Honeywell PID-95P Leitfaden

GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.

PID-95P,PID-95

Point Identification Device

APPROVED MEA

Approved 7300-1703:0135

SIGNALING

S521

Description

The Gamewell-FCI PID-95P addressable point identifica-

tion device is the interface between the non-powered, nor-

mally open, dry-contact devices and Gamewell-FCI’s 600

Series and ILI95-E3 Series®of analog addressable Fire

Alarm Control Panels (FACPs). Point identification devices

monitor a single Style B circuit, and are designed for con-

cealed mounting in an electrical backbox. The PID-95P can

be surface or flush mounted and has a visible LED for

alarm/annunciation.

Operation

The point identification device connects to the Signaling

Line Circuit (SLC) via two wires. The PID-95 will monitor,

via a two-wire supervised SLC circuit, contact-type devices

such as a waterflow switch or a manual station. Upon acti-

vation of the monitored device, the PID-95 will report its

address to the 600 Series and ILI95-E3 Series FACP via

the analog SLC. The control panel will then activate into all

alarm programmed outputs related to the PID-95.

Programming

The PID-95 is programmed by setting a single DIP switch,

easily accessible on the device’s printed circuit board. The

DIP switch sets the address of the device and the priority

interrupt (DIP SW #8). All other programming is accom-

plished at the FACP through a laptop computer or the con-

trol panel operator’s display. (600 Series only).

Standard Application

The PID-95 is the interface between the dry-contact type

devices and the SLC of the control panel. The PID-95 is a

means of connecting and identifying monitor points without

the use of conventional input modules at the main control

panel. The use of PID-95s can dramatically reduce the field

wiring required on many projects.

E3 Series® is a registered trademark of Honeywell International Inc.

Microsoft® Windows® is a registered trademark of Microsoft® Corporation.

Features

• Compatible with the Gamewell-FCI, 600 Series and

ILI95-E3 Series Systems

• Monitors dry-contact devices

• Includes an LED for alarm annunciation

• Field programmable

• Provides priority interrupt

• Offers a plate-mounted version available for surface or

flush mounting in a 4" x 4.688" (10.16 cm x 11.908 cm)

double gang backbox or 4” x (10.16 cm) square backbox

PID-95

PID-95P

GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

CS-2044 Rev. C page 2 of 2 www.gamewell-fci.com

Engineer’s Specifications

Addressable interface devices shall be provided for the

monitoring and supervision of contact type devices con-

nected to the Fire Alarm Control Panel. The devices shall

monitor a normally open dry contact. The addressable

interface devices shall communicate to the main control

panel via the analog addressable circuit. The interface

device shall be Gamewell-FCI PID-95P or PID-95.

Specifications

PID-95P

Standby Current: 0.0005A, 0.0008A

Alarm Current: 0.0015A

Operating

Temperature: 32°F to 120°F (0°C to 49°C)

Relative Humidity: 93%, non-condensing

Dimensions: 4" x 4.688" (10.16 cm x 11.908 cm),

double gang backbox

PID-95

Standby Current: 0.0005A, 0.0008 A

Alarm Current: 0.0015A

Operating

Temperature: 32°F to 120°F (0°C to 49°C)

Relative Humidity: 93%, non-condensing

Dimensions: 4" (10.16 cm) square backbox with

blank cover plate

Ordering Information

Part NumberDescription

PID-95 Addressable point identification device

for monitoring contact devices

PID-95P Addressable input interface device

mounted on 4.688" (11.908 cm) plastic plate

70839 Trim ring for flush-mounting on the PID-95P

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Sicherheitssystem Handbücher

Honeywell

Honeywell Ademco VISTA-50PUL Bedienungsanleitung

Honeywell

Honeywell ADEMCO LYNX XL Series Montageanleitung

Honeywell

Honeywell RCWL200A Bedienungsanleitung

Honeywell

Honeywell nfs2-3030 Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA-48A Bedienungsanleitung

Honeywell

Honeywell VISTA-21iP Montageanleitung

Honeywell

Honeywell VISTA-128BP Bedienungsanleitung

Honeywell

Honeywell LYNX Touch Series Montageanleitung

Honeywell

Honeywell SI800M Bedienungsanleitung

Honeywell

Honeywell ESSER Bedienungsanleitung

Honeywell

Honeywell Lyric Bedienungsanleitung

Honeywell

Honeywell Notifier NFS2-640/E Bedienungsanleitung

Honeywell

Honeywell FBII OMNI 600 Bedienungsanleitung

Honeywell

Honeywell Ademco VISTA-32FB Bedienungsanleitung

Honeywell

Honeywell Lynx Plus Series Bedienungsanleitung

Honeywell

Honeywell LYNX Touch SIA Bedienungsanleitung

Honeywell

Honeywell Code Encryptor II Bedienungsanleitung

Honeywell

Honeywell HS321S Bedienungsanleitung

Honeywell

Honeywell ADEMCO 4110XM Bedienungsanleitung

Honeywell

Honeywell Manning GM-JR Handbuch

Honeywell

Honeywell Lyric SIXSIREN Bedienungsanleitung

Honeywell

Honeywell 4219 Bedienungsanleitung

Honeywell

Honeywell Domonial Bedienungsanleitung

Honeywell

Honeywell LYNX Touch L7000 Series Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung