Honeywell Miller AirCore Oil & Gas Harness Bedienungsanleitung

I329 Rev. B / MFP9720203

15 November 2013

Table of Contents

1.0 Purpose.............................................................................................3

2.0 Harness Description and Features....................................................3-5

3.0 Requirements, Warnings and Limitations..........................................6

4.0 Harness Preparation......................................................................... 6-7

5.0 Use....................................................................................................8-10

6.0 Inspection..........................................................................................10

Labels................................................................................................27

Download instruction manuals and product specication sheets at:

www.millerfallprotection.com.

Télécharger les manuels d’instructions et les ches de spécications de produits depuis le site :

www.millerfallprotection.com.

Descargue el manual de instrucciones y las hojas de especicación del producto en:

www.millerfallprotection.com.

Table des Matières

1.0 Objectif............................................................................................. 11

2.0 Description et caractéristiques du harnais.................................... 11-13

3.0 Exigences, avertissements et limitations........................... 14

4.0 Préparation du harnais................................................. 14-15

5.0 Utilisation...........................................................................................16-18

6.0 Inspection..........................................................................................18

Étiquettes................................................................................... 27

Índice

1.0 Propósito..................................................................................... 19

2.0 Descripción y características del arnés.............................................19-21

3.0 Requisitos, advertencias y limitaciones.......................................... 22

4.0 Preparación del arnés...................................................................... 22-23

5.0 Uso....................................................................................................24-26

6.0 Inspección......................................................................................... 26

Etiquetas........................................................................................... 27

User Instruction Manual Supplement - English

This AirCore Oil & Gas Harness Supplement must be used in conjunction with

the Miller Harnesses and Body Belts User Instruction Manual (I119).

1.0 Purpose

The Miller AirCore Oil & Gas Harness was specically designed for oil eld service industry

operators that work on drilling and service rigs. This new line of AirCore harnesses provides the

ultimate in performance, comfort and exibility for long shifts and harsh work conditions. One

harness for every job.

2.0 Harness Description and Features

All persons using this equipment must read, understand and follow all

instructions. Failure to do so may result in serious injury or death. Do

not use this equipment unless you are properly trained.

WARNING

Miller AirCore Oil & Gas Harness and Accessories

Model No. Description

ACOG-TB* AirCore Harness with stretchable DuraFlex webbing, back D-ring and D-ring extension, combination

D-ring pad/shoulder pads, waist belt and lumbar back pad with restraint D-ring, mating buckle chest

strap with front D-ring, tongue buckle leg straps, cam buckle shoulder strap adjustment, two pull-free

lanyard rings, multiple elastic webbing/D-ring keepers, and mating buckle connectors for attachment of

accessories.

ACOG-TBBC* Same as ACOG-TB, plus includes bosun chair with two mating buckle connectors and two D-rings.

ACOG-TBSS* Same as ACOG-TB, plus includes seat sling with two mating buckle connectors and two D-rings.

ACOG-BC Bosun Chair with two mating buckle connectors and two D-rings.

ACOG-SS Seat Sling with two mating buckle connectors and two D-rings.

* Harnesses are available in two colors: green or blue.

Harnesses are available in Small/Medium (SM), Universal (U), or XXL/XXXL (23X). Easily vis-

ible, color-coded tabs indicate harness sizes.

Light Blue -

Small/Medium

Green -

Universal

Orange -

XXL/XXXL

User Instruction Manual Supplement - English

AirCore Oil & Gas Harness

~Unique Features~

Front D-Ring

for Climbing

Easily Visible,

Color-Coded Harness

Size Tag

Convenient Pull-Free

Lanyard Rings

Elastic Keepers

for D-Ring

Extension Storage

Integral

Label Pack

Wrap-Around Padding

for Added Comfort Belt with Soft

Leather Belt Loop

Padded Leg Straps

with Breathable,

Open-Core Padding

Technology

Integrated Shoulder/Back D-Ring

Padding with Breathable, Open-

Core Padding Technology

for Optimal Airow and Comfort

Convenient

Elastic Keepers

for Storage of

Seat Sling D-Rings

User Instruction Manual Supplement - English

Interchangeable

Seat Sling

with D-Rings

for Climbing Assistance

and Support

Back D-Ring Extension

for Fall Arrest

Back D-Ring

for Fall Arrest and

Rescue

Full Back Pad Support

with Breathable, Open-

Core Padding Technology

Belt with

Restraint

D-Ring

Convenient

Elastic Keepers

for Storage of

Seat Sling D-Rings

Also available with

Interchangeable Bosun Chair

with D-Rings

for Suspension Work

Mesh Back Shield to Minimize

Moisture Absorption

and Maintain Optimal

Air Circulation

User Instruction Manual Supplement - English

3.0 Requirements, Warnings

and Limitations

Users must read, understand and follow all requirements, warnings and limitations

provided in the Miller Harnesses and Body Belts instruction manual (I119) as well as this

supplement.

Fall protection connecting devices should be attached to the back D-ring or back D-ring

extension. A front D-ring may be used for fall arrest only in applications where the per-

sonal fall arrest system limits the maximum free fall distance to 2 ft. (0.6m) and limits the

maximum arrest force to 900 lbs. (4kN).

The back waist level D-ring is designed for restraint applications only.

A personal fall arrest system must be in place and connected at all times when either the

bosun chair or seat sling are in use.

The seat sling is designed for short, temporary support and assistance while climbing.

Use bosun chair and seat sling D-rings only for positioning during suspended work or

assisted climbing.

Always ensure that there is adequate fall clearance for the application. Remember that

the use of the D-ring extension will add 18 in. (458mm) to the fall clearance required.

4.0 Harness Preparation

User Instruction Manual Supplement - English

Attaching Bosun Chair

Lay harness on a at surface with the back side facing

up. Place the bosun chair on the harness just below

the belt and back pad with the webbing straps facing

up and the mating buckle connectors extending toward

the belt and back pad. Connect the mating buckle

component on the bosun chair with the corresponding

mating buckle compo-

nent on the harness

waist strap as shown.

Repeat for the oppo-

site side. Ensure that

webbing straps are not

twisted and that buckles

are securely and prop-

erly connected.

Attaching Seat Sling

Lay harness on a at surface with the back side facing

up. Place the seat sling on the harness just below the

belt and back pad with the webbing straps facing up

and the mating buckle connectors extending toward the

belt and back pad. Connect the mating buckle compo-

nent on the seat sling with the corresponding mating

buckle component on the harness waist strap as shown.

Repeat for the opposite

side. Ensure that

webbing straps are not

twisted and that buckles

are securely and prop-

erly connected.

User Instruction Manual Supplement - English

Don the harness ensuring that the harness is properly tted and all buckle connections are secure.

Refer to I119 - Miller Harnesses and Body Belts instruction manual.

Fall Arrest (Figs. 1, 2, 3 & 4)

A compatible connecting device and anchorage connector/anchorage must always be used in

conjunction with the harness to complete the personal fall arrest system and protect the worker

from a fall while working at heights. The bosun chair and seat sling are not designed to arrest a

fall.

The connecting device must be connected to the back D-ring or back D-ring extension on the

harness. When the D-ring extension is used, always remember to add 18 in. (458mm) to the fall

clearance calculation.

A two-legged shock-absorbing lanyard or dual self-retracting lifeline system is recommended for

climbing applications. Alternatively, a fall arrester attached to a vertical climbing system may be

connected to the front D-ring on the harness so long as the personal fall arrest system limits the

maximum free fall distance to 2 ft. (0.6m) and limits the maximum arrest force to 900 lbs. (4.0kN).

For non-climbing applications, a single shock-absorbing lanyard or self-retracting lifeline is

sufcient.

Suspension (Figs. 1 & 2)

For suspension work, connect the bosun chair D-rings to an approved, compatible suspension

system. A personal fall arrest system must be used in conjunction with the suspension system.

Climb-Assist (Fig. 3)

Connect the seat sling D-rings to an approved, compatible climb-assist system. The sling is

designed for temporary support during extended climbing applications. Do not use for suspension

work. A personal fall arrest system must be used in conjunction with the climb-assist system.

Restraint (Fig. 4)

The waist-level back D-ring is designed for restraint applications only. Simply attach a lanyard

between the restraint D-ring and the anchorage connector/anchorage. A personal fall arrest

system must be used in conjunction with the restraint system.

Note: Always read and follow the instructions provided with all system components

used in conjunction with the AirCore Oil & Gas Harness.

5.0 Use

New

Cam Buckle Adjustment

1) Grasp the loose end of web-

bing strap and pull to tighten.

Tuck excess webbing into elastic

keepers.

2) To loosen, press cam buckle

tab outward to release grip and

pull webbing strap out through

buckle.

User Instruction Manual Supplement - English

Fig. 1

Fig. 2

Fig. 3

Fig. 4

User Instruction Manual Supplement - English

Storage of Harness Components

and Connecting Device when Not in Use

Attach connecting device to pull-

free lanyard ring when not in use.

Always store D-ring extension in

elastic keeper when not in use. Do

not allow to hang freely.

Store seat sling D-rings in

elastic keepers when not in

use.

6.0 Inspection

Inspect harness, including bosun chair and/or seat sling, according to the Miller Harness

and Body Belts instruction manual. Always inspect for the absence of or alteration to any ele-

ments affecting the equipment form, t or function and check for any indications of damage that

may affect the integrity and operation of the product. If in doubt, contact the manufacturer.

Inhaltsverzeichnis

Sprachen:

Andere Honeywell Sicherheitssensor Handbücher

Honeywell

Honeywell Ex-Or MLS2021DF Installations- und Betriebshandbuch

Honeywell

Honeywell Miller Stopfall 7700A/YL/GP-1 Bedienerhandbuch

Honeywell

Honeywell Purple Peeper C7012A Bedienungsanleitung

Honeywell

Honeywell FireLite BG-12LSP Bedienungsanleitung

Honeywell

Honeywell C7962B Bedienungsanleitung

Honeywell

Honeywell IRD 1020.1 Bedienungsanleitung

Honeywell

Honeywell FlexGuard 5853 Bedienungsanleitung

Honeywell

Honeywell Minipeeper C7027A Bedienungsanleitung

Honeywell

Honeywell Friedland FGGA03 Series Bedienungsanleitung

Honeywell

Honeywell FG8M Bedienungsanleitung

Honeywell

Honeywell Activ8 DT Bedienungsanleitung

Honeywell

Honeywell FlexGuard 5853 Bedienungsanleitung

Honeywell

Honeywell H-S81-HS Bedienungsanleitung

Honeywell

Honeywell FlexGuard 5853 Betriebsanleitung

Honeywell

Honeywell AreaRAE Plus Bedienungsanleitung

Honeywell

Honeywell 5800PIR-COM Bedienungsanleitung

Honeywell

Honeywell C7076F Bedienungsanleitung

Honeywell

Honeywell Friedland FGGA08 Series Bedienungsanleitung

Honeywell

Honeywell C7076A Bedienungsanleitung

Honeywell

Honeywell 015610.01 Gebrauchsanweisung

Honeywell

Honeywell PANORAMA Series Bedienungsanleitung

Honeywell

Honeywell C7061M Bedienungsanleitung

Honeywell

Honeywell Miller Falcon MP50G-LE Montageanleitung

Honeywell

Honeywell SN0500 Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung

Solinst

Solinst 301 Bedienungsanleitung