Honeywell HDZ402LIWV Bedienungsanleitung

40X ZOOM IR PTZ

Dome Cameras

HDZ402LIWV HDZ404LIWV HDZ408LIWV

HDZ402LIKV

HDZ404LIKV

HDZ408LIKV

User Guide

40X ZOOM IR PTZ DOME CAMERA USER GUIDE

Copy Right

by any means without written permission from Honeywell. The information in this publication is

believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any

consequences resulting from the use thereof. The information contained herein is subject to change

without notice. Revisions or new editions to this publication may be issued to incorporate such

changes. For patent information, see https://buildings.honeywell.com/us/en/support/legal/patents.

Revision

Issue

Date

Revision

07/2020

New document. Revision A

06/2021

UI & description update

40X ZOOM IR PTZ DOME CAMERA USER GUIDE

Cautions and Warnings

WARNING Installation and servicing should be performed only by

qualified and experienced technicians to conform to all local codes and to

maintain your warranty.

WARNING To ensure compliance with electrical safety standards, CSA

Certified/UL Listed Class 2 power adapters are required. High Power over

Ethernet (PoE) shall be provided by listed Information Technology

Equipment. The PoE is not intended to be connected to exposed (outside

plant) networks.

Note

Important:

For PoE operation, a high power PoE injector capable of supplying

at least 60 W is required.

The models mentioned in this manual don’t support

sing PoE IEEE802.3af or IEEE802.3at.

Regulatory Statements

FCC Compliance Statement

Information to the User: This equipment has been tested and found to comply

with the limitsfor a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed toprovide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

40X ZOOM IR PTZ DOME CAMERA USER GUIDE

Note

Changes or modifications not expressly approved by the party

responsible forcompliance could void the user’s authority to operate the

equipment.

Canadian Compliance Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du

Canada.

Manufacturer’s Declaration of Conformity

North America

The equipment supplied with this guide conforms to UL 62368-1 and CSA C22.2

No. 62368-1.

Europe

The manufacturer declares that the equipment supplied with this guide is

compliant with the European Parliament and Council Directive on the

Restrictions of the use of certain hazardous substances in electrical and

electronic equipment (2011/65/EU) as Amended by RoHS 3 (2015/863),

and the essential requirements of the EMC Directive (2014/30/EU),

conforming to the requirements of standards EN 55032 for emissions, EN

50130-4 for immunity, and EN 62368 for electrical equipment safety.

Waste Electrical and Electronic Equipment

(WEEE)

Correct Disposal of this Product

(applicable in the European Union and

other

European countries with separate collection systems).

This product should be disposed of, at the end of its useful life, as per

applicable

local laws, regulations, and procedures.

Regulation (EC) No 1907/2006

According to Article 33 of Reach Regulation be informed that the substances

listed below may be contained in these products above the threshold level of

0.1% by weight of the listed article.

40X ZOOM IR PTZ DOME CAMERA USER GUIDE

III

Product Part Name Substance

Name

CAS

Number

HDZ408LIWV Crystal, Rectifier diode, TVS tube, Fuse,

Bearing, Hybrid stepper motor, Electric

conduction link, Cable, Power adaptor:

AC100V~240V to 36V 2.23A

Lead 7439-92-1

HDZ404LIWV Crystal, Rectifier diode, TVS tube, Fuse,

Bearing, Stepper motor, Electric conduction

link, Cable, Power adaptor: AC100V~240V to

36V 2.23A

Lead 7439-92-1

HDZ402LIWV Crystal, Rectifier diode, TVS tube, Fuse,

Bearing, Stepper motor, Electric conduction

link, Cable, Power adaptor: AC100V~240V to

36V 2.23A

Lead 7439-92-1

HDZ408LIKV Crystal, Rectifier diode, TVS tube, Fuse,

Bearing, Hybrid stepper motor, Electric

conduction link, Cable, Power adaptor:

AC100V~240V to 36V 2.23A

Lead 7439-92-1

HDZ404LIKV Crystal, Rectifier diode, TVS tube, Fuse,

Bearing, Hybrid stepper motor, Electric

conduction link, Cable, Power adaptor :

AC100V~240V to 36V 2.23A

Lead 7439-92-1

HDZ402LIKV Crystal, Rectifier diode, TVS tube, Fuse,

Bearing, Hybrid stepper motor, Electric

conduction link, Cable, Power adaptor :

AC100V~240V to 36V 2.23A

Lead 7439-92-1

Safety Instructions

Before installing or operating the unit, read and follow all instructions.

After installation, retain the safety and operating instructions for future

reference.

1. HEED WARNINGS - Adhere to all warnings on the unit and in

the operatinginstructions.

2. INSTALLATION

•Install in accordance with the manufacturer’s instructions.

•Installation and servicing should be performed only by qualified and

experiencedtechnicians to conform to all local codes and to

maintain your warranty.

•Do not install the unit in an extremely hot or humid location, or in a place

subject to dustor mechanical vibration. The unit is not designed to be

waterproof. Exposure to rain or water may damage the unit.

40X ZOOM IR PTZ DOME CAMERA USER GUIDE

•Any wall or ceiling mounting of the product should follow the

manufacturer’sinstructions and use a mounting kit approved or

recommended by the manufacturer.

3. POWER SOURCES - This product should be operated only from the type of

power sourceindicated on the marking label. If you are not sure of the type

of power supplied to your facility, consult your product dealer or local power

company.

HEAT

- Situate away from items that produce heat or are heat sources such

as radiators,

heat registers, stoves, or other products (including amplifiers).

5. WATER AND MOISTURE - (Indoor models only) Do not use this unit near

water or in anunprotected outdoor installation, or any area classified as a

wet location.

MOUNTING SYSTEM -

Use only with a mounting system

recommended by the

manufacturer, or sold with the product.

7. ATTACHMENTS - Do not use attachments not recommended by the

product manufacturer as they may result in the risk of fire, electric

shock, or injury to persons.

8. ACCESSORIES - Only use accessories specified by the manufacturer.

9. CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth forcleaning.

10.

SERVICING

- Do not attempt to service this unit yourself as opening or

removing covers

may expose you to dangerous voltage or other hazards.

Refer all servicing to qualifiedservice personnel.

11. REPLACEMENT PARTS - When replacement parts are required, be sure

the service

technician has used replacement parts specified by the

manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may result in fire, electricshock or other

hazards. Using replacement parts or accessories other than the original

manufacturers may invalidatethe warranty.

12.

DAMAGE REQUIRING SERVICE

- Unplug the unit from the outlet and refer

servicing to

qualified service personnel under the following conditions:

•When the power supply cord or plug is damaged.

•

If liquid has been spilled, or objects have fallen into the unit.

•

If the unit has been exposed to rain or water.

•If the unit does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operating instructions as an improper adjustment of other controls

may result in damage and will often require extensive work by a

qualified technician to restore the unit to its normal operation.

•

If the unit has been dropped or the enclosure has been damaged.

•When the unit exhibits a distinct change in performance - this

indicates a need forservice.

40X ZOOM IR PTZ DOME CAMERA USER GUIDE

13. SAFETY CHECK - Upon completion of any service or repairs to this unit,

ask the servicetechnician to perform safety checks to determine that the

unit is in proper operating condition.

Warranty and Service

Subject tothe terms and conditions listed on the Product warranty, during the

warranty periodHoneywell will repair or replace, at its sole option, free of charge,

any defective products returned prepaid.

In the event you have a problem with any Honeywell product, please call

Customer Service at

1.800.323.4576 for assistance or to request a Return

Merchandise Authorization (RMA) number. Be sure to have the model

number, serial number, and the nature of the problem available for the

technicalservicerepresentative.

Prior authorization must be obtained for all returns, exchanges, or credits.

Items

shipped to Honeywell without a clearly identified Return Merchandise

Authorization (RMA) number

may be refused.

List of Symbols

The following table contains a list of symbols that may appear on the camera:

Symbol

Explanation

The WEEE symbol.

This symbol indicates that when the end-user wishes to discard thisproduct,

it must be sent to separate collection facilities for recovery

and recycling. By

separating this product from other household-type

waste, the volume of waste

sent to incinerators or landfills will be reduced, and thus natural resources

will be conserved.

The UL compliance logo.

This logo indicates that the product has been tested and is listed byUL

(formerly Underwriters Laboratories).

The FCC compliance logo.

This logo indicates that the product conforms to FederalCommunications

Commission compliance standards.

The direct current symbol.

This symbol indicates that the power input/output for the product isdirect

current.

40X ZOOM IR PTZ DOME CAMERA USER GUIDE

The alternating current symbol.

This symbol indicates that the power input/output for the product isalternating

current.

The RCM compliance logo.

This logo indicates that the product conforms with Australian RCMguidelines.

The CE compliance logo.

This logo indicates that the product conforms to the relevant

guidelines/standards for the European Union harmonization

legislation.

The caution symbol.

This symbol indicates important information.

The protective earth (ground) symbol.

This symbol indicates that the marked terminal is intended forconnection to the

protective earth/grounding conductor.

40X ZOOM IR PTZ DOME CAMERA USER GUIDE

Table of Contents

1.Accessing the Camera ...................................................................1

Installing the Unified Tool.................................................................................................... 1

Discovering Your Camera on the Network .................................................................... 3

Assigning a New IP Address to Your Camera............................................................... 5

Configure IP Address Setting....................................................................................... 6

Configure DNS Server Address ................................................................................... 6

Upgrading the Camera’s Firmware .................................................................................. 6

Accessing the Camera from a Web Browser................................................................. 7

2.Logging In and Viewing Live Video........................................8

Logging In to the Web Client .............................................................................................. 8

Overview of the Live Interface ............................................................................................ 9

Configuring the Live Interface ........................................................................................... 9

Working in the Live Interface ............................................................................................11

Setting Up Live Video Streaming ....................................................................................12

Setting the Stream Type...............................................................................................12

Setting the Stream Protocol .......................................................................................12

Logging Out of the Web Client.........................................................................................12

3.PTZ Operation .................................................................................. 13

Configuring PTZ Functions ...............................................................................................13

Configuring Presets.......................................................................................................13

Configuring Tours...........................................................................................................14

Configuring Scans..........................................................................................................16

Configuring Patterns.....................................................................................................16

Configuring Auto Pan....................................................................................................17

Configuring PTZ Speed.................................................................................................17

Configuring Idle Motion...............................................................................................17

Configuring PowerUp Settings..................................................................................18

Configuring PTZ Limits ................................................................................................18

Configuring Time Tasks ...............................................................................................19

Restarting the PTZ..........................................................................................................20

Restoring Defaults..........................................................................................................20

Operating PTZ Controls ......................................................................................................20

40X ZOOM IR PTZ DOME CAMERA USER GUIDE

4.Playing Back Recorded Video................................................. 22

Overview of the Playback Interface ................................................................................22

Playback Controls...........................................................................................................22

Video Clip Controls.........................................................................................................23

Timeline ..............................................................................................................................23

Playing Back Recorded Video...........................................................................................24

Downloading Recorded Video ..........................................................................................25

Viewing Snapshots................................................................................................................26

5.Configuring Camera Settings ................................................ 27

Configuring Camera Conditions......................................................................................27

Conditions .........................................................................................................................27

Managing Profiles ..........................................................................................................31

Configuring Video Settings ...............................................................................................32

Configuring Video...........................................................................................................32

Configuring Snapshot...................................................................................................33

Configuring Overlay.......................................................................................................34

Configuring ROI...............................................................................................................38

Configuring Path.............................................................................................................38

Configuring Audio Settings...............................................................................................38

6.Configuring Network Settings ............................................... 40

Configuring TCP/IP .......................................................................................................40

Configuring Port..............................................................................................................42

Configuring RTSP ...........................................................................................................43

Configuring PPPoE........................................................................................................43

Configuring DDNS..........................................................................................................44

Configuring SMTP(Email) ...........................................................................................44

Configuring UPnP ..........................................................................................................45

Configuring SNMP.........................................................................................................46

Configuring Bonjour......................................................................................................47

Configuring IP Conflict.................................................................................................47

Configuring Multicast...................................................................................................48

Configuring 802.1x ........................................................................................................48

Configuring QoS..............................................................................................................49

Configuring Certificates...............................................................................................49

Configuring Access Platform .....................................................................................50

Configuring CA Creation..............................................................................................50

Andere Handbücher für HDZ402LIWV

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Sicherheitskamera Handbücher

Honeywell

Honeywell ACUIX Bedienerhandbuch

Honeywell

Honeywell 2450Cm Series Bedienungsanleitung

Honeywell

Honeywell HD251(X) Bedienungsanleitung

Honeywell

Honeywell NEXPTZ4520HD-NET Bedienungsanleitung

Honeywell

Honeywell HCD484LX Bedienungsanleitung

Honeywell

Honeywell HD2FC1X Bedienungsanleitung

Honeywell

Honeywell HB73 Bedienungsanleitung

Honeywell

Honeywell HCM574E Bedienungsanleitung

Honeywell

Honeywell HCW2S2 Bedienungsanleitung

Honeywell

Honeywell HCC10 Bedienungsanleitung

Honeywell

Honeywell HD8EXGCM18W Bedienungsanleitung

Honeywell

Honeywell HB74H(X) Bedienungsanleitung

Honeywell

Honeywell HD4USX Bedienungsanleitung

Honeywell

Honeywell HCU484 Bedienungsanleitung

Honeywell

Honeywell HC60WB4R2 Bedienungsanleitung

Honeywell

Honeywell HBD7S(X) Bedienungsanleitung

Honeywell

Honeywell HCX3W Bedienungsanleitung

Honeywell

Honeywell HD4D3S Bedienungsanleitung

Honeywell

Honeywell VISTA VBC-800PI Bedienungsanleitung

Honeywell

Honeywell 30 Series Bedienungsanleitung

Honeywell

Honeywell HD3DH Bedienungsanleitung

Honeywell

Honeywell HVD-735NT Bedienungsanleitung

Honeywell

Honeywell IPCAM-WIC1 Bedienungsanleitung

Honeywell

Honeywell HDZ402LIWV Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung