Passcode Set Successfully Red = Passcodes Don't Match

LOCKING AND UNLOCKING THE SAFE

1. With the handle in the unlocked position, tightly close the safe door. (Figure 1)

2. Push the handle down into the locked (vertical) position to activate the door bolt. (Figure 2)

IMPORTANT: This safe is equipped with an air-tight seal which allows it to meet the ﬁre and

water protection claims outlined at the beginning of this user guide. Due to the tight ﬁt of the

seal and door, you may need to push down the handle with some force to lock it into place. You

will feel the handle click into place when locked.

3. Check that the safe is locked by attempting to move the handle. It should remain in the locked

(vertical) position.

1. Enter your passcode followed by the # key. (Figure 1)

• If the passcode is entered correctly, the indicator bar will turn green. (Figure 2)

• If the passcode is entered incorrectly, the indicator bar will turn red. (Figure 3)

2. After entering the correct passcode, lift the handle to the right to retract the bolt and

unlock the door. (Figure 4)

LOCKING THE SAFE

UNLOCKING THE SAFE WITH YOUR PASSCODE

Time Out Feature

After entering the passcode, you will have 5 seconds to turn the handle and unlock the door

before the safe will lock again and you will need to reenter the passcode.

Lockout Feature

For added security, the safe is programmed to lock out users if an incorrect passcode is entered

three times in a row. The safe will remain in lockout mode for 15 minutes. During this time, the

safe can be opened using the Override Access Keys.

Figure 1 Figure 2

Figure 1 Figure 2 Figure 3 Figure 4

Green = Passcode Set Successfully Red = Passcodes Don't Match

ADDITIONAL SAFE FEATURES

LOCKING AND UNLOCKING THE SAFE (CONTINUED)

INTERIOR SAFE LIGHT

This safe features an interior light that automatically turns on when the safe is unlocked with the correct

passcode. After 30 seconds, the light will automatically turn off to save battery power. To turn the light on

again, press the # button on the keypad and the light will turn on for 30 more seconds before automatically

shutting off again. Press the * button to turn the light off manually.

ADJUSTABLE SHELF

This safe includes an adjustable shelf and 4 shelf clips. The shelf clips snap into the recesses along the

inside wall of the safe and the shelf rests on top.

1. To install the shelf, insert the clips into the recesses along the inside wall, positioning them at the

same level. (Figure 1)

2. Place the shelf on top of the clips and press down gently to secure. (Figure 2)

Adjust the shelf to suit the contents of your safe or remove it completely for added storage space. There is

room inside the safe for two shelves. Contact our Consumer Services team to order an additional shelf.

Figure 1 Figure 2

1. The keylock is hidden inside the safe handle. Locate the lock cover at the top of the handle and slide up to

remove. (Figure 1)

2. Insert the access key into the lock and turn to the right. (Figure 2)

3. Rotate handle to the right and pull the safe door open. (Figure 3)

• If you need to reset the passcode, follow the instructions in Programming a New Passcode section.

• If the batteries need to be replaced, follow the instructions in Installing the Batteries section.

4. To relock safe with key, close the door and rotate the handle to the closed (vertical) position. Due to the

air-tight seal around the door, you may need to use some force to turn the handle and lock into place.

5. With the key in the lock, turn it to the left to lock the safe. Do not forget this step or the safe will remain unlocked.

6. Remove the key and store in a secure location, away from the safe. Snap on the lock cover and slide down

to secure. Put the key in a safe place, away from the safe.

USING THE OVERRIDE ACCESS KEYS

Your safe includes 2 Override Access Keys that allow you to access your safe without the passcode. In the

event that you have forgotten your passcode or the batteries have drained and the keypad is not opera-

tional, you can use these keys to unlock the safe.

Figure 1 Figure 2 Figure 3

MOUNTING KIT

Your safe includes a mounting hardware kit, giving you the option to secure your safe to the ﬂoor for added

protection. Refer to the Anchoring the Safe to a Floor section for more information.

ANCHORING THE SAFE TO A FLOOR

PREPARATION

INCLUDED HARDWARE:

For added security, you have the option of anchoring your safe to the ﬂoor. The included hardware kit

and pre-drilled anchoring hole allow you to secure your safe to concrete or wood surfaces.

For metal surfaces, additional hardware is needed. Contact your local home center for assistance.

NOTE: Mounting this safe is at the consumer’s expense and discretion. LH LicensedProducts, Inc.

is not responsible for any costs incurred if the unit has to be replaced. If you have any questions

about mounting the safe, please check with your local home center/hardware retailer or

independent contractor.

3/8” (9.5mm) x 1-3/4” (45mm)

Hex Head Bolt – 1 ea.

3/8” (9.5mm) x 1-9/16” (40mm)

Drop-in Anchor – 1 ea.

Hex Head Wood Lag Bolt

3/8” (9.5mm) x 2-1/2” (64mm)

Tools Required for Anchoring to Concrete:

• Phillips Screwdriver

• Pen or Pencil

• Drill

• Hammer

• 1/2” Concrete Drill Bit

• 9/16” Socket Wrench

Tools Required for Anchoring to Wood:

• Phillips Screwdriver

• Pen or Pencil

• Drill

• 1/4” Wood Drill Bit

• 9/16” Socket Wrench

1. Find a suitable and convenient location for your safe. Empty all safe contents.

2. Locate the mounting hole cover plate on the inside ﬂoor of the safe. Remove the (6) screws

securing the plate and set aside. (Figure 1)

3. Remove the cover plate, gasket and cap, to reveal the mounting hole, and set aside for later

use. (Figure 2)

4. Tilt the safe backward and using a pencil or screwdriver, insert it into the mounting hole and

punch out the hole plug at the bottom of the safe. (Figure 3)

5. Place the safe in the desired location. Use a pencil or pen to mark the ﬂoor through the

mounting hole so you know where to drill. Move the safe aside. (Figure 4)

NOTE: If the ﬂoor is carpeted, cut a hole in the carpet (at least 1” diameter) to expose the wood or

concrete before drilling.

Figure 2 Figure 3 Figure 4Figure 1

ANCHORING SAFE TO A CONCRETE FLOOR

1. Using a 1/2” concrete drill bit, drill a hole in the ﬂoor with a depth of 1-5/8”. (Figures 1 & 2)

IMPORTANT: Hole must be 1-5/8” deep (minimum) to properly insert the Drop-in Anchor, and no

deeper than 1-3/4” to keep the anchor in position for the Hex Head Bolt.

2. Remove any excess dust from the hole. Insert the Drop-in Anchor (slotted side down) and tap into

place using a hammer, until it is ﬂush with the ﬂoor surface. (Figure 3)

3. Insert an anchor punch or Phillips head screwdriver into the Drop-in Anchor and hammer to lock

into place. This will prevent it from turning when mounting the safe. (Figure 4)

4. Place the safe back into position, lining up the mounting hole. (Figure 5)

5. Insert the Hex Head Bolt, through the safe ﬂoor and into the Drop-in Anchor. (Figure 6)

6. Secure the Hex Head Bolt tightly using a socket wrench. (Figure 7)

7. Replace the gasket and mounting plate cover. (Figure 8)

Figure 5

Figure 1

Figure 8

Figure 4

Figure 3

Figure 6

Figure 2

Figure 7

1. Use a 1/4” Wood Drill Bit to drill a hole in the ﬂoor with a depth of 1-1/2”. (Figure 1)

2. Remove any excess dust from the hole.

3. Place the safe back into position, lining up the mounting hole. (Figure 2)

4. Insert a Wood Lag Bolt through the safe bottom and into the ﬂoor hole. (Figure 3)

5. Secure the Wood Lag Bolt tightly using a 9/16” socket wrench. (Figure 4)

6. Replace the gasket and mounting plate cover. (Figure 5)

ANCHORING SAFE TO A WOOD FLOOR

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5

Inhaltsverzeichnis

Andere Honeywell Sicher Handbücher

Honeywell

Honeywell 2070A - 43 Cubic Foot Expandable Anti-Theft Wall... Anleitung zur Verwendung

Honeywell

Honeywell 2111 Bedienungsanleitung

Honeywell

Honeywell 2208 Bedienungsanleitung

Honeywell

Honeywell 5410 Anleitung zur Verwendung

Honeywell

Honeywell 5005B Bedienungsanleitung

Honeywell

Honeywell 1553 Bedienungsanleitung

Honeywell

Honeywell 5403 Bedienungsanleitung

Honeywell

Honeywell 5203 Bedienungsanleitung

Honeywell

Honeywell 5103 Bedienungsanleitung

Honeywell

Honeywell 2092D - Waterproof Fire Safe Anleitung zur Verwendung

Honeywell

Honeywell 5002 Bedienungsanleitung

Honeywell

Honeywell 2116 Bedienungsanleitung

Honeywell

Honeywell 3511 Bedienungsanleitung

Honeywell

Honeywell 2512 Bedienungsanleitung

Honeywell

Honeywell 1532 Bedienungsanleitung

Honeywell

Honeywell 2054 - 1 Hour Steel Fire Safe Anleitung zur Verwendung

Honeywell

Honeywell 3035D Anleitung zur Verwendung

Honeywell

Honeywell 5911 Bedienungsanleitung

Honeywell

Honeywell 2072 - 1.00 Cubic Foot Anti-Theft Shelf Safe Anleitung zur Verwendung

Honeywell

Honeywell 5005 Anleitung zur Verwendung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

Honeywell

Honeywell 1114 Bedienungsanleitung

Honeywell

Honeywell 5605 Bedienungsanleitung

Honeywell

Honeywell 3518 Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Phoenix

Phoenix SS0100E Produktinformationsblatt

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung

Ankaro

Ankaro ANK EZ I Bedienungsanleitung

Phoenix

Phoenix FS1270E Series Bedienungsanleitung