Honeywell EXPTZ-252A Produkthandbuch

HWLKS-C-M-1918

Honeywell

- 1 -

INSTALLATION&OPERATION GUIDE BOOK

EXPTZ Camera

Explosive proof Security Camera

The EXPTZ Series follow the stringent explosion-proof requirements with creative mechanical strength and

design. Moreover, the EXPTZ explosion-proof system is designed to meet the rigorous requirements of

explosion-proof electrical equipment installed in hazardous locations. The system has built-in True Day

&Night zoom camera with programmable Camera setting, Video Flip and BMBTM (Black Masking BLC).

(HIGH SPEED)

HWLKS-C-M-1918

Honeywell

- 2 -

Important Safety Instructions -----------------------------------------------------------

Method of Installation ----------------------------------------------------------------------

Maintenance -----------------------------------------------------------------------------------

Base Schematic ------------------------------------------------------------------------------

Wire and Power Connection Guide ----------------------------------------------------

Simple Function Control Guide ---------------------------------------------------------

Program and Operation --------------------------------------------------------------------

Specifications ---------------------------------------------------------------------------------

Remote Controller ---------------------------------------------------------------------------

Optional Accessories ----------------------------------------------------------------------

EXWJ400 Schematic & Operating ----------------------------------------------------

Dimensions -------------------------------------------------------------------------------------

Product Warranty Guide --------------------------------------------------------------------

Contents

HWLKS-C-M-1918

Honeywell

- 3 -

Important Safety Instructions

1. Install and use this system after reading these instruction thoroughly.

2. Keep these instructions.

3. Install in accordance with the manufacture’s instruction.

4. Take care of all Cautions and Warnings.

5. Use stainless steel hardware to fasten the mount to outdoor surfaces.

6. A readily accessible disconnect device shall be incorporated in the building installation

wiring.

7. Only use replacement parts recommended by Honeywell.

8. The maximum ambient temperature range is -20℃to 50℃.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER(OR BACK).

NO USER SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PRERSONNEL

Explanation of Graphical Symbols.

This symbol is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important

operating and maintenance(Servicing) Instructions in the literature

accompanying the appliance.

TO REDUCE THE RISK OF IGNITION DO NOT OPEN WHEN AN EXPLOSIVE

GAS ATMOSPHERE MAY BE PRESENT

WARNING: To reduce the risk of ignition of hazardous atmospheres, conduit runs

must have a sealing fitting connected within 3/4 inches of the enclosure.

WARNING: To reduce the risk of ignition of Hazardous Atmospheres, disconnect

the equipment from the supply circuit before opening.

HWLKS-C-M-1918

Honeywell

- 4 -

Methods of Installation

WARNING: Gross weight of this system is about 40kg. Use caution when lifting

and installing. It is recommended you to wear proper non-slip gloves during installation.

This system can be installed in a standard as below Figure1.

If you wish to install another method, you must do it after discussing with a

manufacture.aas

Figure1.

Standard Method of Installation

HWLKS-C-M-1918

Honeywell

- 5 -

Methods of Installation

PT 3/4 “-14

Seal Fitting

Explosion proof

Flexible conduit

PT 3/4”-14 Nipple

Fiber Filler Sealing

compound Cables

Sealing Method

Standard Method of Installation

To install this system, please refer to Figure2 and do the following steps.

1. Fix this system with M10 x L40mm stainless steel bolts, flat washers and spring washers with at

least four parts each.

2. Make sure the seal fittings and the threaded hole of this system are free of the dirt and particles..

3. Assemble Nipple, the threaded hole of this system, seal fitting and flexible conduit to be fasten

firmly and then the cables must be passed through the seal fitting, Nipple and flexible conduit.

Plus, the sealing fitting, flexible conduit, Nipple should be acquired IECEx Certification.

4. Pack the seal fitting with fiber as the sealing method of Figure2,

Fiber filler makes a dam that keeps the sealing compound in chamber of the seal fitting while it

cures and hardens. And Pour the sealing compound into the fitting.

5. Install the Earth Cable like Figure2.

WARNING: Keep assembly tightly closed when operating.

Figure2.

HWLKS-C-M-1918

Honeywell

- 6 -

Maintenance

No. Description Q’TY

1 Camera Housing Assy 1EA

2 Tilt Drive Assy 1EA

3 Elbow Housing 1EA

4 Pan Drive Assy 1EA

5 Base Housing 1EA

6 Hexagon Socket Head Cap Screws 28EA

7 Hexagon Head Screws 4EA

8 Hexagon Socket Head Screws 1EA

3 1

To disassembly this product, please refer to Figure3 and do the following steps.

1. Use a Φ5 Wrench for loosen 28EA Hexagon socket head screws.

2. The Torque of jointing screws is approximately 160~200 kgf.cm . Therefore consider the torque when the

screws are loosen.

3. If there is any problem to disassemble or assemble, you should discuss with the specialist or Engineering

site of the product.

Figure3.

HWLKS-C-M-1918

Honeywell

- 7 -

1. Make the wiper vertical

and depart the clamp.

2. Depart the cover with

twist.

3. Loosen the two screws from housing and put out the camera bracket and loosen other

screws to depart the camera, bracket and PCB,

Maintenance

HWLKS-C-M-1918

Honeywell

- 8 -

1. Loosen the two screws on the bracket. 2. Loosen the Wiper Head and depart

the wiper motor assembly.

2. Loosen the Hexagon socket head screws and depart the wiper bar from the wiper head.

It can be changed as the expendable supplies.

Maintenance

HWLKS-C-M-1918

Honeywell

- 9 -

Figure4.

Base Schematic of Installation

Figure4 is recommended for the base Schematic of Installation.

If you wish to consist of another method or other components, you must proceed to do after conferring

with a manufacture.

Base Schematic

POWER

AC100~ 240V

BNC

MAIN MONITOR

DATA1 DATA2

+ - -+ + -

J-BOX REAR

J-BOX FRONT

KEYBOARD CONTROLLER

HTX-5000

REAR

DATA 2 DATA 1 DC 12V

RS 485

1 DOME 2

IN OUT DVR RS 232C

ALARM/DVR

DC 12V

SLAVE

RS 485 +

Alram out

COM

N/O

RS 485

HWLKS-C-M-1918

Honeywell

- 10 -

Configuration of Wire Harness

Wire Color Function Description

Brown

SkyBlue

Power Input

(AC 100V ~ 240V)

Low

Red

Orange

Yellow

Green

Black

Alarm Input

Alarm 1

Alarm 2

Alarm 3

Alarm 4

GND

White

Violet

Blue

Alarm Output

Com

Black

(Coaxial cable) Video BNC Cable

Blue stripe

White stripe Control Data RS485 Data +

RS485 Data -

POWER

AC 100V ~ 240V

BNC

ALARM & DATA

Wire and Power Connection Guide

Inhaltsverzeichnis

Andere Honeywell Sicherheitskamera Handbücher

Honeywell

Honeywell HD51PX Bedienungsanleitung

Honeywell

Honeywell EQUIP HCD554IP Bedienungsanleitung

Honeywell

Honeywell Lyric C1 Bedienungsanleitung

Honeywell

Honeywell KD6A Bedienungsanleitung

Honeywell

Honeywell ACM574TPX Bedienungsanleitung

Honeywell

Honeywell HD60 Series Bedienungsanleitung

Honeywell

Honeywell HEW2PR1 Bedienungsanleitung

Honeywell

Honeywell 30 Series Bedienungsanleitung

Honeywell

Honeywell HCD1F Bedienungsanleitung

Honeywell

Honeywell HDZ302D Bedienungsanleitung

Honeywell

Honeywell HCU484X Bedienungsanleitung

Honeywell

Honeywell HD4US Bedienungsanleitung

Honeywell

Honeywell HD70P Bedienungsanleitung

Honeywell

Honeywell HD5 Series Bedienungsanleitung

Honeywell

Honeywell HICC-1600TVI Bedienungsanleitung

Honeywell

Honeywell HCX13M Handbuch

Honeywell

Honeywell HD3C Bedienungsanleitung

Honeywell

Honeywell HD6 Series Bedienungsanleitung

Honeywell

Honeywell HB273 Bedienungsanleitung

Honeywell

Honeywell HEV28C Bedienungsanleitung

Honeywell

Honeywell HC35WZ2R25 HC35WZ5R30 Bedienungsanleitung

Honeywell

Honeywell HBD9 Bedienungsanleitung

Honeywell

Honeywell HBW2PR1 Bedienungsanleitung

Honeywell

Honeywell HCD92534 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung