Honeywell Gamewell-FCI Velociti MS-7AF Bedienungsanleitung

Description

The MS-7AF Addressable pull station is a non-coded, dual-action manual pull station with a

key-lock reset feature. It provides Gamewell-FCI intelligent ﬁre alarm control panels (FACP)

with one addressable alarm initiating input. The addressable module is housed inside the

pull station. The MS-7AF meets the ADAAG controls and operating mechanisms guidelines

(section 4.1.3[13]), and the ADA requirement for a 5 lb. maximum pull force to activate the

pull station. Operating instructions are molded into the pull station handle along with Braille

text. Molded Terminal numbers are also present. Conforms to ANSI/UL Standard 38 and ULC

Standard S528.

Ratings

Normal Operating Voltage: 24 VDC

Average Operating Current (LED Flash): 375 µA

Maximum Operating Current (LED On): 5 mA.

Temperature Range: 32°F to 120°F (0°C to 49°C)

Relative Humidity Range: 10% to 93% Non-condensing

Installation

The MS-7AF Addressable pull station can be surface mounted to an SB-10 or SB-I/O

surface backbox or semi-ﬂush mounted on a standard single-gang, double-gang or

4-inch (10.16 cm) square electrical box. The optional BG-TR trim ring can be used

if the MS-7AF is to be semi-ﬂush mounted.

Operation

To activate the dual-action pull station, push in and pull down on the handle. The

word ‘ACTIVATED’ appears after the handle is pulled down. This will remain until

the pull station is reset. The pull station includes one Single Pole, Single Throw

(SPST) Normally Open (N/O) switch which closes upon activation of the pull station.

Resetting the Pull Station

1. Insert the key into the lock and rotate 1/4turn counterclockwise.

2. Open the door until the handle returns to normal.

3. Close and lock the door.

NOTE: Closing the door automatically resets the switch to the ‘Normal’ position.

Opening the door will not activate or deactivate the alarm switch.

Wiring

CAUTION

Do not detach the door of the pull station during installation. The door of the pull

station cannot be reattached to the backplate after the backplate has already been

installed onto an electrical box.

CAUTION

Install the Gamewell-FCI MS-7AF addressable pull station in accordance with

these instructions, applicable NFPA standards, national and local Fire and Electri-

cal codes and the requirements of the AHJ (Authority Having Jurisdiction). Regu-

lar testing of the devices should be conducted in accordance with the appropriate

NFPA standards. Failure to follow these directions may result in failure of the

device to report an alarm condition. Honeywell is not responsible for devices that

have been improperly installed, tested or maintained.

ADA Compliance

For ADA compliance, if the clear ﬂoor space only allows forward approach to an

object, the maximum forward reach height allowed is 48 inches (121.92 cm). If the

clear ﬂoor space allows parallel approach by a person in a wheelchair, the maximum

side reach allowed is 54 inches (137.16 cm).

1 I56-3555-004

04-21

Velociti ®Series

MS-7AF Addressable Pull Station

Patented, U.S. Patent No. Des. 428,351; 6,380,846; Other Patents Pending

Document 9001-0010 I56-3555-004

SLC

From

FACP

To Next

Addressable

Device

P0241-00

MS-7AF

Addressable Pull Station

P0270-01

I56-3555-004

9001-0010

2 I56-3555-004

Gamewell-FCI®, Honeywell®, and Velociti®are registered trademarks of Honeywell International, Inc.

Setting the MS-7AF Address

The MS-7AF Addressable pull station is factory preset with address ‘00.’ Set the ad-

dress for the pull station by turning the rotary address switches on the addressable

module mounted inside the pull station. Only one device per address is allowed.

Multiple modules may not be set to the same address on the Signaling Line Circuit.

Once the address is set, record it in the space provided on the product ID label lo-

cated inside the pull station.

LED OPERATION

Normal:

Flash RED

Alarm:

Steady RED

Note: LED is visible

through translucent

handle.

Note – Opening the

pull station door

will not activate or

deactivate the alarm

switch.

P0104-00

Andere Honeywell Sicherheitssystem Handbücher

Honeywell

Honeywell Notifier NFS2-640/E Bedienungsanleitung

Honeywell

Honeywell NetAXS NX4S1 Bedienungsanleitung

Honeywell

Honeywell Optiflex Interactive Bedienungsanleitung

Honeywell

Honeywell Gamewell FCI E3 Series Bedienungsanleitung

Honeywell

Honeywell Manning GM-1 Handbuch

Honeywell

Honeywell ADEMCO Vista-12C Montageanleitung

Honeywell

Honeywell 032211.17 Bedienungsanleitung

Honeywell

Honeywell FBII OMNI 624 Montageanleitung

Honeywell

Honeywell MK V Bedienungsanleitung

Honeywell

Honeywell System 1500e Bedienungsanleitung

Honeywell

Honeywell FIRE-LITE ALARMS BG-12LR Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA-48A Bedienungsanleitung

Honeywell

Honeywell LYNXR-2 Series Security System Betriebsanleitung

Honeywell

Honeywell Ademco VISTA-32FB Betriebsanleitung

Honeywell

Honeywell Galaxy Dimension Bedienungsanleitung

Honeywell

Honeywell RF Panic Button V2 Bedienungsanleitung

Honeywell

Honeywell Friedland HISK1 Bedienungsanleitung

Honeywell

Honeywell TCPA1BS Bedienungsanleitung

Honeywell

Honeywell Galaxy 2-44 Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA-10P Montageanleitung

Honeywell

Honeywell ESSER TAM Bedienungsanleitung

Honeywell

Honeywell VISTA 21iPLTE Bedienungsanleitung

Honeywell

Honeywell LYNXR-I Series Betriebsanleitung

Honeywell

Honeywell VISTA-32FBPT Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung