Honeywell ADEMCO 4500 Bedienungsanleitung

ADEMCO 4500

Thermostat

User Guide

N7972V1 5/05 Rev. A

TABLE OF CONTENTS

About the 4500 Thermostat...........................................................................................1

Saving Money on Energy Bills.................................................................................1

The 4500 Thermostat Provides Comfort and Convenience ....................................1

How the 4500 Thermostat Works with Your Present Thermostat ..............................2

Front Panel Controls and Indicator ..............................................................................3

Product Specifications ...................................................................................................4

Controlling the 4500 thermostat by Phone...................................................................5

To Enter the Thermostat Mode Menu by Phone.....................................................5

Adjusting the Set-Back Temperature of the 4500 thermostat ....................................6

Turning the Set-Back On and Off .................................................................................8

Using Two 4500 Thermostats with Your System .........................................................9

When Leaving Protected Premises for Extended Periods ..........................................10

Testing the Heating/Cooling System...........................................................................11

Testing the Pre-existing Thermostat ..........................................................................12

Federal Communications Commission (FCC) Part 15 Statement .............................13

Limited Warranty........................................................................................................14

About the 4500 Thermostat

The Ademco 4500 thermostat provides control for both heat and air

conditioning. It is intended for use with Ademco security systems

that include the enhanced 4286 phone module. You can set the 4500

thermostat using any Touch-tone phone, either on premises or

remotely. The 4500 thermostat is not a replacement for the existing

thermostat, which remains in the installation, but can be selected to

provide a “set-back” function whenever the system is in the ARMED

AWAY mode. The existing thermostat controls premises temperature

while the security system is DISARMED, or in ARMED STAY mode.

Saving Money on Energy Bills

An important benefit of combined climate control and security is

potential energy cost savings. During the heating season, you can

“set-back” the 4500 thermostat for times when you are away from

home by putting the security system in the ARMED AWAY mode.

Our set-back feature lets you turn down the thermostat when the

house is empty automatically, when you arm the security system in

the ARMED AWAY mode.

During the cooling season, you can set the 4500 thermostat for a

higher temperature than the existing thermostat for times when you

are away from home, to save on cooling costs by putting the security

system in the ARMED AWAY mode.

In both cases you can call home to adjust the set-back temperature

that is in effect while the system is in the armed away mode.

The 4500 Thermostat Provides Comfort and Convenience

Heat or air conditioning in vacation homes can be remotely set and

monitored by phone. For example, heat can be turned up at a ski

cabin before guests arrive. The owner can also call-in to the system to

check that the indoor temperature is being maintained while the

premises are vacant. Users can set the air conditioning by calling

home just before leaving work. Once access to the security system

has been established, the ambient temperature will automatically be

announced if the installer has programmed this function. The

following sections describe how to use the 4500 thermostat.

How the 4500 Thermostat Works With Your

Present Thermostat

The 4500 thermostat works in combination with the original

thermostat installed on the premises.

While the premises is occupied, the security system is usually armed

STAY or DISARMED, and the 4500 thermostat will be inactive. The

original thermostat can be used as usual to set and adjust your

premises temperature.

When controlling a heating system, the set-back temperature setting

of the 4500 thermostat must always be set to a lower temperature

than the original thermostat. This way, the 4500 thermostat will

turn down the heat when the security system is ARMED AWAY.

Alternately, when controlling an air conditioning system, the set-back

temperature setting of the 4500 thermostat must always be set to a

higher temperature than the original thermostat. This way, the 4500

thermostat will allow the ambient temperature to rise when the

security system is ARMED AWAY.

If the pre-existing thermostat has a built-in clock and schedule, the

schedule can be used to set the times you “wake,” “leave,” “return,”

and “sleep.”

Note: The “leave” time should be set for the latest time that you

would expect to leave the premises. The “return” time should be set

to the earliest time you expect to arrive at the premises. If you leave

earlier or return later than scheduled times, the 4500 thermostat will

adjust the temperatures accordingly.

In summary, the 4500 thermostat allows you to:

• Set back the temperature (to that set in the 4500 thermostat)

automatically by arming in the AWAY mode when leaving home.

• Resume normal temperature (as set by the existing thermostat)

automatically by DISARMING the system when returning home.

• Check the temperature by phoning in from a remote location.

Front Panel Controls

As you can see from Figure 1 below, there are two controls and one

indicator on the front panel of the 4500 thermostat:

HEAT <> COOL BYPASS <> ACTIVE

123

Figure 1. 4500 Thermostat Controls and Indicator

1. HEAT/COOL Switch

This switch is used to set the control mode of the 4500 thermostat.

The mode can be set to either HEAT or COOL. This is the same as

found on most thermostats. For premises that only have heat or air

conditioning but not both, the proper mode should be selected with

this switch, and the setting should not be changed.

2. ACTIVE/BYPASS Switch

This switch is used to activate and deactivate the 4500 thermostat.

When this switch is set to the ACTIVE mode, the 4500 thermostat is

able to set back the room temperature when the security system is

ARMED AWAY. BYPASS is used to bypass the 4500 thermostat.

When bypassed, the 4500 thermostat cannot change the room

temperature.

• To use fan alone on your thermostat, put the 4500 in the BYPASS position.

• You will not be able to adjust room temperature by phone when the 4500

thermostat front panel switch is in BYPASS position.

Front Panel Controls (cont’d)

There are several uses for the BYPASS switch function:

• Allows the user to go back to their original thermostat at any

time.

• Allows heating/air conditioning service people to bypass the 4500

thermostat during servicing and maintenance work.

• Allows switching back to the original thermostat if the security system is

not working or is being serviced.

3. ACTIVE/ BYPASS Controls Indicator

This yellow LED indicator shows the status of the 4500 thermostat.

• When the ACTIVE/BYPASS switch is in the ACTIVE position, the

LED will be steadily on.

• When in BYPASS, the LED will be steadily off.

If there is a problem with the wirin

to the 4500 thermostat, the LED will flash,

and you should call your alarm installation or service company for service.

Product Specifications:

Operating Range: 32°

°°

°to 122°

°°

°F., 0°

°°

°to 50°

°°

°C.

Temperature Setting Range: 45°

°°

°to 99°

°°

°F., 7°

°°

°to 37°

°°

°C.

Air Conditioner Compressor Off Cycle: 5 minutes minimum

Physical Dimensions: 6-3/16” by 2-7/8” by 1-1/4”

The 4500 measures the temperature of the surrounding air as well as the wall

that it is mounted on. It may provide a slightly different reading than a

thermometer or another thermostat mounted nearby.

This can be due to nearby sources of heat or drafts, sunlight, and varying

accuracy of existing thermostats. Unless the reading is off by more than

4°F, this should not be a cause for concern.

Controlling the 4500 Thermostat by Phone

The phone access feature of the Honeywell security system provides a

number of capabilities to the user:

• To adjust the ARMED AWAY set back temperature of the 4500

thermostats over any phone.

• To turn off the set back function for a single ARMED AWAY

period, or turn it on again if necessary.

• To control two 4500 thermostats in a single installation.

A Thermostat Mode voice menu can be activated after accessing the

security system by phone.

To Enter the Thermostat Mode Menu By Phone

1. Obtain access to your security system by phone according to the

instructions for phone access provided with your security system.

You will need to enter the 2-digit phone code provided by your

installer, and your 4-digit user code when you are calling from

outside, or whenever prompted by the system.

2. You will now hear the announcement of the security system

status followed by the ambient room temperature (if installer

has programmed this particular option).

3. Wait until the security system completes the status announce-

ments. When prompted by the system, press:

The security system phone access module will announce all words

denoted by quotation marks and italicized as follows:

• “THERMOSTAT MODE,” followed by whether “SET-BACK” is

“ON” or “OFF”, and whether the 4500 thermostat is set for

“HEAT MODE” or “COOL MODE.”

• The temperature setting of the 4500 thermostat that is in effect

when the security system is ARMED AWAY.

A menu of thermostat related end-user commands will be annunciated.

The following sections: Adjusting the Set-Back Temperature of the

4500 thermostat, Turning the Set-Back On and Off, Using Two

4500 thermostats With Your Security System, and Exiting

Thermostat Mode explain the use of the thermostat mode commands.

# 9 9

Adjusting the Set-Back Temperature

of the 4500 Thermostat

Keep in mind that the on-premises existing thermostat is set to the

desired temperature for when the building is occupied. The 4500

thermostat is used to set the set-back temperature for when the

premises is unoccupied and the security system is in the ARMED

AWAY mode.

The 4500 thermostat is set from any Touch-tone phone, either on-

premises, or by calling in when away.

1. Make sure that the front panel switches on the 4500 thermostat

are set correctly.

• The ACTIVE/BYPASS switch must be set to ACTIVE, and

• The HEAT/COOL switch must be set for the desired mode of

operation.

2. Enter thermostat mode as described on page 5. A menu of user

commands will be announced.

3. When you hear the prompt, “To change temperature, enter 1,”

Press during a pause in the thermostat mode menu

announcement.

The system will announce “Temperature set to 65,” for example.

4. Next, it will announce “Enter new temperature.”

If you want to keep the present set-back temperature, 65 degrees

in this example, just press .

5. If you want to change the set-back temperature point, you can

then enter a new temperature:

for example.

You have now set your unoccupied premises temperature to 61

degrees. The system will then announce the change of set point.

✴

6 1

Setting the Set-Back Temperature

of the 4500 Thermostat (cont’d)

6. The new ARMED AWAY (set-back temperature) point will be

announced. This is the temperature the 4500 thermostat will

maintain when you are away from the premises. The set-back is

turned on only when the security system is ARMED AWAY.

The system will announce “Armed away temperature set to 61.”

7. Next, it will repeat “Enter new temperature.”

If you want to keep the present set point, 61 degrees in this

example, just press .

If you make an out-of-range temperature setting, a buzzer sound

will indicate to you that you made a mistake, and you will be

prompted again to enter the desired set point.

You have now set your ARMED AWAY temperature to 61 in this

case, and the phone module will echo back the change to verify.

8. If you are all done with the settings, and now want to arm or

disarm the security system, wait for the “To exit enter zero”

menu announcement and press .

9. At this point, you have adjusted the set-back temperature and

the new setting has been echoed back. Your options now are:

• to wait for the menu to be announced again in case you want to

review or change the thermostat settings.

• to just hang up the phone.

✴

Turning the Set-Back On and Off

The set-back feature of the 4500 thermostat works automatically

when you leave the premises and the security system is ARMED

AWAY.However, sometimes you may want to override this feature.

You can turn off the set-back at any time, while still on the premises

or off.

For example, on a very hot day, you may want the premises

temperature to be restored to the more comfortable normal settings

by the time you return home from work instead of remaining at the

more economical set-back temperature until you arrive. You would do

the following:

1. Call the security system before returning home.

2. Enter your 2-digit phone code and 4-digit user code as requested

by the system.

3. Press to enter the Thermostat Mode Menu.

4. At the “To Turn Set-Back Off, Enter 3” prompt, press .

This command temporarily deactivates the set-back function until

you return home.

5. You can exit the Thermostat Mode at this point by pressing

at the exit prompt.

6. The premises cooling system will now be under the original

thermostat’s control with the premises temperature being lowered

to the more comfortable setting.

When you turn off the set-back, you are only doing so temporarily.

When you return home the thermostat mode menu resets itself

automatically so that when you again exit the premises with the

security system in the ARMED AWAY state, the premises

temperature will go to the programmed 4500 thermostat setting.

In the example above, if you change your mind and decide not to

return home early, you can turn the thermostat set-back to on again

by phone.

# 9 9

Inhaltsverzeichnis

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell T7200D Bedienungsanleitung

Honeywell

Honeywell S963D Bedienungsanleitung

Honeywell

Honeywell CHRONOTHERM T4700 Bedienungsanleitung

Honeywell

Honeywell Q682B Bedienungsanleitung

Honeywell

Honeywell T834C Bedienungsanleitung

Honeywell

Honeywell lyric round Bedienungsanleitung

Honeywell

Honeywell T921A Bedienungsanleitung

Honeywell

Honeywell TRUEZONE HZ322 Bedienungsanleitung

Honeywell

Honeywell TB7600 Gebrauchs- und Pflegehandbuch

Honeywell

Honeywell EnergyPro T8665C Bedienungsanleitung

Honeywell

Honeywell T9 Bedienungsanleitung

Honeywell

Honeywell T8631A Bedienungsanleitung

Honeywell

Honeywell TB7200 Series Gebrauchs- und Pflegehandbuch

Honeywell

Honeywell TL6120 Bedienungsanleitung

Honeywell

Honeywell TheraPro HR90 Bedienungsanleitung

Honeywell

Honeywell T4398A1021 - Electric Heat Thermostat Bedienungsanleitung

Honeywell

Honeywell CHRONOTHERM CT1950 Bedienungsanleitung

Honeywell

Honeywell RTH2510 Series Bedienungsanleitung

Honeywell

Honeywell TH2110 Bedienungsanleitung

Honeywell

Honeywell VisionPRO THM5421C1008 Bedienungsanleitung

Honeywell

Honeywell T Series Bedienungsanleitung

Honeywell

Honeywell RTHL2310Series Bedienungsanleitung

Honeywell

Honeywell T810C Bedienungsanleitung

Honeywell

Honeywell TL8130A1005 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung